Abstract:This study aims to develop an integrated computational framework for the reliability-based design optimization (RBDO) of wind turbine drivetrains to assure the target reliability under wind load and gear manufacturing uncertainties. Gears in wind turbine drivetrains are subjected to severe cyclic loading due to highly variable wind loads that are stochastic in nature. Thus, the failure rate of drivetrain systems is reported to be higher than the other wind turbine components, and improving drivetrain reliability is critically important in reducing downtime caused by gear failures. In the numerical procedure developed in this study, a wide spatiotemporal variability for wind loads is considered using 249 sets of wind data to evaluate probabilistic contact fatigue life in the sampling-based RBDO. To account for wind load uncertainty in evaluation of the tooth contact fatigue, multiple drivetrain dynamics simulations need to be run under various wind load scenarios in the RBDO process. For this reason, a numerical procedure based on the multivariable tabular contact search algorithm is applied to the modeling of wind turbine drivetrains to reduce the overall computational time while retaining the precise contact geometry required for considering the gear tooth profile optimization. An integrated computational framework for the wind turbine drivetrain RBDO is then developed by incorporating the wind load uncertainty, the rotor blade aerodynamics model, the drivetrain dynamics model, and the probabilistic contact fatigue failure model. It is demonstrated that the RBDO optimum for a 750 kW wind turbine drivetrain obtained using the procedure developed in this study can achieve the target 97.725% reliability (2 sigma quality level) with only a 1.4% increase in the total weight from the baseline design, which had a reliability of 8.3%. Furthermore, it is shown that the tooth profile optimization, tip relief introduced as a design variable, prevents a large increase of the face width that would result in a large increase in the weight (cost) of the drivetrain in order to satisfy the target reliability against the tooth contact fatigue failure.

Reducing cost uncertainty in the drivetrain design decision with a focus on the operational phase

Life Cycle Assessment of Various PMSG-Based Drivetrain Concepts for 15 MW Offshore Wind Turbines Applications

Reliability-based design optimization of wind turbine drivetrain with integrated multibody gear dynamics simulation considering wind load uncertainty

Improving Wind Turbine Drivetrain Designs to Minimize the Impacts of Non-Torque Loads

A Systems Engineering Analysis of Three‐point and Four‐point Wind Turbine Drivetrain Configurations

Wind turbine drivetrains: state-of-the-art technologies and future development trends

Fatigue Reliability Analysis of Wind Turbine Drivetrain Considering Strength Degradation and Load Sharing Using Survival Signature and FTA

Analysing the cost impact of failure rates for the next generation of offshore wind turbines

Loading Methodology and Dynamics Analysis of the Digital-Servo Hydraulic Cylinders Group in Large Wind Turbine Drivetrain Test Bench

An Integrated Framework of Drivetrain Degradation Assessment and Fault Localization for Offshore Wind Turbines

A Preventive Maintenance Planning Approach for Wind Converters

Fleetwide data-enabled reliability improvement of wind turbines

Load Torque Estimation Method to Design Electric Drivetrains for Offshore Pipe Handling Equipment

Estimation of Internal Gearbox Loads for Condition Monitoring in Wind Turbines Based on Physical Modeling

Reliability-based leading edge erosion maintenance strategy selection framework

Multibody Dynamic Analysis of a Wind Turbine Drivetrain in Consideration of the Shaft Bending Effect and a Variable Gear Mesh Including Eccentricity and Nacelle Movement

Sensor Screening Methodology for Virtually Sensing Transmission Input Loads of a Wind Turbine Using Machine Learning Techniques and Drivetrain Simulations

Research on wind turbines preventive maintenance strategies based on reliability and cost-effectiveness ratio

Online condition monitoring of floating wind turbines drivetrain by means of digital twin