Abstract:This study aims to develop an integrated computational framework for the reliability-based design optimization (RBDO) of wind turbine drivetrains to assure the target reliability under wind load and gear manufacturing uncertainties. Gears in wind turbine drivetrains are subjected to severe cyclic loading due to highly variable wind loads that are stochastic in nature. Thus, the failure rate of drivetrain systems is reported to be higher than the other wind turbine components, and improving drivetrain reliability is critically important in reducing downtime caused by gear failures. In the numerical procedure developed in this study, a wide spatiotemporal variability for wind loads is considered using 249 sets of wind data to evaluate probabilistic contact fatigue life in the sampling-based RBDO. To account for wind load uncertainty in evaluation of the tooth contact fatigue, multiple drivetrain dynamics simulations need to be run under various wind load scenarios in the RBDO process. For this reason, a numerical procedure based on the multivariable tabular contact search algorithm is applied to the modeling of wind turbine drivetrains to reduce the overall computational time while retaining the precise contact geometry required for considering the gear tooth profile optimization. An integrated computational framework for the wind turbine drivetrain RBDO is then developed by incorporating the wind load uncertainty, the rotor blade aerodynamics model, the drivetrain dynamics model, and the probabilistic contact fatigue failure model. It is demonstrated that the RBDO optimum for a 750 kW wind turbine drivetrain obtained using the procedure developed in this study can achieve the target 97.725% reliability (2 sigma quality level) with only a 1.4% increase in the total weight from the baseline design, which had a reliability of 8.3%. Furthermore, it is shown that the tooth profile optimization, tip relief introduced as a design variable, prevents a large increase of the face width that would result in a large increase in the weight (cost) of the drivetrain in order to satisfy the target reliability against the tooth contact fatigue failure.

Wind turbine drivetrains: state-of-the-art technologies and future development trends

Life Cycle Assessment of Various PMSG-Based Drivetrain Concepts for 15 MW Offshore Wind Turbines Applications

Improving the Reliability and Energy Production of Large Wind Turbine with a Digital Hydrostatic Drivetrain

Study on Speed and Torque Control of a Novel Hydromechanical Hybrid Transmission System in Wind Turbine

Design and Control of the Mechanical-Hydraulic Hybrid Transmission System in Wind Turbines

Improving Wind Turbine Drivetrain Designs to Minimize the Impacts of Non-Torque Loads

Loading Methodology and Dynamics Analysis of the Digital-Servo Hydraulic Cylinders Group in Large Wind Turbine Drivetrain Test Bench

Reducing cost uncertainty in the drivetrain design decision with a focus on the operational phase

A Novel Hydraulic Transmission Solution to Large Offshore Wind Turbine: Design and Control Strategy

Tribological advancements for reliable wind turbine performance

A Systems Engineering Analysis of Three‐point and Four‐point Wind Turbine Drivetrain Configurations

Trends in Wind Turbine Generator Systems

Hybrid Power Transmission Technology in a Wind Turbine Generation System

RETRACTION: Design and Experiments of a Hybrid Wind Turbine Drive Train using both Hydraulic and Mechanical Transmissions

Modern electric machines and drives for wind power generation: A review of opportunities and challenges

Grand challenges in the design, manufacture, and operation of future wind turbine systems

Reliability-based design optimization of wind turbine drivetrain with integrated multibody gear dynamics simulation considering wind load uncertainty

Electrical Generators for Large Wind Turbine: Trends and Challenges

A Novel Hydraulic-Mechanical Hybrid Transmission in Tidal Current Turbines

Flexible Dynamic Modeling and Analysis of Drive Train for Offshore Floating Wind Turbine

Research on Transmission Characteristics and Torsional Vibration Control of Hybrid Transmission Wind Turbines