Abstract:A dual-coil electromagnetic forming (EMF) method assisted by radial Lorentz force was proposed herein to achieve the die forming of deep-cavity sheet metal parts. The objective of this study was to certify the extent to which the formability and forming accuracy can be improved by the proposed method. For comparative study, a single-coil EMF system without radial Lorentz force was also utilized. To develop the deformation process, the experiments and simulations of deep-cavity aluminum workpieces under a wide range of voltage combinations were conducted by the single-coil and dual-coil EMF, respectively. The experimental results showed that the dual-coil EMF resulted in the formation of the deep-cavity workpiece with high forming accuracy, maximum die-fitting gap of 0.35 mm, and more uniform thickness distribution. In contrast, the workpiece tended to crack without contacting the die by the single-coil EMF. Based on the simulation results, dynamic deformation behaviors of the deep-cavity workpieces were demonstrated and the underlying mechanisms of the improved formability and forming accuracy were explained. Moreover, the process window of die-fitting gap control indicated that the fittability could be controlled by adjusting the voltage combinations of the dual-coil EMF, and the corresponding optimum voltage of Coil-2 (V2) that contributed to high forming accuracy decreased with the increase of the voltage of Coil-1 (V1). Therefore, the proposed dual-coil EMF exhibits more flexibility and efficiency for producing the deep-cavity sheet metal part with a higher forming accuracy than the single-coil EMF, extending the potential application of the conventional EMF due to the utilization of multiple coils.

Parametric Study of the Design Variables Involved in the EMF Process of Sheet Metal

Finite Element Analysis of Electromagnetic Forming Process and Optimization of Process Parameters Using RSM

Numerical modeling of industrial parts manufacturing using electromagnetic hemming process

On electromagnetic forming processes in finitely strained solids: Theory and examples

Numerical Study on Electromagnetic Hydraulic Forming Process to Overcome Limitations of Electromagnetic Forming Process

Design and Experiments of Electromagnetic Heating Forming Technology

Study on forming uniformity of multi-electromagnetic forming (EMF) of aluminum sheet metal

Numerical and Experimental Investigation of the Impact of the Electromagnetic Properties of the Die Materials in Electromagnetic Forming of Thin Sheet Metal

Numerical Modeling and Analysis of an Electromagnetic Device Using a Weakly Coupled Magnetostatic-Mechanical Formulation and the 2D Finite Element Method

Effects of Current Frequency on Electromagnetic Sheet Metal Forming Process

Investigation of the Role of the Initial Workpiece Diameter in Deformation Control in Electromagnetic Sheet Forming

Coil-less electromagnetic forming process with uniform-pressure characteristics for shaping sheet metals

Distributed Actuation Effectiveness of Flexible Parabolic Cylindrical Panels

Electro-dynamics, Micro-Actuation and Design of Arc Stators in an Ultrasonic Curvilinear Motor

Axially Movable Electromagnetic Forming System for Large-Scale Metallic Sheet

Development of an FEM for the Combined Electromagnetic and Hydraulic Forming Process Based on Experimental Data

Feasibility of Electromagnetic Pulse-Assisted Incremental Drawing with a Radial Magnetic Force for AA-5052 Aluminum Alloy Sheet

Improvement on formability and forming accuracy in electromagnetic forming of deep-cavity sheet metal part using a dual-coil system

A versatile electromagnetic actuator for sheet and tube flanging: Process principle, simulation, and experimental validation

Electromagnetic forming—A review