Abstract:Ultrasonic linear arrays have great potential to generate high-quality three-dimensional (3D) images by scanning the array. However, the generated images suffer from low resolution in the elevation plane, limiting the image quality for a reliable 3D Non-Destructive Testing (NDT) inspection. Although several ultrasonic imaging methods have been implemented to inspect different types of defects, there has been limited research to characterise surface-breaking cracks (SBCs) in 3D quantitatively. To improve the characterisation of surface-breaking cracks (SBCs), a 3D hybrid imaging method is proposed by combining the Half Skip Total Focusing Method (HSTFM) and the Synthetic Aperture Focusing Technique (SAFT) using a linear array. This paper proposed the implementation of an array with a reduced element length for full matrix capture (FMC) data acquisition. In conjunction with the hybrid imaging method, a reduced element array enables the utilisation of the information from a broad ultrasonic beam in the elevation direction to achieve improved image resolution. The imaging capability is assessed via a point spread function (PSF) as well as numerical simulations. From the PSF measurements, the image resolution is shown to improve with the smaller element length of the array, which is attributable to the combination of wide beamwidth and hybrid imaging method. Thereafter, experimental validation was performed with arrays of different elevation lengths, where an excellent match with the numerical results was observed. Furthermore, the crack sizing was performed using a 6-dB-drop rule, which assisted in accurately predicting the shape and size of the SBCs and is shown to measure the depth of SBCs with greater confidence. It is shown that a reduced array elevation with the hybrid imaging method and sizing method yields improved image resolution contrary to conventional linear arrays. This approach can offer a significant improvement in manifesting complete comprehension of the spatial defect relationship, enabling NDT engineers to analyse the inspection results quantitatively in 3D for progressive reliability.

Imaging of three-dimensional crack open/closed distribution by nonlinear ultrasonic phased array based on fundamental wave amplitude difference

A Study of Inner Crack Testing with the Laser Phased Array Method.

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Reference-free Crack Detection and Localization by Nonlinear Laser Ultrasonic.

Numerical Study for Surface-breaking Crack Detection on A Cylinder Using Laser-generated Ultrasound

3D ultrasonic imaging of surface-breaking cracks using a linear array

Imaging of Closed Cracks by Water-Coupled Sensor Array Based on Nonlinear Lamb Waves

Evaluation of the shape and size of 3D cracks using microwaves

Nde Of Small 3-D Surface Fatigue Cracks In Metals By Microwaves

A Method of Sizing Small Fatigue Crack in Stainless Steel by Microwaves(NDE4)

Quantitative Evaluation of Closed Cracks on the Surface of Stainless Steel by Microwaves

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Quantitative Detection of Small Crack by Nonlinear Laser Ultrasonics

Defect detection using the phased-array laser ultrasonic crack diffraction enhancement method

Detection of Longitudinal Cracks with a Serrated Columnar Phased Array Transducer: A Simulation Study

A Method for Nondestructive Evaluation of Crack Depth on Metal Surface by Microwaves

Micro-Crack Detection Of Nonlinear Lamb Wave Propagation In Three-Dimensional Plates With Mixed-Frequency Excitation

A Method for Sizing Small Fatigue Cracks in Stainless Steel Using Microwaves

Imaging cracks in bones using acoustic nonlinearity: A simulation study

Virtual source total focusing method for crack detection in complex curved structure

Nonlinear Ultrasonic Testing of Fatigue Crack for Metal Component