Fast-response humidity sensor based on laser printing for respiration monitoring

Gong Wang,Yang Zhang,Han Yang,Wei Wang,Yun-Zhi Dai,Li-Gang Niu,Chao Lv,Hong Xia,Tao Liu

DOI: https://doi.org/10.1039/c9ra10409g

IF: 4.036

2020-01-01

RSC Advances

Abstract:This work reports a facile and inexpensive laser printing fabrication of PEDOT:PSS micron line as a humidity sensor for respiration monitoring.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Fast-Response Non-Contact Flexible Humidity Sensor Based on Direct-Writing Printing for Respiration Monitoring

Xiaojun Chen,Kanglin Ma,Jialin Ou,Deyun Mo,Haishan Lian,Xin Li,Zaifu Cui,Yihui Luo

DOI: https://doi.org/10.3390/bios13080792

2023-08-08

Biosensors

Abstract:Respiratory monitoring is crucial for evaluating health status and identifying potential respiratory diseases such as respiratory failure, bronchitis, and pneumonia. Humidity sensors play a significant role in this regard, and efforts are being made to improve their performance. However, achieving ideal sensor parameters such as sensitivity, detection range, and response speed is challenging. In this work, we propose a flexible preparation method for a double-layer humidity sensor using PDMS as a substrate and a GNP/MWCNT composite material as a sensor element. This sensor exhibits high sensitivity (1.4 RH-1), a wide detection range (20–90%), ultra-fast response (0.35 s) and recovery (2.5 s), high repetitiveness (500 cycles), good long-term stability, and excellent flexibility. Due to these advantages, this sensor has potential applications in real-time clinical and home medical care, such as accurate human respiratory monitoring and non-invasive skin humidity monitoring. Hence, this humidity sensor can be a powerful tool to monitor respiratory moisture levels for diagnosing and treating respiratory diseases effectively.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation
A novel SAW humidity sensor based on electrosprayed polymerized electrolyte film

Sheng Lei,Yuquan Chen,Yang Li

DOI: https://doi.org/10.1109/ICMTMA.2011.59

2011-01-01

Abstract:A novel humidity sensor with high sensitivity, short response time and excellent reproducibility was developed. The sensor utilized single-port surface acoustic wave resonator (SAWR) with high resonance frequency as basic component. The silicone-containing polyelectrolyte was electro sprayed onto SAWR surface to form humidity-sensitive film with micro/nano-scale. The experimental results showed that the humidity sensor made with the novel method has a wide detection range at least from 10% to 97% RH, a high sensitivity and up-to 1% RH measurement accuracy and a short response time less than 3s.
Laser Direct Writing of Ga 2 O 3 /liquid Metal-Based Flexible Humidity Sensors

Songya Cui,Yuyao Lu,Depeng Kong,Huayu Luo,Liang Peng,Geng Yang,Huayong Yang,Kaichen Xu

DOI: https://doi.org/10.29026/oea.2023.220172

IF: 8.9329

2023-01-01

Opto-Electronic Advances

Abstract:Flexible and wearable humidity sensors play a vital role in daily point-of-care diagnosis and noncontact human-machine interactions. However, achieving a facile and high-speed fabrication approach to realizing flexible humidity sensors remains a challenge. In this work, a wearable capacitive-type Ga2O3/liquid metal-based humidity sensor is demonstrated by a one-step laser direct writing technique. Owing to the photothermal effect of laser, the Ga2O3-wrapped liquid metal particles can be selectively sintered and converted from insulative to conductive traces with a resistivity of 0.19 Ω·cm, while the untreated regions serve as active sensing layers in response to moisture changes. Under 95% relative humidity, the humidity sensor displays a highly stable performance along with rapid response and recover time. Utilizing these superior properties, the Ga2O3/liquid metal-based humidity sensor is able to monitor human respiration rate, as well as skin moisture of the palm under different physiological states for healthcare monitoring.
Facile and Cost-Effective Fabrication of Highly Sensitive, Fast-Response Flexible Humidity Sensors Enabled by Laser-Induced Graphene

Sirui Liu,Rui Chen,Rui Chen,Chongjie Jiang,Chen Zhang,Dongyang Chen,Wei Zhou,Songyue Chen,Tao Luo

DOI: https://doi.org/10.1021/acsami.3c12392

IF: 9.5

2023-12-05

ACS Applied Materials & Interfaces

Abstract:The need to simplify fabrication processes and reduce costs for high-performance humidity sensors is increasingly vital, especially in fields such as healthcare and agriculture. This study introduces a simple and cost-effective approach using laser-induced graphene (LIG) on a polyimide film to create highly sensitive and fast-response flexible humidity sensors. The LIG acts as the electrode, while the porous polyimide between the interdigital LIG electrodes serves as the humidity sensing...

materials science, multidisciplinary,nanoscience & nanotechnology
Fast response, gas-permeable flexible humidity sensor based on PEDOT:PSS-GO for respiration monitoring

Rui Ge,Bin Shi,Xiaobo Liu,Bing Yin

DOI: https://doi.org/10.1007/s10854-024-12540-5

2024-04-11

Journal of Materials Science Materials in Electronics

Abstract:With the development of the internet of things technology, sensors have played an important role in aerospace, industry, agriculture, medical and other fields. Especially in the aspect of wearable respiratory monitoring, real-time monitoring of multiple respiratory physiological parameters through intelligent sensors enable people to achieve early prevention and timely diagnosis of respiratory diseases. However, most of the humidity sensors have the disadvantages of poor permeability, long response time and narrow detection range. Therefore, this paper introduced a flexible humidity sensor with a wide detection range and fast response time for respiratory monitoring. The sensor used PEDOT:PSS-GO composite material as humidity sensitive material. Due to the addition of GO, the sensor had a wide linear detection range of humidity (35–80%RH) and a short response/recovery time (0.53/0.8 s). Moreover, the sensor used the micromesh structure of PI as the substrate, which had better flexibility and permeability and the sensor was easy to attach to complex surfaces such as masks or human skin. Based on these excellent sensing characteristics, the humidity sensor was connected with a miniature wireless communication component for human respiratory detection. The humidity sensor can clearly show the difference between normal and abnormal respiratory signals and this provided a new idea for the intelligent healthcare technology.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Laser Fabrication of Humidity Sensors on Ethanol-Soaked Polyimide for Fully Contactless Respiratory Monitoring

Rui Chen,Sirui Liu,Chen Zhang,Chongjie Jiang,Wei Zhou,Pengfeng Chen,Dezhi Wu,Dongxia Li,Jinhui Zhang,Tao Luo

DOI: https://doi.org/10.1021/acsami.4c07731

2024-08-28

Abstract:Humidity-sensor-based fully contactless respiratory monitoring can eliminate the discomfort and infection risks associated with any wearable device. However, challenges in the facile fabrication of highly sensitive humidity sensors continue to hinder their widespread application for fully contactless respiratory monitoring. In this study, we introduce a simple method to fabricate highly sensitive humidity sensors. Our method employs laser-induced graphene (LIG) on an ethanol-soaked polyimide (PI) film as the electrode of the humidity sensor. The ethanol-soaked PI between adjacent LIG electrodes functions as the sensing material, enabling ion-conductive humidity sensing. Compared to the LIG humidity sensors fabricated on untreated PI films, LIG humidity sensors fabricated on ethanol-soaked PI films exhibit superior performance with higher linearity (R2 = 0.9936), reduced hysteresis (ΔH = 5.1% RH), and increased sensitivity (0.65%/RH). Notably, the LIG humidity sensor fabricated on the ethanol-soaked PI film can detect a person's breathing from a distance of 30 cm, a capability not achieved by sensors fabricated on untreated PI films. Moreover, incorporating these LIG humidity sensors into an array further enhances both the detection distance and the sensitivity for respiratory monitoring. Experimental results demonstrate that the LIG humidity sensor array can be employed for fully contactless on-bed respiration monitoring and for continuous, fully contactless monitoring of the respiratory rate during treadmill exercise. These results highlight the great potential of our LIG humidity sensors for various practical applications in medicine and sports.
Rapid and Flexible Humidity Sensor Based on Laser-Induced Graphene for Monitoring Human Respiration

Changung Paeng,Arunkumar Shanmugasundaram,Gunwoo We,Taewook Kim,Jongsung Park,Dong-Weon Lee,Changyong Yim

DOI: https://doi.org/10.1021/acsanm.3c05283

IF: 6.14

2024-02-16

ACS Applied Nano Materials

Abstract:Respiration is an important physiological parameter used to assess human health and metabolic activity. Herein, we propose a laser-induced graphene (LIG)-based humidity sensor for respiratory monitoring. This sensor is fabricated through a combination of laser irradiation and intense pulsed light (IPL) sintering techniques. Initially, an ink containing copper nanoparticles (CuNPs) and graphene nanoplatelets (GnPs) is coated onto a polyimide (PI) substrate. The LIG is formed on the PI film using laser irradiation. To establish a reliable electrical connection between the LIG and the copper electrode, the ink undergoes rapid IPL sintering, resulting in an IPL-sintered copper electrode. This technique not only optimizes the fabrication process but also obviates the need for traditional approaches, such as copper wire bonding, electrode patterning, or the application of conductive paint on the LIG sensor. The humidity-sensing capabilities of the sensor are assessed under various relative humidity (RH) conditions. The sensor’s response escalates from roughly 15 to 92% as RH levels increase from 13 to 67%. The sensor showed minimal response to various potential interfering gases like ammonia, ethanol, carbon monoxide, sulfur dioxide, and nitrogen dioxide (with responses of 0.4, 1.87, 0.102, 0.12, and 0.29%, respectively), confirming its high selectivity for RH (91.2%). Additionally, the sensor demonstrates exemplary reproducibility, as evidenced by its consistent responses (approximately 47.65, 49.13, 48.65, 49.09, and 49.39) over five cycles at 40% RH. The LIG sensor is used to monitor a wide range of respiratory patterns, including normal, slow, fast, and apnea events. The sensor effectiveness is proven through the consistent detection of human breathing patterns over 30 min, demonstrating its stability and reliability for extended use in continuous respiratory monitoring. These findings highlight the significant potential of LIG sensors as advanced precision devices in clinical respiratory monitoring with potential integration into modern medical practices.

materials science, multidisciplinary,nanoscience & nanotechnology
All‐printed, Fast Response Flexible Humidity Sensor based on Hexagonal‐WO3 Nanowires for Multifunctional Applications

Panwang Guo,Bin Tian,Jing Liang,Xiuping Yang,Guilin Tang,Quancai Li,Qun Liu,Ke Zheng,Xiong Chen,Wei Wu

DOI: https://doi.org/10.1002/adma.202304420

IF: 29.4

2023-06-27

Advanced Materials

Abstract:The utilization of printing techniques for the development of high‐performance humidity sensors holds immense significance for various applications in the fields of Internet of Things, agriculture, human healthcare, and storage environments. However, the long response time and low sensitivity of current printed humidity sensors limited their practical applications. Herein, a series of high‐sensing performance flexible resistive‐type humidity sensors are fabricated by the screen‐printing method, and the hexagonal tungsten oxide (h‐WO3) is employed as the humidity sensing material due to its low cost, strong chemical adsorption ability, and excellent humidity sensing ability. The as‐prepared printed sensors exhibit high sensitivity, good repeatability, outstanding flexibility, low hysteresis, and fast response (1.5 s) in a wide relative humidity (RH) range (11‐95% RH). Furthermore, the sensitivity of humidity sensors can be easily adjusted by altering the manufacturing parameters of the sensing layer and interdigital electrode to meet the diverse requirements of specific applications. The printed flexible humidity sensors possess immense potential in various applications, including wearable devices, non‐contact measurements, and packaging opening state monitoring. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Humidity Sensor Composed of Laser-Induced Graphene Electrode and Graphene Oxide for Monitoring Respiration and Skin Moisture

Xianxiang Fei,Junyi Huang,Wenqing Shi

DOI: https://doi.org/10.3390/s23156784

IF: 3.9

2023-07-30

Sensors

Abstract:Respiratory rate and skin humidity are important physiological signals and have become an important basis for disease diagnosis, and they can be monitored by humidity sensors. However, it is difficult to employ high-quality humidity sensors on a broad scale due to their high cost and complex fabrication. Here, we propose a reliable, convenient, and efficient method to mass-produce humidity sensors. A capacitive humidity sensor is obtained by ablating a polyimide (PI) film with a picosecond laser to produce an interdigital electrode (IDE), followed by drop-casting graphene oxide (GO) as a moisture-sensitive material on the electrode. The sensor has long-time stability, a wide relative humidity (RH) detection range from 10% to 90%, and high sensitivity (3862 pF/%RH). In comparison to previous methods, the technology avoids the complex procedures and expensive costs of conventional interdigital electrode preparation. Furthermore, we discuss the effects of the electrode gap size and the amount of graphene oxide on humidity sensor performance, analyze the humidity sensing mechanism by impedance spectrum, and finally perform the monitoring of human respiratory rate and skin humidity change in a non-contact manner.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Single-sided and Integrated Polyaniline/ Poly(vinylidene Fluoride) Flexible Membrane with Micro/nanostructures As Breathable, Nontoxic and Fast Response Wearable Humidity Sensor.

Huijie Zhao,Zhao Wang,Yang Li,Mujie Yang

DOI: https://doi.org/10.1016/j.jcis.2021.08.214

IF: 9.9

2021-01-01

Journal of Colloid and Interface Science

Abstract:Harmless and breathable flexible humidity sensor has important applications in continuous and real-time detection of human physiological activities. In this work, with hydrophobic poly (vinylidene fluoride) (PVDF) membrane as both the template and substrate and cetyltrimethylammonium bromide as a structure regulator, polyaniline (PANI) was unilaterally deposited on a PVDF microporous membrane to facilely fabricate a single-sided integrated flexible humidity sensor (IFHS). Such IFHS is featured with unique micro/nano structure and good air permeability. Moreover, it exhibits good humidity sensing properties at room temperature including fast response, small hysteresis and stable response even under bending deformation. The flexible sensor could realize non-contact monitoring of human respiration and speaking activities. Unilateral deposition of PANI and good breathability of IFHS avoids direct contact between PANI and human skin, thus averting harms to human and minimizing the deterioration of humidity sensing properties of PANI layer. The simple method is universal to the preparation of single-sided, integrated, breathable, nontoxic and fast response wearable humidity sensors based on PANI and hydrophobic microporous polymer membranes, offering useful references for the construction of advanced flexible sensors.
An ultrafast-response and flexible humidity sensor for human respiration monitoring and noncontact safety warning

Xiaoyi Wang,Yang Deng,Xingru Chen,Peng Jiang,Yik Kin Cheung,Hongyu Yu

DOI: https://doi.org/10.1038/s41378-021-00324-4

2021-11-29

Abstract:Abstract The humidity sensor is an essential sensing node in medical diagnosis and industrial processing control. To date, most of the reported relative humidity sensors have a long response time of several seconds or even hundreds of seconds, which would limit their real application for certain critical areas with fast-varying signals. In this paper, we propose a flexible and low-cost humidity sensor using vertically aligned carbon nanotubes (VACNTs) as electrodes, a PDMS-Parylene C double layer as the flexible substrate, and graphene oxide as the sensing material. The humidity sensor has an ultrafast response of ~20 ms, which is more than two orders faster than most of the previously reported flexible humidity sensors. Moreover, the sensor has a high sensitivity (16.7 pF/% RH), low hysteresis (<0.44%), high repeatability (2.7%), good long-term stability, and outstanding flexibility. Benefiting from these advantages, especially the fast response, the device has been demonstrated in precise human respiration monitoring (fast breathing, normal breathing, deep breathing, asthma, choking, and apnea), noncontact electrical safety warning for bare hand and wet gloves, and noncontact pipe leakage detection. In addition, the facile fabrication of the flexible platform with the PDMS-Parylene C double layer can be easily integrated with multisensing functions such as pH sensing, ammonium ion sensing, and temperature sensing, all of which are useful for more pattern recognition of human activity.

nanoscience & nanotechnology,instruments & instrumentation
Facile Fabrication of Poly (diallyldimethyl Ammonium Chloride)/ti3c2tx/poly (vinylidene Fluoride) 3D Hollow Fiber Membrane Flexible Humidity Sensor and Its Application in the Monitoring of Health-Related Physiological Activity

Huijie Zhao,Huizhen Chen,Mujie Yang,Yang Li

DOI: https://doi.org/10.1016/j.snb.2022.132773

2023-01-01

Abstract:Flexible humidity sensors could be integrated with intelligent terminals, small medical devices, flexible electronic skin, etc. to monitor human physiological activity and safeguard the health. Herein, we report the facile preparation of flexible humidity sensors based on the composite of poly (diallyldimethyl ammonium chloride) (PDDA) and Ti(3)C(2)Tx loaded on the substrate of 3D hollow fiber membranes of poly (vinylidene fluoride) (PVDF) by pressure filtration and immersion deposition. The composite sensors of PDDA/Ti(3)C(2)Tx/PVDF showed high sensitivity (impedance change of three orders of magnitude between relative humidity (RH) of 10% and 90%), good sensing linearity (R-2 = 0.997), relatively small hysteresis (similar to 5% RH), outstanding selectivity, stable humidity response under deformation and good long-term stability. Moreover, they could recognize respiration status and identify movement of fingertip as slight as 1 mm, suggesting potentials in healthcare and human-machine interaction. The high performance of the composite sensor is attributed to large specific surface area and good conductivity of Ti(3)C(2)Tx, high sensitivity of PDDA, and abundant microporous and hollow channels in PVDF fiber membrane for efficient transport of moisture. The work offers new approaches for preparing advanced flexible sensors with promising prospects in wearable electronics.
Inkjet-Printed Flexible, Sensitive Humidity Sensor with High Breathability on Electrospun Nanofibrous Mats

Yu Liu,Lei Xing,Hongze Zhu,Guangya Liu,Junyi Ren,Bin Sun

DOI: https://doi.org/10.1007/s12221-024-00552-1

IF: 2.5

2024-04-13

Fibers and Polymers

Abstract:Inkjet printing technology has been playing an increasingly important role in manufacturing of electronic devices due to its low cost, high deposition accuracy, and mass manufacturability. Inkjet-printed flexible sensors are increasingly used in the field of flexible/wearable electronics. In this study, a kneadable humidity sensor with high breathability was developed on electrospun thermoplastic polyurethane (TPU) nanofibrous mats using inkjet printing technology. This humidity sensor shows good sensitivity over a wide humidity range, with a resistance change of only 6.13% after 1000 mechanical bends at 75% relative humidity (RH). It also has good reversibility, and the morphology and structure are not damaged upon direct contact with water droplets. In addition, the humidity sensor with good air permeability (28.8 mm s −1 ) can be used for breath monitoring, particularly for person in sadness, panic, and tensed situations.

materials science, textiles,polymer science
Wearable humidity sensor based on porous graphene network for respiration monitoring.

Yu Pang,Jinming Jian,Tao Tu,Zhen Yang,Jiang Ling,Yuxing Li,Xuefeng Wang,Yancong Qiao,He Tian,Yi Yang,Tian-Ling Ren

DOI: https://doi.org/10.1016/j.bios.2018.05.038

IF: 12.545

2018-01-01

Biosensors and Bioelectronics

Abstract:Respiration is as one of the most essential physiological signals, which can be used to monitor human healthcare and activities. Herein, we report a flexible, lightweight and highly conductive porous graphene network as the humidity sensor for respiration monitoring. To enhance the sensing performance, the graphene oxide (GO), poly (3, 4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT: PSS) and Ag colloids (AC) were used to modify the porous graphene. The humidity properties of porous based graphene networks have been investigated at different relative humidity (RH). The porous based graphene sensors exhibit excellent capability of monitoring different breathing patterns including mouse and nose respiration, normal and deep respiration. Besides, the signal variations before and after water intake was recorded by the sensor, which demonstrates the ability to monitor water loss during breathing period. Furthermore, the humidity sensor shows the ability to detect physiological activities including skin moisture, speaking and whistle rhythm, which could be a promising electronic for clinical respiration monitoring.
Wireless Humidity Sensor for Smart Packaging via One‐step Laser‐Induced Patterning and Nanoparticle Formation on Metallized Paper

Sarath Gopalakrishnan,Sotoudeh Sedaghat,Akshay Krishnakumar,Zihao He,Haiyan Wang,Rahim Rahimi

DOI: https://doi.org/10.1002/aelm.202101149

IF: 6.2

2022-02-03

Advanced Electronic Materials

Abstract:In this work, a scalable and rapid process is developed for creating a low-cost humidity sensor for wireless monitoring of moisture levels within packaged goods. The sensor comprises a moisture-sensitive interdigitated capacitor connected to a planar spiral coil, forming an LC circuit whose resonant frequency is a function of environmental humidity. The sensor is fabricated on a commercially available metallized parchment paper through selective laser ablation of the laminated aluminum (Al) film on the parchment paper substrate. The laser ablation process provides a unique one-step patterning of the conductive Al layer on the paper while simultaneously creating high surface area Al2O3 nanoparticles within the laser-ablated regions. The intrinsic humidity-responsive characteristics of the laser-induced Al2O3 nanostructures provide the wireless sensor with a tenfold higher sensitivity to humidity than a similar LC resonant sensor prepared by conventional photolithography-based processes on FR-4 substrates. The frequency change of the sensor is observed to be a linear function within the range of 0−85% RH, providing an average sensitivity of −87 kHz RH−1 with good repeatability and stable performance. Furthermore, the employment of scalable laser fabrication processes using commercially available inexpensive materials renders these technologies viable for roll-to-roll manufacturing of low-cost wireless sensors for smart packaging applications.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
High-performance Flexible Humidity Sensor Based on B-TiO2/ SnS2 Nanoflowers for Non-Contact Sensing and Respiration Detection

Jingzhe Zhang,Honglie Shen,Yufang Li,Xiang Li,Jiaxin Sun,Di Yan,Xinghan Jin,Xuanhao Wu

DOI: https://doi.org/10.1016/j.surfin.2024.105136

IF: 6.2

2024-01-01

Surfaces and Interfaces

Abstract:The development of flexible humidity sensors is essential for the advancement of wearable devices and electronic skin. However, the process of preparing these sensors is typically complex, and they often suffer from poor stability and a limited sensing range, which fails to meet the requirements for practical applications. Here, we prepared SnS2 with nanoflower morphology by hydrothermal method, and successfully prepared a high-performance flexible humidity sensor with a high response range (20-95%) by compositing it with B-TiO2 nanoparticles with oxygen defects after sodium borohydride reduction and coating it on a PET flexible substrate. This sensor demonstrates an exceptional response (753.2 at 90% RH) in high humidity environments and exhibits rapid response (13 s) and recovery times (19 s). Moreover, the sensor accurately detects human breathing patterns and frequencies, making it suitable for non-contact sensing applications. This research offers valuable insights into the simplified preparation and advancement of flexible humidity sensors.
Facile Fabrication of Laser-Scribed-graphene Humidity Sensors by a Commercial DVD Drive

Xin Li,Wendou Feng,Xiangxin Zhang,Songyue Lin,Yuanqiang Chen,Chen Chengwei,Sujing Chen,Wei Wang,Yining Zhang

DOI: https://doi.org/10.1016/j.snb.2020.128483

2020-01-01

Abstract:Monitoring the environmental humidity are of great significance to human comfort and product quality in many fields. However, high performance humidity sensors are difficult to be widely used because of their cost and complex preparation process. It is also highly desirable to develop a facile fabrication method that is capable of producing humidity sensors of customized size, shape, and geometry. Here, using a low power DVD drive, we successfully fabricate a highly sensitivity and low-cost humidity sensor, consisting of laser-scribed graphene (LSG) electrode and graphite oxide (GO) sensing layer. The LSG-GO humidity sensor operates in the relative humidity (RH) range of 19 %-97.4 %, demonstrating high sensitivity (4770.14 pF/% RH), quick response/ recovery, and excellent sensing stability. In addition, the possible humidity sensing mechanism is discussed with the help of impedance spectroscopy. These results indicate that the LSG/GO sensor, enabled by the facile fabrication process with low power DVD drives, demonstrates promising potential with broad application prospects.
Rhombus-patterned flexible self-supported PVDF-based humidity sensor for respiratory monitoring

Shouzhi Yan,Dongdong Shen,Binjie Xin,Yu Wu,Md All Amin Newton

DOI: https://doi.org/10.1016/j.polymer.2023.126139

IF: 4.6

2023-06-29

Polymer

Abstract:Humidity sensors are crucial in sectors such as environmental sustainability, industrial production, and healthcare. The fabrication of sandwich-type humidity sensors that can serve as substrates, sensing materials, and electrodes remains a focus of effort in the healthcare sector now. This research entails the synthesis of rhombus-patterned flexible nanofiber membranes (PPZN) utilizing polyvinylidene fluoride (PVDF) and zinc oxide nanoparticles (ZnO NPs) as the foundational substrates, while employing polyvinylpyrrolidone (PVP) as a structural modulator and hydrophilic modifier. The fabrication process involved the utilization of electrospinning technique for membrane production. Furthermore, polyaniline (PANI) is in-situ polymerized onto rhombus-patterned nanofiber membrane to form a core-sheath structure (PPZN), which serves as an electrode to produce a rhombus-patterned flexible self-supported PVDF-based humidity sensor (YPPZN). The combination of hydrophilic and hydrophobic properties facilitates the transfer of water molecules. At the same time, the unique diamond structure and high surface area provide favorable channels for the transportation of water molecules. YPPZN offers a broad range of relative humidity for operation (13%–93% RH), excellent sensitivity, and quick response and recovery times (20s/75s). The YPPZN humidity sensor likewise provides excellent flexibility and dependability, which can be configured into an arch inside a mask for ongoing real-time monitoring of human respiratory parameters.

polymer science
Non-contact porous composite fiber paper-based humidity sensor for wearable breathing and skin humidity monitoring

Xueye Chen,Aoxun Liang

DOI: https://doi.org/10.2139/ssrn.4938313

IF: 11.9

2024-09-26

Journal of Materials Chemistry A

Abstract:Flexible sensors capable of continuously monitoring surface moisture and respiratory status play a crucial role in human health monitoring. However, manufacturing flexible humidity sensors at low cost remains challenging in traditional manufacturing industries. This study introduces a humidity sensor prepared by impregnating paper with LiCl solution and using carbon nanotube-carboxymethyl cellulose composite paper-based fibers to fabricate interdigital electrodes. This sensor exhibits high sensitivity to gas humidity due to its flexible and porous electrode structure and moisture-sensitive substrate. The prepared Porous fiber paper-based humidity sensor(PLFC) is used for detecting small amounts of gas humidity ranging from 33%RH to 98%RH, with a response time of only 500 ms and a linearity of R2=0.960. In terms of human health monitoring, it can continuously monitor respiratory rate and amplitude and non-contactly perceive the humidity status of body parts. By reflecting the tester's physiological condition based on surface humidity, it is highly beneficial for patient recovery care and health preservation. Therefore, the design and ideas proposed in this work are of significant importance for the future development and application of wearable respiratory sensors and moisture sensors.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Micro‐3D Printed Conductive Polymer Composite via Two‐Photon Polymerization for Sensing Applications

C. Amruth,Anuj Kumar Singh,Anirudh Sharma,Daniel Corzo,Derya Baran

DOI: https://doi.org/10.1002/admt.202400290

IF: 6.8

2024-06-06

Advanced Materials Technologies

Abstract:This work present a 2PP printable novel conductive polymeric composite design which is both conductive and responsive to external parameter such as humidity. Exploiting the unique properties of the materials and 3D design, they fabricate and demonstrate a highly responsive breathing sensor. This method introduces a promising approach in designing polymer‐based multifunctional device. Two‐photon Polymerization (2PP) process for high‐resolution 3D printing presents an opportunity to design micro‐scale structures with a high surface‐to‐volume ratio for highly responsive devices. However, these acrylate or thiol‐based resins are electrically insulating and non‐functional in nature, therefore limiting their widespread application in biosensing and biotechnology. Here, a novel conductive polymeric composite resin to print conductive 3D micro‐structures via the 2PP technique is developed and its application in sensing are demonstrated. The composite consists of acrylate‐based 2PP resin and Poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate) (PEDOT:PSS), a conductive and biocompatible organic semiconductor The PEDOT:PSS incorporation in resin through Raman and X‐ray photoelectron spectroscopy (XPS) is studied. An electrical conductivity of 3.5 × 102 S cm−1 in a 20 μm long and 10 μm high 3D printed micro‐structure which is suitable for electronic applications is achieved. An ultra‐fast micro‐3D printed humidity sensor with a response and recovery time of 0.15 and 0.3 s respectively is demonstrated. The printed sensors show high sensitivity in humidity levels of 0–80%RH. As a proof of concept, the real‐time respiration of a human body is recorded, implying a potential application in health monitoring systems.

materials science, multidisciplinary

Fast-response humidity sensor based on laser printing for respiration monitoring

Fast-Response Non-Contact Flexible Humidity Sensor Based on Direct-Writing Printing for Respiration Monitoring

A novel SAW humidity sensor based on electrosprayed polymerized electrolyte film

Laser Direct Writing of Ga 2 O 3 /liquid Metal-Based Flexible Humidity Sensors

Facile and Cost-Effective Fabrication of Highly Sensitive, Fast-Response Flexible Humidity Sensors Enabled by Laser-Induced Graphene

Fast response, gas-permeable flexible humidity sensor based on PEDOT:PSS-GO for respiration monitoring

Laser Fabrication of Humidity Sensors on Ethanol-Soaked Polyimide for Fully Contactless Respiratory Monitoring

Rapid and Flexible Humidity Sensor Based on Laser-Induced Graphene for Monitoring Human Respiration

All‐printed, Fast Response Flexible Humidity Sensor based on Hexagonal‐WO3 Nanowires for Multifunctional Applications

Humidity Sensor Composed of Laser-Induced Graphene Electrode and Graphene Oxide for Monitoring Respiration and Skin Moisture

Single-sided and Integrated Polyaniline/ Poly(vinylidene Fluoride) Flexible Membrane with Micro/nanostructures As Breathable, Nontoxic and Fast Response Wearable Humidity Sensor.

An ultrafast-response and flexible humidity sensor for human respiration monitoring and noncontact safety warning

Facile Fabrication of Poly (diallyldimethyl Ammonium Chloride)/ti3c2tx/poly (vinylidene Fluoride) 3D Hollow Fiber Membrane Flexible Humidity Sensor and Its Application in the Monitoring of Health-Related Physiological Activity

Inkjet-Printed Flexible, Sensitive Humidity Sensor with High Breathability on Electrospun Nanofibrous Mats

Wearable humidity sensor based on porous graphene network for respiration monitoring.

Wireless Humidity Sensor for Smart Packaging via One‐step Laser‐Induced Patterning and Nanoparticle Formation on Metallized Paper

High-performance Flexible Humidity Sensor Based on B-TiO2/ SnS2 Nanoflowers for Non-Contact Sensing and Respiration Detection

Facile Fabrication of Laser-Scribed-graphene Humidity Sensors by a Commercial DVD Drive

Rhombus-patterned flexible self-supported PVDF-based humidity sensor for respiratory monitoring

Non-contact porous composite fiber paper-based humidity sensor for wearable breathing and skin humidity monitoring

Micro‐3D Printed Conductive Polymer Composite via Two‐Photon Polymerization for Sensing Applications