Abstract:Monotonic circuits are a class of input–output mode (IOM) asynchronous circuits that are relaxed compared to quasi-delay-insensitive (QDI) IOM asynchronous circuits in terms of signaling the completion of internal processing. Some recent works have demonstrated the superiority of monotonic logic over QDI logic for arithmetic circuits such as adders and multipliers. This paper presents a new monotonic asynchronous two-bit full adder (TFA) that can be duplicated and cascaded to form a ripple-carry adder (RCA). While an RCA is a slow adder with respect to synchronous design, with respect to IOM asynchronous design an RCA is a noteworthy adder since it has perhaps the least reverse latency that is not attainable through other IOM asynchronous adders. Conventionally, an RCA is constructed via a cascade of one-bit full adders (OFAs). An OFA adds two input bits along with any carry input and produces a sum bit and any carry output. On the other hand, a TFA simultaneously adds two pairs of input bits along with any carry input and produces two sum bits and any carry output. Using our proposed monotonic TFA, we realized an RCA to compare its performance with RCAs constructed using different asynchronous OFAs, and RCAs constructed using existing TFAs. We considered the popular delay-insensitive dual-rail scheme for encoding the adder inputs and outputs, and two 4-phase handshake protocols, namely return-to-zero handshaking (R0H) and return-to-one handshaking (R1H) for communication separately. We used a 28 nm CMOS process for implementation and considered a 32-bit addition as an example. Based on the design metrics estimated, the following inferences were derived: (i) compared to the RCA using the state-of-the-art monotonic OFA, the RCA incorporating the proposed TFA achieved a 26% reduction in cycle time for R0H and a 28.5% reduction in cycle time for R1H while dissipating almost the same power; the cycle time governs the data application rate in an IOM asynchronous circuit, and (ii) compared to the RCA comprising an early output QDI TFA, the RCA incorporating the proposed TFA achieved a 22.3% reduction in cycle time for R0H and a 25.4% reduction in cycle time for R1H while dissipating moderately less power. Also, compared to the existing early output QDI TFA, the proposed TFA occupies 40.9% less area for R0H and 42% less area for R1H.

Sense Amplifier Half Buffer Based Ripple Carry Adder for IEEE 754 Standards

Performance Analysis of High Speed and Low Power Binary Adders

Sense Amplifier Half-Buffer (SAHB) A Low-Power High-Performance Asynchronous Logic QDI Cell Template.

Design of Delay Efficient Hybrid Adder for High Speed Applications

Design of High-Speed Area-Efficient VLSI Architecture of 32-Bit Three-Operand Binary Adder

Asynchronous Early Output Dual-Bit Full Adders Based on Homogeneous and Heterogeneous Delay-Insensitive Data Encoding

A 32-Bit Ripple-Ling Hybrid Carry Adder

Design on Multi-Bit Adder Using Sense Amplifier-Based Pass Transistor Logic for Near-Threshold Voltage Operation.

Efficient quantum-dot adder optimisation and analysis for future circuits

Area/latency optimized early output asynchronous full adders and relative-timed ripple carry adders

Design of Low Power 64-Bit Hybrid Full Adder

Speed and Energy Optimised Quasi-Delay-Insensitive Block Carry Lookahead Adder

4-bit Carry Look Ahead Adder Using MGDI Technique

VLSI implementation of Kogge-Stone Adder for low-power applications

A novel design of coplanar 8-bit ripple carry adder using field-coupled quantum-dot cellular automata nanotechnology

A novel reversible gate and optimised implementation of half adder, subtractor and 2-bit multiplier

Monotonic Asynchronous Two-Bit Full Adder

A delay efficient hybrid parallel prefix variable latency CSKA based multi-operand adder with optimized 5:2 compressor and skip logic

Design of multi-stage latency adders using detection and sequence-dependence between successive calculations

Design and Performance Analysis of hybrid adders for high speed arithmetic circuit

Cost Efficient Design of Reversible Adder Circuits for Low Power Applications