Abstract:In the actual monitoring of deep hole displacement, the identification of slip surfaces is primarily based on abrupt changes observed in the inclinometric curve. In conventional identification methods, inclinometric curves exhibiting indications of sliding can be categorized into three types: B-type, D-type, and r-type. The position of the slip surface is typically determined by identifying the depth corresponding to the point of maximum displacement mutation. However, this method is sensitive to the interval of measurement points and the observation scale of the coordinate axes and suffers from unclear sliding surfaces and uncertain values. Based on the variation characteristics of these diagonal curves, we classified the landslide into three components: the sliding body, the sliding interval, and the immobile body. Moreover, three different generalization models were established to analyze the relationships between the curve form and the slip surface location based on different physical indicators such as displacement rate, relative displacement, and acceleration. The results show that the displacement rate curves of an r-type slope exhibit a clustering feature in the sliding interval, and by solving for the depth of discrete points within the step phase, it is possible to determine the location of the slip surface. On the other hand, D-type slopes have inflection points in the relative displacement curve located at the slip surface. The acceleration curves of B-type slopes exhibit clustering characteristics during the sliding interval, while the scattered acceleration data demonstrate wandering characteristics. Consequently, the slip surface location can be revealed by solving the depth corresponding to the maximum acceleration with cubic spline interpolation. The approach proposed in this paper was applied to the monitoring data of a landslide in Yunnan Province, China. The results indicate that our approach can accurately identify the slip surface location and enable computability of its position, thereby enhancing applicability and reliability of the deep-hole displacement monitoring data.

Searching for Slip Surface of Disturbed Slope Based on Logistic Function

Generating Slip Surfaces Using the Logistic Function Integral

Mathematical functions for generating slip surfaces of slopes

Slope Stability Analysis Using Slice-Wise Factor of Safety

A Robust and Efficient Method of Designing Piles for Landslide Stabilization

Analytical calculation of the critical inclination of rock slopes with a planar failure surface under water pressure

Slope Stability Analysis and Sliding Surface Search Model Based on Swedish Slice Method

Model of Combined Slips in Slope Stability Analysis

Method for determining the position of landslide slip-surface with a typical inclinometric curves

An Efficient Approach for Locating the Critical Slip Surface in Slope Stability Analyses Using a Real-Coded Genetic Algorithm

Extended Algorithm Using Monte Carlo Techniques for Searching General Critical Slip Surface in Slope Stability Analysis

A Displacement-Based Method for Evaluating the Stability of a Pile-Stabilized Slope

Sustainable Slope Stability Analysis: A Critical Study on Methods

Searching slope critical slip surface based on the NMM and equivalent plastic strain

A new method for searching all possible circular slips of a slope

Genetic Algorithm for Searching Forcritical Slip Surface in Soil Slopesbased on Stress Fields

Reliability analysis of progressive failure of strain softening slope

Reliability analysis and geometric optimization method of cut slope in spatially variable soils with rotated anisotropy

Stability Analysis of a Layered Slope with Failure Mechanism of a Composite Slip Surface

Simplified Method for Analyzing Soil Slope Deformation under Cyclic Loading

Stability Calculation of Slope by a Tabu Search Method