Abstract:Abstract Microstructure control in the laser powder bed fusion additive manufacturing processes is a topic of major interest because of the submillimeter length scale at which the manufacturing process occurs. The ability to control the process at the melt pool scale allows for microstructure control that few other manufacturing techniques can match. The majority of work on microstructure control has focused on altering laser parameters to control solidification conditions (Ref (R.R. Dehoff, M.M. Kirka, W.J. Sames, H. Bilheux, A.S. Tremsin, L.E. Lowe, and S.S. Babu, Site Specific Control of Crystallographic Grain Orientation through Electron Beam Additive Manufacturing, Mater. Sci. Technol., 2014, 31 (8), p 931–938. R. Shi, S.A. Khairallah, T.T. Roehling, T.W. Heo, J.T. McKeown, and M.J. Matthews, Microstructural Control in Metal Laser Powder Bed Fusion Additive Manufacturing Using Laser Beam Shaping Strategy, Acta Mater., 2020, 184 , p 284–305, https://doi.org/10.1016/j.actamat.2019.11.053 .)). Other machine parameters, besides the laser parameters, have also been shown to affect the microstructure of AM parts (Ref (N. Nadammal, S. Cabeza, T. Mishurova, T. Thiede, A. Kromm, C. Seyfert, L. Farahbod, C. Haberland, J.A. Schneider, P.D. Portella, and G. Bruno, Effect of Hatch Length on the Development of Microstructure, Texture and Residual Stresses in Selective Laser Melted Superalloy Inconel 718, Mater. Des., 2017, 134 , p 139–150, https://doi.org/10.1016/j.matdes.2017.08.049 . F. Geiger, K. Kunze, and T. Etter, Tailoring the Texture of IN738LC Processed by Selective Laser Melting (SLM) by Specific Scanning Strategies, Mater. Sci. Eng. A, 2016, 661 , p 240–246, https://doi.org/10.1016/j.msea.2016.03.036 .)). We propose an investigation of the effects of hatch spacing and layer thickness on microstructure development in laser powder bed fusion additive manufacturing. A Monte Carlo Potts model with textured solidification capabilities is used to study the effects of these parameters on a unidirectional scan strategy. The simulation results reveal substantial changes in grain morphology as well as texture. Additionally, EVP-FFT crystal plasticity simulations were performed to evaluate the effect of the microstructural shifts on mechanical response. The conclusions from this work elucidate the effects of these parameters on part microstructure as predicted by the texture-aware solidification Potts model and inform understanding of how bulk texture is predicted by the simulation approach.

The Average Grain Size and Grain Aspect Ratio in Metal Laser Powder Bed Fusion: Modeling and Experiment

Grain structure and texture selection regimes in metal powder bed fusion

Prediction of microstructure in laser powder bed fusion process

3D Modeling of the Solidification Structure Evolution and of the Inter Layer/Track Voids Formation in Metallic Alloys Processed by Powder Bed Fusion Additive Manufacturing

The interplay of local chemistry and plasticity in controlling microstructure formation during laser powder bed fusion of metals

Fast-throughput simulations of laser-based additive manufacturing in metals to study the influence of processing parameters on mechanical properties

Simulation Study of Hatch Spacing and Layer Thickness Effects on Microstructure in Laser Powder Bed Fusion Additive Manufacturing using a Texture-Aware Solidification Potts Model

Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy

Predicting and correlating melt pool characteristics with processing parameters in IN625 powder bed fusion additive manufacturing

Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy

Part geometry and conduction-based laser power control for powder bed fusion additive manufacturing

Effect of molten pool flow and recoil pressure on grain growth structures during laser powder bed fusion by an integrated model

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Laser Powder Bed Fusion Parameter Selection via Machine-Learning-Augmented Process Modeling

Laser Powder Bed Fusion: A State-of-the-Art Review of the Technology, Materials, Properties & Defects, and Numerical Modelling

Quantification of Interdependent Dynamics during Laser Additive Manufacturing Using X‐Ray Imaging Informed Multi‐Physics and Multiphase Simulation

Concurrent modeling of porosity and microstructure in multilayer three-dimensional simulations of powder-bed fusion additive manufacturing of INCONEL 718

Influence of spattering on in-process layer surface roughness during laser powder bed fusion

A Lagrangian meshfree mesoscale simulation of powder bed fusion additive manufacturing of metals

Additive manufacturing: Application and validation of machine learning-based process-structure-property linkages in Ti-6Al-4V