Abstract:Purpose: A project to construct a new treatment facility, as an extension of the existing HIMAC facility, has been initiated for the further development of carbon-ion therapy at NIRS. This new treatment facility is equipped with a 3D irradiation system with pencil-beam scanning. The challenge of this project is to realize treatment of a moving target by scanning irradiation. To achieve fast rescanning within an acceptable irradiation time, the authors developed a fast scanning system. Methods: In order to verify the validity of the design and to demonstrate the performance of the fast scanning prior to use in the new treatment facility, a new scanning-irradiation system was developed and installed into the existing HIMAC physics-experiment course. The authors made strong efforts to develop (1) the fast scanning magnet and its power supply, (2) the high-speed control system, and (3) the beam monitoring. The performance of the system including 3D dose conformation was tested by using the carbon beam from the HIMAC accelerator. Results: The performance of the fast scanning system was verified by beam tests. Precision of the scanned beam position was less than +/-0.5 mm. By cooperating with the planning software, the authors verified the homogeneity of the delivered field within +/-3% for the 3D delivery. This system took only 20 s to deliver the physical dose of 1 Gy to a spherical target having a diameter of 60 mm with eight rescans. In this test, the average of the spot-staying time was considerably reduced to 154 micros, while the minimum staying time was 30 micros. Conclusions: As a result of this study, the authors verified that the new scanning delivery system can produce an accurate 3D dose distribution for the target volume in combination with the planning software.

Newly constructed compact accelerator-based neutron facility at AIST

Development of Compact Proton Accelerator Driven Neutron Sources

FOR A PHOTO-NEUTRON SOURCE DRIVEN BY 15 MeV ELECTRON LINAC

Commissioning of a compact multibend achromat lattice: A new 3 GeV synchrotron radiation facility

Materials and Life Science Experimental Facility (MLF) at the Japan Proton Accelerator Research Complex II: Neutron Scattering Instruments

JASMIN: Japanese-American study of muon interactions and neutron detection

The Compact Pulsed Hadron Source: A Design Perspective

Concept of Staged Approach for International Fusion Materials Irradiation Facility

Materials and Life Science Experimental Facility at the Japan Proton Accelerator Research Complex III: Neutron Devices and Computational and Sample Environments

A Prototype Compact Accelerator Driven Neutron Source for Canada Supporting Medical and Scientific Applications

Materials and Life Science Experimental Facility at the Japan Proton Accelerator Research Complex I: Pulsed Spallation Neutron Source

Enabling a Multi-Purpose High-Energy Neutron Source Based on High-Current Compact Cyclotrons

Measurement of 107-MeV proton-induced double-differential thick target neutron yields for Fe, Pb, and Bi using a fixed-field alternating gradient accelerator at Kyoto University

Studies of High Density Baryon Matter with High Intensity Heavy-Ion Beams at J-PARC

Fabrication and RF test of the 500 MHz-RFQ linear accelerator for a transportable neutron source RANS-III

Performance of the NIRS fast scanning system for heavy-ion radiotherapy

Development of a Neutron Generating Target for Compact Neutron Sources Using Low Energy Proton Beams

Technological developments and accelerator improvements for the FRIB beam power ramp-up

The new RIB project at RIKEN

Future Accelerator-Based Neutrino Beams

The Advanced Superconducting Test Accelerator (ASTA) at Fermilab: A User-Driven Facility Dedicated to Accelerator Science \& Technology