Abstract:This work provides a comprehensive techno-economic assessment of high-temperature direct air capture (HTDAC) integrated with Fischer–Tropsch synthesis (FTS) for producing renewable jet fuel on a scale of approximately 25 t/h. Specifically, the HTDAC is based on calcium looping employing calcination in a hydrogen-based atmosphere to enable simultaneous RWGS reaction. A detailed description of the Aspen Plus model for HTDAC, alkaline and solid oxide electrolysis systems, RWGS reactor and the FTS is provided for future reference. Five system configurations are analysed, comparing the energy efficiency effects of hydrogen oxy-fuel combustion and electric calcination in a hydrogen-based atmosphere. In this regard, the potential omission of the RWGS reactor is examined, considering that 62 to 78 % of the CO2 is already converted into CO in the calciner, with the highest conversion rates achieved through electric calcination. Moreover, the study investigates the impact of alkaline electrolysis and solid oxide electrolysis on the system's energy efficiency. Overall carbon efficiencies of more than 50 % in the jet fuel are achieved, with system energy efficiencies ranging from 30.6 to 39.0 % corresponding to fuel-specific energy consumption in the range of 122 to 156 MJ/kgJet fuel . Net present value (NPV) analysis reveals a projected minimum fuel selling price (MFSP) in the range of 4.45 to 6.32 €/L, which is significantly higher than previous literature estimates based on more optimistic cost assumptions. Uncertainties in cost parameters are addressed through a Monte Carlo analysis which shows the potential of a significant decrease in the MFSP provided that some of the cost estimates will be cheaper than the conservative initial estimate. Conclusively, this study highlights the significance of developing a financially feasible electrically heated calciner that can effectively handle high-temperature hydrogen. Furthermore, maximising the yield of jet fuel emerges as a critical factor for unlocking the future potential of the process, as it substantially reduces the cost of fuel production. Lastly, the reduction of hydrogen production costs is identified as the most crucial aspect in enhancing the economic viability of the process, as it serves as the biggest contributor to the high minimum fuel selling price.

Comprehensive environmental impact assessment of a combined petroleum coke and natural gas to Fischer-Tropsch diesel process

Life Cycle Analysis of Fischer-Tropsch Diesel Produced by Tri-Reforming and Fischer-Tropsch Synthesis (TriFTS) of Landfill Gas

Evaluation of Ultra Clean Fuels from Natural Gas

Developing efficient gasification technology for high-sulfur petroleum coke to hydrogen-rich syngas production

Integrated CO 2 capture and conversion into methanol units: Assessing techno-economic and environmental aspects compared to CO 2 into SNG alternative

Advancements and challenges in the production of low-carbon fuels via catalytic fast pyrolysis of biomass through refinery integration and co-product generation

Energy consumption and CO2 emissions of petroleum coke-to-methanol with/without carbon capture using process modeling and life cycle analysis

Concept design, technical performance, and GHG emissions analysis of petroleum coke direct chemical looping hydrogen highly integrated with gasification for methanol production process

Life cycle energy use and GHG emissions assessment for DME from coal

Techno-economic analysis of CO2/steam co-electrolysis process and synfuel production process coupled with steel manufacturing process

Life Cycle Assessment of Post-Combustion CO2 Capture and Recovery by Hydrophobic Polypropylene Cross-Flow Hollow Fiber Membrane Contactors with Activated Methyldiethanolamine

Conceptual Design Development of Coal-to-Methanol Process with Carbon Capture and Utilization

Comparative Life Cycle Assessment of Co-Processing of Bio-Oil and Vacuum Gas Oil in an Existing Refinery

Effect of Operating Conditions on the Gasification of Pet-Coke Water Slurry in an Entrained-Flow Gasifier Simulation

Consequential life cycle assessment of carbon capture and utilization technologies within the chemical industry

Life Cycle Environmental Impacts Assessment of Post-Combustion Carbon Capture for Natural Gas Combined Cycle Power Plant in Iraq, Considering Grassroots and Retrofit Design

Techno-economic study of integrated high-temperature direct air capture with hydrogen-based calcination and Fischer–Tropsch synthesis for jet fuel production

Efficient Way of Carbon Dioxide Utilization in a Gas-to-Methanol Process: From Fundamental Research to Industrial Demonstration

Energy Use, Greenhouse Gases Emission and Cost Effectiveness of an Integrated High– and Low–temperature Fisher–Tropsch Synthesis Plant from a Lifecycle Viewpoint

Opportunities for utilizing waste cooking oil in crude to petrochemical process: Novel process design, optimal strategy, techno-economic analysis and life cycle society-environment assessment

System integration and evaluation of residual oil deep catalytic cracking process coupled with CO 2 recycle to produce polypropyl carbonate