Machine-knitted washable sensor array textile for precise epidermal physiological signal monitoring

Wenjing Fan,Qiang He,Keyu Meng,Xulong Tan,Zhihao Zhou,Gaoqiang Zhang,Jin Yang,Zhong Lin Wang

DOI: https://doi.org/10.1126/sciadv.aay2840

IF: 13.6

2020-03-13

Science Advances

Abstract:A triboelectric all-textile sensor with high pressure sensitivity and comfort was been developed for health monitoring.

multidisciplinary sciences

What problem does this paper attempt to address?

Battery‐Free and Wireless Epidermal Electrochemical System with All‐Printed Stretchable Electrode Array for Multiplexed in Situ Sweat Analysis

Gang Xu,Chen Cheng,Zhaoyang Liu,Wei Yuan,Xinzhou Wu,Yanli Lu,Sze Shin Low,Jinglong Liu,Lihang Zhu,Daizong Ji,Shuang Li,Zetao Chen,Lisha Wang,Qinggang Yang,Zheng Cui,Qingjun Liu

DOI: https://doi.org/10.1002/admt.201800658

IF: 6.8

2019-01-01

Advanced Materials Technologies

Abstract:Skin-interfaced electrochemical sensing devices are widely developed for biochemical sensing at molecular levels. However, the sensing electrodes fabricated with photolithography or printing technique are hard to achieve high stretchability without special designs like serpentine shape. Also, most of them require wired connections with external electrochemical workstations for data acquisition or on-board batteries to power the circuits, which largely restrain the flexibility, simplification, and miniaturization of the devices. Here, a battery-free, wireless, and epidermal electrochemical system is presented for in situ biochemical sensing. The sensing component of the system is a stretchable electrode array all-printed with soft polymer and conductive silver nanowires. The electrodes show stable electrical properties within strain range of 0-50%, without serpentine designs. The electronic component of the system is a fully integrated flexible circuit board with near field communication module, which enables wireless energy harvesting and data transmission with smartphones. The system demonstrates good performance in real-time on-body sweat analysis for simultaneous quantitative detections of glucose, hydrogen, sodium, and potassium. This battery-free and wireless epidermal electrochemical system provides a simplified, miniaturized, and flexible solution for a wide range of biochemical platforms, including wearable and implanted bioelectronics.
Wearable 3-D Meshed Textile Pressure Sensor for Physiological Signal Monitoring

Zhihao Zhou,Wei Tan,Jun Cai,Yujiang Wu,Ping-an Yang,Xin Huang,Wenjing Fan,Litao Bai,Rui Li,Ping-An Yang

DOI: https://doi.org/10.1109/jsen.2023.3349279

IF: 4.3

2024-03-15

IEEE Sensors Journal

Abstract:Wearable electrical textiles are of great value for future personalized healthcare applications. Herein, we report a 3-D meshed textile pressure sensor, using a facile dip coating strategy, that combing the sensitive 2-D Ti3C2Tx MXene nanolayer with woven textile fibers. Based on the sensitive 3-D cross-connected conductive network, the textile sensor achieves simultaneously a high sensitivity of up to 81.9 kPa−1 and a fast response time of 30 ms in a wide pressure detection range (0–19 kPa) as well as prominent durability of more than 5000 cycles. Benefiting from superior performances, the textile sensor can be applied for real-time human physiological signals monitoring from pulse waves to human joint motion. This work represents a solid step toward personalized healthcare and clinical diagnosis.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
Machine-washable and breathable pressure sensors based on triboelectric nanogenerators enabled by textile technologies

Zhizhen Zhao,Qiyao Huang,Casey Yan,Youdi Liu,Xiangwen Zeng,Xiaoding Wei,Youfan Hu,Zijian Zheng

DOI: https://doi.org/10.1016/j.nanoen.2020.104528

IF: 17.6

2020-01-01

Nano Energy

Abstract:Utilization of textile's triboelectric effect to realize the perception of pressure is of great interest for self-powered wearable electronics that integrate seamlessly with smart fabrics. However, the challenges associated with rational material/device designs based on conventional textile structures and the lack of understanding of the mechanical circumstances experienced by textile devices hamper the further advancement of this technology. Here, textile pressure sensors based on triboelectric nanogenerators (TENGs) with machine washability and excellent breathability are manufactured by using machines to interlace robust Cu-coated polyacrylonitrile (Cu-PAN) yarns and parylene coated Cu-PAN (parylene-Cu-PAN) yarns via multiple textile industry compatible technologies for the first time, simultaneously achieving devices with stitched, woven, and knitted structures. TENG-based pressure sensors with different textile structures are investigated under as-fabricated conditions and after machine washing, and a relation is proposed between textile structure and the key characteristics of the sensors. The material/device designs, mechanical circumstances, manufacturing methods, etc., will affect the sensitivity, linearity, saturation trend and washability of the obtained sensors. Finally, a smart textile glove with stitched pressure sensors is made to demonstrate grip posture detection in various circumstances.
3D Waterproof MXene‐Based Textile Electronics for Physiology and Motion Signals Monitoring

Wenjing Fan,Cheng Li,Wei Li,Jin Yang

DOI: https://doi.org/10.1002/admi.202102553

IF: 5.4

2022-03-25

Advanced Materials Interfaces

Abstract:Abstract MXene‐based textile electronics are great promising wearable devices due to their potential applications in human healthcare and artificial intelligence but are generally hindered by the long response time and absence of physiological signal details. Herein, a novel MXene‐based textile pressure sensor fabricated by assembled MXene onto the scuba knit with a hollow structure is constructed. Benefiting from the high electrical conductivity, specific capacitance, and outstanding mechanical properties of MXene, the as‐designed textile sensor exhibits multiple splendid sensing properties, such as high sensitivity (GF = 23.7 kPa −1 ), fast response time (71.5 ms), great stability (over 20 000 cycles), and excellent waterproof capability (up to 6 h immersion in water). Based on these splendid properties, this sensor can not only perceive pulse signals with feature points and respiration signals with relatively low frequency but also identify joint activity and different words when attached to the subject's knee and throat. Furthermore, a personalized intelligent health monitoring system integrated with the MXene‐based textile sensor is developed to collect the physiological signals from different people and the support vector machine algorithm applied to identify and distinguish them, proposing a great advance in wearable health monitoring.

materials science, multidisciplinary,chemistry
A monolithically integrated in-textile wristband for wireless epidermal biosensing

Xiaohao Ma,Pengwei Wang,Liting Huang,Ruochen Ding,Kemeng Zhou,Yuqing Shi,Fan Chen,Qiuna Zhuang,Qiyao Huang,Yuanjing Lin,Zijian Zheng

DOI: https://doi.org/10.1126/sciadv.adj2763

2023-11-10

Abstract:Textile bioelectronics that allow comfortable epidermal contact hold great promise in noninvasive biosensing. However, their applications are limited mainly because of the large intrinsic electrical resistance and low compatibility for electronics integration. We report an integrated wristband that consists of multifunctional modules in a single piece of textile to realize wireless epidermal biosensing. The in-textile metallic patterning and reliable interconnect encapsulation contribute to the excellent electrical conductivity, mechanical robustness, and waterproofness that are competitive with conventional flexible devices. Moreover, the well-maintained porous textile architectures deliver air permeability of 79 mm s-1 and moisture permeability of 270 g m-2 day-1, which are more than one order of magnitude higher than medical tapes, thus ensuring superior wearing comfort. The integrated in-textile wristband performed continuous sweat potassium monitoring in the range of 0.3 to 40 mM with long-term stability, demonstrating its great potential for wearable fitness monitoring and point-of-care testing.
High-performance multimodal smart textile for artificial sensation and health monitoring

Xujing Zhang,Songsong Tang,Rui Ma,Zetong Chen,Jingting Zhuo,Lingyun Cao,Jin Yang,Guowei Yang,Fang Yi

DOI: https://doi.org/10.1016/j.nanoen.2022.107778

IF: 17.6

2022-12-01

Nano Energy

Abstract:Textile sensors are a branch of revolutionary electronics that carry tantalizing prospects toward myriad applications. However, their capability of differentiating multiple stimuli still remains a challenge. Here, we develop a multimodal smart textile that can simultaneously measure temperature and pulse/touch in real time, with high performance and no signal interference. The smart textile outputs two independent variables, with the whole textile as a triboelectric nanogenerator (TENG) to detect touch/pulse and its core thermoresistive micro/nano porous fiber strand (also is the TENG’s working electrode) to detect temperature. The stretchable core thermoresistive micro/nano porous fiber of the smart textile achieves record-high thermal sensitivity (β = 4994.55 K, α=−5.58%/K at 26 °C) and the fastest response/recovery time (97/239 ms) among previously reported fiber/textile-based temperature sensors, to our best knowledge. This fiber based on the growth of Fe2(MoO4)3 on graphene has much higher temperature sensing performance (∼3.2 times higher thermal sensitivity) than that based on directly blending Fe2(MoO4)3 and graphene. Moreover, the fiber has high thermal stability and its temperature sensing performance is insensitive to strain (stretching, bending and pressing). The smart textile is demonstrated for artificial sensation and health monitoring to simultaneously provide accurate profiles of both temperature and touch/pulse. This work provides new insights for wearable sensors.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Multimodal health monitoring via a hierarchical and ultrastretchable all-in-one electronic textile

Yidong Peng,Jiancheng Dong,Jiahui Sun,Yanheng Mao,Yuxi Zhang,Jiayan Long,Le Li,Chao Zhang,Yan Zhao,Hengyi Lu,Hai-Long Qian,Xiu-Ping Yan,Jianhua Zhao,Fangneng Wang,Yunpeng Huang,Tianxi Liu

DOI: https://doi.org/10.1016/j.nanoen.2023.108374

IF: 17.6

2023-03-25

Nano Energy

Abstract:Wearable electronics with conductive yet stretchable bio-interfaces, multimodal health regulating capabilities, and strong weather resistance are especially expected by athletes and outdoor workers, yet conventional rigid, impermeable, and monofunctional wearables can hardly meet these requirements simultaneously. Here, a hierarchical and ultrastretchable all-in-one health-regulating electronic textile (AIO E-textile) with robust superhydrophobic and antibacterial surfaces is developed through electrospin-assisted layer-by-layer assembly and liquid metal (LM) printing. Skin-like and bio-compatible styrene-ethylene-butylene-styrene (SEBS) nonwoven textile is employed as a breathable matrix for the layered E-textile, in which an electrophysiological recording circuit, a strain-sensing circuit, and a Joule heating circuit are successively patterned using EGaIn. To ensure human skin health and weather resistance of the device, antibacterial and waterproof surfaces are respectively installed on both sides of the electronic textile via anchoring functionalized nanoparticles. Thus, this ultrastretchable (1141 %) AIO E-textile shows favorable moisture permeability (1300 g m −2 day), exceptional water repellency, remarkable antibacterial efficacy (>99.99 %) against E-coli , and low-watt Joule heating ability, which even exhibits accurate under-water motion detection capability, and high-definition acquiring of bioelectrical signals (electrocardiogram (ECG) and surface electromyography (sEMG)) when used as flexible epidermal bioelectrode. This work opens up a new avenue for daily applicable and multifunctional on-skin electronics.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Flexible, Breathable, and Hydrophobic Iontronic Tactile Sensors Based on a Nonwoven Fabric Platform for Permeable and Waterproof Wearable Sensing Applications

Guifen Sun,Yongxiang Jiang,Hongchang Sun,Peng Wang,Chuizhou Meng,Shijie Guo

DOI: https://doi.org/10.1021/acsaelm.3c01369

IF: 4.494

2023-10-31

ACS Applied Electronic Materials

Abstract:Flexible tactile sensors are under high pursuit for wearable electronics toward healthcare monitoring, human–machine interaction, and artificial intelligence. Permeability and hydrophobicity are emerging unique properties and require significant dedication of research efforts. Herein, we develop a type of flexible, breathable, and waterproof iontronic tactile sensor based on a nonwoven fabric platform using a facile dip-drying and solution-spraying technique. The intrinsic open-ended porous structure of the fabric offers air permeability (∼224.9 mm s–1), and the stearic acid microsheets decorated on the outside of the sensor provides effective hydrophobic protection (water contact angle ∼151.9°). The designed electrode-to-electrolyte interfacing microstructures of MXene microspheres and nanosheets on the fabric electrodes and the hierarchical structures with conical secondary features of chrysanthemum pollen on the fabric electrolyte endow the sensor with a high sensitivity of 214.92 kPa–1 and a wide detection range of 0–45 kPa. Fast response time, low detection limit, good dynamic response, and excellent stability are also achieved. With the help of a home-built mechatronic sensing system, the developed fabric tactile sensor can be practically used either as sensor units for human health status monitoring and motion detection or as a sensor array for spatial pressure distribution identification of human–object interaction.

materials science, multidisciplinary,engineering, electrical & electronic
Epidermal Visualized Health Monitoring System Based on Stretchable and Washable TPU Hybrid Conductive Microtextiles

Jing-Bo Yuan,Zhi-Hong Feng,Dong-Chan Li,Yang Luo,Yun-Lei Zhou

DOI: https://doi.org/10.1007/s12598-023-02543-2

IF: 6.318

2024-01-01

Rare Metals

Abstract:Electronic textiles, an emerging class of electronic technology, offer exciting opportunities for seamless integration with the human body. Numerous applications have been developed based on electronic textiles. However, researches on integrating multiple electronic textile-based devices are still few. In this study, we present a system integrated with an electrocardiogram monitoring sensor and an electroluminescence device based on stretchable and washable conductive microtextiles. The signal is acquired by an electrocardiograph amplifier and displayed by a dual-color electroluminescence device based on the processed results. The integrated electronic device has excellent moisture permeability and comfort for long-term wearing. The system reported in this study opens a new avenue for the application of electronic textiles in health monitoring, robotic prosthetics, and competitive sports.
Ambulatory Cardiovascular Monitoring Via a Machine‐Learning‐Assisted Textile Triboelectric Sensor

Yunsheng Fang,Yongjiu Zou,Jing Xu,Guorui Chen,Yihao Zhou,Weili Deng,Xun Zhao,Mehrdad Roustaei,Tzung K. Hsiai,Jun Chen

DOI: https://doi.org/10.1002/adma.202104178

IF: 29.4

2021-08-31

Advanced Materials

Abstract:Wearable bioelectronics for continuous and reliable pulse wave monitoring against body motion and perspiration remains a great challenge and highly desired. Here, a low-cost, lightweight, and mechanically durable textile triboelectric sensor that can convert subtle skin deformation caused by arterial pulsatility into electricity for high-fidelity and continuous pulse waveform monitoring in an ambulatory and sweaty setting is developed. The sensor holds a signal-to-noise ratio of 23.3 dB, a response time of 40 ms, and a sensitivity of 0.21 µA kPa−1. With the assistance of machine learning algorithms, the textile triboelectric sensor can continuously and precisely measure systolic and diastolic pressure, and the accuracy is validated via a commercial blood pressure cuff at the hospital. Additionally, a customized cellphone application (APP) based on built-in algorithm is developed for one-click health data sharing and data-driven cardiovascular diagnosis. The textile triboelectric sensor enabled wireless biomonitoring system is expected to offer a practical paradigm for continuous and personalized cardiovascular system characterization in the era of the Internet of Things.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
An All‐Nanofiber‐Based, Breathable, Ultralight Electronic Skin for Monitoring Physiological Signals

Xiuzhu Lin,Yu Bing,Fan Li,Haixia Mei,Sen Liu,Teng Fei,Hongran Zhao,Tong Zhang

DOI: https://doi.org/10.1002/admt.202101312

IF: 6.8

2022-01-03

Advanced Materials Technologies

Abstract:Electronic skins (e‐skins) are a promising design paradigm for health care systems and human–machine interactions. Piezoresistive sensors made with simple structures, high sensitivity, mass production methods, light weight, and comfort for long‐term wearing and physiological signal monitoring remain a challenge and are urgently desirable. Here, a breathable and lightweight all‐nanofiber piezoresistive (ANFP) sensor is presented, which is composed of three layers of electrospun nanofibers (NFs). A specific interpenetrating network of conductive polyvinylpyrrolidone NFs coated by polypyrrole (PVP@PPy) and insulating polyacrylonitrile NFs is constructed by controlling the vapor growth position of PPy to enhance the sensitivity. The ANFP sensor can achieve the real‐time monitoring of multiple parts of physiological signals, and a wireless detection system is designed for the online monitoring of human pulses. The NF network endows excellent breathability and heat dissipation to the ANFP sensors during practical application, which ensures comfort and device stability during long‐term wearing. Finally, a pressure sensing array with 5 × 5 pixels is fabricated to demonstrate the potential applications in spatial pressure detection. This work provides a viable strategy to improve the wearability of e‐skins, which can promote health care and human–machine interaction applications. A flexible, breathable, and ultralight all‐nanofiber electronic skin for whole‐body physiological signal monitoring is developed. By in situ encapsulation of sensitive layer, a polyacrylonitrile and polyvinylpyrrolidone covered by polypyrrole hybrid fiber membrane is inserted into thermoplastic polyurethane fibrous membrane. The interlaced nanofiber network and micro‐to‐nano hierarchical structures can enhance pressure sensitivity and improve thermal‐moisture transfer.

materials science, multidisciplinary
Skin-Inspired Textile Electronics Enable Ultrasensitive Pressure Sensing

Xianhong Zheng,Dashuang Zhou,Zhi Liu,Xinghua Hong,Changlong Li,Shanhai Ge,Wentao Cao

DOI: https://doi.org/10.1002/smll.202310032

IF: 13.3

Small

Abstract:Wearable pressure sensors have attracted great interest due to their potential applications in healthcare monitoring and human-machine interaction. However, it is still a critical challenge to simultaneously achieve high sensitivity, low detection limit, fast response, and outstanding breathability for wearable electronics due to the difficulty in constructing microstructure on a porous substrate. Inspired by the spinosum microstructure of human skin for highly-sensitive tactile perception, a biomimetic flexible pressure sensor is designed and fabricated by assembling MXene-based sensing electrode and MXene-based interdigitated electrode. The product biomimetic sensor exhibits good flexibility and suitable air permeability (165.6 mm s-1), comparable to the typical air permeable garments. Benefiting from the two-stage amplification effect of the bionic intermittent structure, the product bionic sensor exhibits an ultrahigh sensitivity (1368.9 kPa-1), ultrafast response (20 ms), low detection limit (1 Pa), and high-linearity response (R2 = 0.997) across the entire sensing range. Moreover, the pressure sensor can detect a wide range of human motion in real-time through intimate skin contact, providing essential data for biomedical monitoring and personal medical diagnosis. This principle lays a foundation for the development of human skin-like high-sensitivity, fast-response tactile sensors.
Wearable, ultrathin and breathable tactile sensors with an integrated all-nanofiber network structure for highly sensitive and reliable motion monitoring

Peng Wang,Guifen Sun,Wei Yu,Guoxian Li,Chuizhou Meng,Shijie Guo

DOI: https://doi.org/10.1016/j.nanoen.2022.107883

IF: 17.6

2022-12-15

Nano Energy

Abstract:Wearable tactile sensors are under high pursuit in healthcare monitoring. However, most of previous sensors were assembled by non-binding multilayers and built on airtight substrates, hindering the wearability with comfort. Herein, we develop an ultrathin and breathable tactile sensor based on an integrated all-nanofiber network via a facile electrospinning and spray-drying technique. The sensor is constructed by directly ink-patterning of conductive Co3O4/PEDOT:PSS/AgNW electrodes on both sides of one single ionic IL/TPU fabric electrolyte mat, the overall thickness of which is only 40 μm for a conformal attachment on any curved surface. The highly porous nanofiber network endows the sensor with both high air and moisture permeabilities, ensuring an excellent comfortability for a long-time wearing. Due to the pseudocapacitive sensing mechanism and nanofiber-based microstrucutre, the sensor exhibits ultrahigh sensitivity of 79.5 kPa−1, fast response time of 40 ms, and a wide detection range of 38 kPa. Reliability tests show that the sesnor is capable of outputting stable and repeatable sensing signals for over 10,000 loading/unloading cycles of 5 kPa on testing machine and for over 5,000 s of continuous motion detection of foot stamping and elbow bending. Monitoring of arm swinging and elbow bending by sensor units and recognition of hand gesture by sensor array are also demonstrated towards practical wearable sensing applications.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Supersensitive All-Fabric Pressure Sensors Using Printed Textile Electrode Arrays for Human Motion Monitoring and Human–machine Interaction

Ziqiang Zhou,Ying Li,Jiang Cheng,Shanyong Chen,Rong Hu,Xingwu Yan,Xiaoqing Liao,Canming Xu,Junsheng Yu,Lu Li

DOI: https://doi.org/10.1039/c8tc02716a

IF: 6.4

2018-01-01

Journal of Materials Chemistry C

Abstract:Supersensitive all-fabric pressure sensors with a bottom interdigitated textile electrode screen-printed using silver paste and a top bridge of AgNW-coated cotton fabric are successfully fabricated for human motion monitoring and human–machine interaction.
All‐Organic Smart Textile Sensor for Deep‐Learning‐Assisted Multimodal Sensing

Pengfei Zhao,Yilin Song,Peng Xie,Fan Zhang,Tao Xie,Gang Liu,Jiyu Zhao,Su‐Ting Han,Ye Zhou

DOI: https://doi.org/10.1002/adfm.202301816

IF: 19

2023-04-18

Advanced Functional Materials

Abstract:An all‐organic textile sensor capable of discriminately sensing pressure, proximity, and temperature stimuli is developed. Outstanding washability and breathability are demonstrated. By combining with the deep‐learning technique, an all‐textile sensing system is established to recognize object shape, contactless trajectory, and even environmental temperature, showing a promising identification ability for complex information. Smart textile for sensor is identified as a superior platform with greatly improved convenience and comfort for wearable bioelectronics. However, most reported textile‐based sensors cannot fully demonstrate the inherent advantages of textiles, such as comfortability, breathability, biocompatibility, and environmental friendliness, mainly due to the intrinsic limitation of non‐textile or inorganic components. Here, an all‐textile, all‐organic, washable, and breathable sensor with discriminable pressure, proximity, and temperature sensing function is first reported. Multiple sensing functions and outstanding washability are demonstrated. The all‐textile sensor can also be seamlessly integrated into diverse types of fabrics to realize wide‐range sensing of human activities and noncontact stimuli without sacrificing biocompatibility and comfortability. Additionally, by combining with the deep‐learning technique, an all‐textile sensing system is established to recognize object shape, contactless trajectory, and even environmental temperature. These results open a new avenue for designing low‐cost, washable, comfortable, and biocompatible green textile electronics, providing a meaningful guideline in intelligent textiles.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Unidirectional Moisture-Wicking PAN/BTO-PVDF/ZnO All Fibrous Bilayer Breathable Electronic Skin for Health Sensing

Jun Zhang,Kainan Guo,Jinke Guo,Md All Amin Newton,Tingxiao Li,Binjie Xin

DOI: https://doi.org/10.1016/j.polymer.2024.127815

IF: 4.6

2024-11-22

Polymer

Abstract:All fibrous electronic skin based on excellent flexibility and piezoelectric properties could be widely applied in monitoring and healthcare sensing. The accumulative moisture during application scenarios, just as violent sweat or a damp environment, can affect the stability and sensitivity of the piezoelectric signal. Here, a bilayer piezoelectric sensor was fabricated using a layer-by-layer electrospinning technique. The inner layer is composed of hydrophobic piezoelectric polyvinylidene fluoride (PVDF)-zinc oxide (ZnO) nanofibers, while the outer layer consists of hydrophilic piezoelectric polyacrylonitrile (PAN)-barium titanate (BTO) nanofibers. The unidirectional moisture-wicking performance based on the hydrophilic-hydrophobic gradient of PVDF/ZnO-PAN/BTO nanofiber membranes (PZ-PBNF) could conduct liquid within 1 s. Incorporating inorganic ZnO and BTO nanoparticles provides a practical approach to enhancing the piezoelectric output performance (277.5 mV). These fibrous PZ-PBNF membranes also exhibit excellent stretchability properties (breaking elongation of 110 %) and air permeability (12.065 mm/s). This innovative electronic skin with directional water transport and sensing functions could ensure long-term wear comfort for practical application in emerging wearable technologies and all healthcare ranges.

polymer science
3D E-textile for Exercise Physiology and Clinical Maternal Health Monitoring

Junyi Zhao,Chansoo Kim,Weilun Li,Zichao Wen,Zhili Xiao,Yong Wang,Shantanu Chakrabartty,Chuan Wang

2024-07-11

Abstract:Electronic textiles (E-textiles) offer great wearing comfort and unobtrusiveness, thus holding potential for next-generation health monitoring wearables. However, the practical implementation is hampered by challenges associated with poor signal quality, substantial motion artifacts, durability for long-term usage, and non-ideal user experience. Here, we report a cost-effective E-textile system that features 3D microfiber-based electrodes for greatly increasing the surface area. The soft and fluffy conductive microfibers disperse freely and securely adhere to the skin, achieving a low impedance at the electrode-skin interface even in the absence of gel. A superhydrophobic fluorinated self-assembled monolayer was deposited on the E-textile surface to render it waterproof while retaining the electrical conductivity. Equipped with a custom-designed motion-artifact canceling wireless data recording circuit, the E-textile system could be integrated into a variety of smart garments for exercise physiology and health monitoring applications. Real-time multimodal electrophysiological signal monitoring, including electrocardiogram (ECG) and electromyography (EMG), was successfully carried out during strenuous cycling and even underwater swimming activities. Furthermore, a multi-channel E-textile was developed and implemented in clinical patient studies for simultaneous real-time monitoring of maternal ECG and uterine EMG signals, incorporating spatial-temporal potential mapping capabilities.

Medical Physics,Materials Science,Soft Condensed Matter
A flexible pressure sensor based on an MXene–textile network structure

Tongkuai Li,Longlong Chen,Xiang Yang,Xin Chen,Zhihan Zhang,Tingting Zhao,Xifeng Li,Jianhua Zhang

DOI: https://doi.org/10.1039/c8tc04893b

IF: 6.4

2019-01-01

Journal of Materials Chemistry C

Abstract:High-performance pressure sensors have attracted considerable attention recently due to their promising applications in touch displays, wearable electronics, human-machine interfaces, and real-time physiological signal perception. However, the functionality of a sensor is generally incompatible with simple fabrication strategies. Therefore, strategies that are less equipment-intensive and less expensive are required for enhancing the sensor performance. Here, we propose a flexible piezoresistive pressure sensor based on MXene-textile prepared by a facile dip-coating process. Benefiting from the excellent electrical properties of MXene and the abundant wavy surface of cotton textile, this pressure sensor exhibits high sensitivity (12.095 kPa(-1) for the range 29-40 kPa and 3.844 kPa(-1) for the range less than 29 kPa) with a rapid response time of 26 ms, and excellent cycling stability (5600 cycles). The real-time monitoring of human physiological signals such as wrist pulse, voice detection, and finger movements can be achieved by using this MXene-textile sensor. In addition, sensory arrays were successfully applied in the pressure distribution mapping of a key, demonstrating that the pressure sensor can be used as part of wearable devices and human-machine interfaces to sense pressure.
Synergetic Monitoring of both Physiological Pressure and Epidermal Biopotential Based on a Simplified on-Skin-Printed Sensor Modality

Yangyang Song,Wenjuan Ren,Yiqun Zhang,Qi Liu,Zhen Peng,Xiaodong Wu,Zhuqing Wang

DOI: https://doi.org/10.1002/smll.202303301

IF: 13.3

Small

Abstract:Flexible electronic sensors show great potential for health monitoring but are usually limited to single sensing functionality. To enrich their functions, complicated device configurations, sophisticated material systems, and preparation processes are typically involved, obstructing their large-scale deployment and widespread application. Herein, to achieve a good balance between simplicity and multifunctionality, a new paradigm of sensor modality for both mechanical sensing and bioelectrical sensing is presented based on a single material system and a simple solution processing approach. The whole multifunctional sensors are constructed with a pair of highly conductive ultrathin electrodes (WPU/MXene-1) and an elastic micro-structured mechanical sensing layer (WPU/MXene-2), with the human skin serving as the substrate for the whole sensors. The resultant sensors show high pressure sensitivity and low skin-electrode interfacial impedance, enabling to synergetically monitor both physiological pressure (e.g., arterial pulse signals) and epidermal bioelectrical signals (including electrocardiograph and electromyography). The universality and extensibility of this methodology to construct multifunctional sensors with different material systems are also verified. This simplified sensor modality with enhanced multifunctionality provides a novel design concept to construct future smart wearables for health monitoring and medical diagnosis.
Weavable and stretchable piezoresistive carbon nanotubes-embedded nanofiber sensing yarns for highly sensitive and multimodal wearable textile sensor

Kun Qi,Yuman Zhou,Kangkang Ou,Yunling Dai,Xiaolu You,Hongbo Wang,Jianxin He,Xiaohong Qin,Rongwu Wang

DOI: https://doi.org/10.1016/j.carbon.2020.07.042

IF: 10.9

2020-12-01

Carbon

Abstract:<p>Developing multimodal wearable textile sensors to simulate the complex human skin characteristics is central for healthcare, electronic skins, artificial intelligence and biomedical electronic applications. In this paper, stretchable piezoresistive carbon nanotubes-embedded nanofiber sensing yarns are successfully produced and mechanically robust enough to be woven to a wearable textile sensor that can detect and differentiate the multiple mechanical stimuli of pressure, stretching and bending. The smart nanofiber sensing yarn is obtained by wrapping piezoresistive elastic nanofibers onto a stretchable fiber-shaped core electrode with a facile electrospinning technique. The delicate hierarchical structure of this textile sensor ranges from the 1D macroscopic yarns to the submicron elastic nanofibers and internal nanoscale CNT percolation networks. This type of sensor offers a relatively larger contact area, multiple contact sites and larger deformation space for multimodal sensing various mechanical stimuli with improved sensitivity and broad sensing range. The textile-based sensor can be conformally attached to complex surfaces or integrated into a textile, demonstrating an excellent capability of continuous transient detection and differentiation of dynamic human movements. Moreover, a textile sensing platform is successfully integrated for spatially mapping the pressure and strain distribution, which makes it a promising candidate for electronic textiles and wearable devices.</p>

materials science, multidisciplinary,chemistry, physical

Machine-knitted washable sensor array textile for precise epidermal physiological signal monitoring

Battery‐Free and Wireless Epidermal Electrochemical System with All‐Printed Stretchable Electrode Array for Multiplexed in Situ Sweat Analysis

Wearable 3-D Meshed Textile Pressure Sensor for Physiological Signal Monitoring

Machine-washable and breathable pressure sensors based on triboelectric nanogenerators enabled by textile technologies

3D Waterproof MXene‐Based Textile Electronics for Physiology and Motion Signals Monitoring

A monolithically integrated in-textile wristband for wireless epidermal biosensing

High-performance multimodal smart textile for artificial sensation and health monitoring

Multimodal health monitoring via a hierarchical and ultrastretchable all-in-one electronic textile

Flexible, Breathable, and Hydrophobic Iontronic Tactile Sensors Based on a Nonwoven Fabric Platform for Permeable and Waterproof Wearable Sensing Applications

Epidermal Visualized Health Monitoring System Based on Stretchable and Washable TPU Hybrid Conductive Microtextiles

Ambulatory Cardiovascular Monitoring Via a Machine‐Learning‐Assisted Textile Triboelectric Sensor

An All‐Nanofiber‐Based, Breathable, Ultralight Electronic Skin for Monitoring Physiological Signals

Skin-Inspired Textile Electronics Enable Ultrasensitive Pressure Sensing

Wearable, ultrathin and breathable tactile sensors with an integrated all-nanofiber network structure for highly sensitive and reliable motion monitoring

Supersensitive All-Fabric Pressure Sensors Using Printed Textile Electrode Arrays for Human Motion Monitoring and Human–machine Interaction

All‐Organic Smart Textile Sensor for Deep‐Learning‐Assisted Multimodal Sensing

Unidirectional Moisture-Wicking PAN/BTO-PVDF/ZnO All Fibrous Bilayer Breathable Electronic Skin for Health Sensing

3D E-textile for Exercise Physiology and Clinical Maternal Health Monitoring

A flexible pressure sensor based on an MXene–textile network structure

Synergetic Monitoring of both Physiological Pressure and Epidermal Biopotential Based on a Simplified on-Skin-Printed Sensor Modality

Weavable and stretchable piezoresistive carbon nanotubes-embedded nanofiber sensing yarns for highly sensitive and multimodal wearable textile sensor