In Premises Positioning - Fuzzy Logic

R. G. Crespo,Gloria García Fernández,Oscar Sanjuán Martínez,Vicente García Díaz,Luis Joyanes Aguilar,E. T. Franco

DOI: https://doi.org/10.1007/978-3-642-02481-8_41

2009-06-06

Abstract:

What problem does this paper attempt to address?

Battery‐Free and Wireless Epidermal Electrochemical System with All‐Printed Stretchable Electrode Array for Multiplexed in Situ Sweat Analysis

Gang Xu,Chen Cheng,Zhaoyang Liu,Wei Yuan,Xinzhou Wu,Yanli Lu,Sze Shin Low,Jinglong Liu,Lihang Zhu,Daizong Ji,Shuang Li,Zetao Chen,Lisha Wang,Qinggang Yang,Zheng Cui,Qingjun Liu

DOI: https://doi.org/10.1002/admt.201800658

IF: 6.8

2019-01-01

Advanced Materials Technologies

Abstract:Skin-interfaced electrochemical sensing devices are widely developed for biochemical sensing at molecular levels. However, the sensing electrodes fabricated with photolithography or printing technique are hard to achieve high stretchability without special designs like serpentine shape. Also, most of them require wired connections with external electrochemical workstations for data acquisition or on-board batteries to power the circuits, which largely restrain the flexibility, simplification, and miniaturization of the devices. Here, a battery-free, wireless, and epidermal electrochemical system is presented for in situ biochemical sensing. The sensing component of the system is a stretchable electrode array all-printed with soft polymer and conductive silver nanowires. The electrodes show stable electrical properties within strain range of 0-50%, without serpentine designs. The electronic component of the system is a fully integrated flexible circuit board with near field communication module, which enables wireless energy harvesting and data transmission with smartphones. The system demonstrates good performance in real-time on-body sweat analysis for simultaneous quantitative detections of glucose, hydrogen, sodium, and potassium. This battery-free and wireless epidermal electrochemical system provides a simplified, miniaturized, and flexible solution for a wide range of biochemical platforms, including wearable and implanted bioelectronics.
Crosstalk-free Hybrid Integrated Multimodal Sensor for Human Temperature, Humidity, and Pressure Monitoring

Yuanbin Mu,Jiagen Cheng,Wei Shi,Weihuang Yang,Fengjie Qiao,Shan Wang,Chenxi Yue,Chaoran Liu,Yu Gao,Jianhao Zhang,Pengfei Chen,Dujuan Li,Jianfeng Ping,Linxi Dong

DOI: https://doi.org/10.1016/j.xcrp.2024.102223

IF: 8.9

2024-01-01

Cell Reports Physical Science

Abstract:Current developments in flexible sensors for epidermal pressure monitoring lack a fully integrated multimodal solution due to challenges such as crosstalk and complex integration processes. Here, a crosstalk-free multimodal sensor is presented by simple vertical lamination and spraying. Except for integrating the multimodal sensor, the device is equipped with a signal conditioning circuit, enhancing its portability. Importantly, each sensor is sensitive only to its specific stimulus but not to other stimuli, enabling signal decoupling without complex algorithms. The pressure sensor exhibits enhanced sensitivity (eight times greater than unstructured designs), and the temperature sensor shows a high sensitivity of 60.64 U / degrees C and a linearity of R2 2 = 0.9982 below 160 degrees C. degrees C. Meanwhile, the capacitance of the humidity sensor varies by 72 pF as humidity increases from 15% to 95%. The high integration and simple fabrication process provides a promising design concept for application in pressure ulcer prevention and telemedicine.
An Integrated Stretchable Sensing Patch for Simultaneously Monitoring of Physiological and Biochemical Parameters

Wenhao Pan,Shiyi Xu,Xiyu Mao,Tianyu Li,Qingpeng Cao,Xuesong Ye,Bo Liang

DOI: https://doi.org/10.1109/NEMS51815.2021.9451353

2021-01-01

Abstract:Application of wearable sensors for sports monitoring provides real-time insight into an athlete's physical condition. At present, most wearable sensing devices measure only a small number of physical or electrophysiological parameters, but neglect the rich chemical information available from biomarkers in human body fluid. This work developed a multi-parameter monitoring device based on flexible ...
Smart MXene-based Bioelectronic Devices as Wearable Self-powered Health Monitor for Sensing Human Physiological Signals

Sancan Han,Mingchen Zou,Xinxin Pu,Yifei Lü,Yuecheng Tian,Yi Liu,Fangyu Wu,Ningge Huang,Enming Song,Ding Wang

DOI: https://doi.org/10.22541/au.167407893.37415497/v1

2023-01-01

Abstract:Biosafe wearable healthcare monitor has attracted significant attention owing to their applicability to wearable electronics. However, the narrow sensing range and poor response limit the application of flexible devices for comprehensive monitoring of human health-related physiological signals (i.e. pulse diagnosis). Critical challenges remain in the development of biocompatible materials and the design of flexible bio-integrated platforms for these purposes, targeting performance approaching those of conventional wafer-based technologies and long-term operational stability. In this context, this work presents a robust and flexible MXene/polydopamine (PDA)-composite-film-based pressure sensor in a portable/wearable fashion, which establishes a unique intercalated spherical-like PDA molecules structure, thereby resulting in excellent sensing performance. The MXene/PDA-based pressure sensor has sensitivity of up to 138.8 kPa-1 in the pressure range of 0.18-6.20 kPa with fast response and recovery speed (t1<100 ms; t2<50 ms). Associated embodiment involves real-time precise measurements of a variety of health-related physiological signals, ranging from wrist pulse, to finger motions, to vocalization and to facial expressions, with high sensitivity and accuracy. Studies on human subjects establish the clinical significance of these devices for future opportunities of health monitoring and intelligent control to predict and diagnose diseases.
Smart MXene‐based Bioelectronic Devices As Wearable Health Monitor for Sensing Human Physiological Signals

Sancan Han,Mingchen Zou,Xinxin Pu,Yifei Lu,Yuecheng Tian,Huijun Li,Yi Liu,Fangyu Wu,Ningge Huang,Meihua Shen,Enming Song,Ding Wang

DOI: https://doi.org/10.1002/viw.20230005

2023-01-01

View

Abstract:AbstractBiosafe wearable healthcare monitor has attracted significant attention owing to their applicability to wearable electronics. However, the narrow sensing range and poor response limit the application of flexible devices for comprehensive monitoring of human health‐related physiological signals (i.e., pulse diagnosis). Critical challenges remain in the development of biocompatible materials and the design of flexible bio‐integrated platforms for these purposes, targeting performance approaching those of conventional wafer‐based technologies and long‐term operational stability. In this context, this work presents a robust and flexible MXene/polydopamine (PDA)‐composite‐film‐based pressure sensor in a portable/wearable fashion, which establishes a unique intercalated spherical‐like PDA molecules structure, thereby resulting in excellent sensing performance. The MXene/PDA‐based pressure sensor has sensitivity of up to 138.8 kPa−1 in the pressure range of 0.18–6.20 kPa with fast response and recovery speed (t1 < 100 ms; t2< 50 ms). Associated embodiment involves real‐time precise measurements of a variety of health‐related physiological signals, ranging from wrist pulse, to finger motions, to vocalization and to facial expressions, with high sensitivity and accuracy. Studies on human subjects establish the clinical significance of these devices for future opportunities of health monitoring and intelligent control to predict and diagnose diseases.
A dual-mode wearable sensor with coupled ion and pressure sensing

Biao Ma,Ke Huang,Gangsheng Chen,Yingnan Tian,Nan Jiang,Chao Zhao,Hong Liu

DOI: https://doi.org/10.20517/ss.2023.41

2024-01-08

Soft Science

Abstract:Simultaneous monitoring of the body's biochemical and biophysical signals via wearable devices can provide a comprehensive assessment of an individual's health state. However, current multifunctional sensors for synchronous biochemical and biophysical sensing rely on discrete sensing units, posing a limitation in increased complexity in device assembly, signal processing, and system integration. In this study, we report a dual-mode and self-powered wearable sensor with ion and pressure-sensing capabilities by interfacing a hydrogel film with a solid ion-selective electrode. The hydrogel film can not only collect natural sweat from the skin but also offer a piezoionic response to pressure. We show that wrist pulse-induced pressure response can be incorporated into the noise of the response to sweat sodium ions, allowing for the simultaneous measurement of heart rate and sweat electrolytes. This work provides an example of simplifying the development of wearable multimode sensors through the rational design of classic electrochemical sensors.
Home-Made, Self-Powered, Skin-Attachable Sensing Platform for Diverse Vital Sign Monitoring

Xiaodong Wu,Wenjuan Ren,Yuhan Wen,Seiya Ono,Juan Zhu,James W Evans,Ana C Arias

DOI: https://doi.org/10.1021/acssensors.3c00630

IF: 8.9

2023-06-23

ACS Sensors

Abstract:Wearable electronic sensors that can perform real-time, continuous, and high-fidelity monitoring of diverse biophysical signals from the human body are burgeoning and exhibit great potential to transform traditional clinical healthcare. However, such emerging devices often suffer from strict requirements of special precursor materials and sophisticated fabrication procedures. Here, we present a new paradigm of a self-powered, skin-attachable, and multifunctional sensing platform that can be...

chemistry, multidisciplinary, analytical,nanoscience & nanotechnology
Integrated Blood Pressure-Chemical Sensing Epidermal Patch

Juliane Sempionatto,Muyang Lin,Lu Yin,Ernesto de la Paz,Kexin Pei,Thitaporn Sonsa-ard,Andre de Loyola Silva,Ahmed Khorshed,Fangyu Zhang,Nicholas Tostado,Sheng Xu,Joseph Wang

DOI: https://doi.org/10.21203/rs.3.rs-40455/v1

2020-07-17

Abstract:Abstract The growing demand for tracking the effects of diverse daily activities upon the body physiological response calls for continuous monitoring devices, with integrated hemodynamic and metabolic sensing modalities. This work presents the first demonstration of an integrated wearable sensor that monitors the blood pressure and heart rate via ultrasonic transducers, along with parallel non-invasive electrochemical detection of biomarker levels, such as glucose, lactate, caffeine, and alcohol, in sweat and interstitial fluid. Such simultaneous non-invasive blood-pressure/chemical sensing was implemented by monitoring the dynamic effects of everyday activities, such as exercise and intake of food and drinks, upon the user’s physiological states. Leveraging novel material selection and assembly processes, the multiplexed sensing modalities were optimized to ensure reliable sensing without crosstalk between individual sensors, along with mechanical resiliency and flexibility for conformal contact to curved skin surfaces. The simultaneous acoustic and electrochemical sensors were evaluated on multiple human subjects under different stimuli, and the dynamic correlation of the hemodynamic activities and corresponding metabolic variations was monitored and discussed. Such multimodal blood-pressure/chemical wearable sensor offers a collection of previously unavailable information towards enhancing our understanding of the body’s response to common activities while holding considerable promise for predicting abnormal cardiac events and improving remote, telemetric, and personalized healthcare medical outcome.
An epidermal patch for the simultaneous monitoring of haemodynamic and metabolic biomarkers

Juliane R. Sempionatto,Muyang Lin,Lu Yin,Ernesto De la paz,Kexin Pei,Thitaporn Sonsa-ard,Andre N. de Loyola Silva,Ahmed A. Khorshed,Fangyu Zhang,Nicholas Tostado,Sheng Xu,Joseph Wang

DOI: https://doi.org/10.1038/s41551-021-00685-1

IF: 28.1

2021-02-15

Nature Biomedical Engineering

Abstract:Monitoring the effects of daily activities on the physiological responses of the body calls for wearable devices that can simultaneously track metabolic and haemodynamic parameters. Here we describe a non-invasive skin-worn device for the simultaneous monitoring of blood pressure and heart rate via ultrasonic transducers and of multiple biomarkers via electrochemical sensors. We optimized the integrated device so that it provides mechanical resiliency and flexibility while conforming to curved skin surfaces, and to ensure reliable sensing of glucose in interstitial fluid and of lactate, caffeine and alcohol in sweat, without crosstalk between the individual sensors. In human volunteers, the device captured physiological effects of food intake and exercise, in particular the production of glucose after food digestion, the consumption of glucose via glycolysis, and increases in blood pressure and heart rate compensating for oxygen depletion and lactate generation. Continuous and simultaneous acoustic and electrochemical sensing via integrated wearable devices should enrich the understanding of the body's response to daily activities, and could facilitate the early prediction of abnormal physiological changes.

engineering, biomedical
Skin-Inspired Textile Electronics Enable Ultrasensitive Pressure Sensing

Xianhong Zheng,Dashuang Zhou,Zhi Liu,Xinghua Hong,Changlong Li,Shanhai Ge,Wentao Cao

DOI: https://doi.org/10.1002/smll.202310032

IF: 13.3

Small

Abstract:Wearable pressure sensors have attracted great interest due to their potential applications in healthcare monitoring and human-machine interaction. However, it is still a critical challenge to simultaneously achieve high sensitivity, low detection limit, fast response, and outstanding breathability for wearable electronics due to the difficulty in constructing microstructure on a porous substrate. Inspired by the spinosum microstructure of human skin for highly-sensitive tactile perception, a biomimetic flexible pressure sensor is designed and fabricated by assembling MXene-based sensing electrode and MXene-based interdigitated electrode. The product biomimetic sensor exhibits good flexibility and suitable air permeability (165.6 mm s-1), comparable to the typical air permeable garments. Benefiting from the two-stage amplification effect of the bionic intermittent structure, the product bionic sensor exhibits an ultrahigh sensitivity (1368.9 kPa-1), ultrafast response (20 ms), low detection limit (1 Pa), and high-linearity response (R2 = 0.997) across the entire sensing range. Moreover, the pressure sensor can detect a wide range of human motion in real-time through intimate skin contact, providing essential data for biomedical monitoring and personal medical diagnosis. This principle lays a foundation for the development of human skin-like high-sensitivity, fast-response tactile sensors.
A facile and novel design of multifunctional electronic skin based on polydimethylsiloxane with micropillars for signal monitoring.

Shunbo Li,Maowen Chen,Chuanchuan Lin,K. Cai,Bailong Tao,Y. Jia,Songyue Zhang,Zengzilu Xia

DOI: https://doi.org/10.1039/d0tb00954g

2020-08-12

Abstract:Electronic skins (e-skins) with monitoring capabilities have attracted extensive attention and are being widely employed in wearable devices for medical diagnosis. In particular, e-skins based on strain sensors have been reported extensively due to their simple structure and efficient performance in collecting human physiological information. Flexible sensors with high sensitivity, simplified fabrication, and low-cost are highly desired for human signal monitoring; this work provides a novel strain-sensing e-skin with micro-structures, which is simply made of modified polydimethylsiloxane (PDMS) and silver nanowires (AgNWs). The fabricated e-skin has great sensitivity towards strain changes, and its mechanical properties and sensitivity could be regulated by varying the micro-structures. Furthermore, the e-skin demonstrated significant capacity for monitoring human body movements, temperature changes, and spatial resolution, highlighting its great potential in personalized medicine.

Medicine,Engineering,Materials Science
Skin-electrode iontronic interface for mechanosensing

Pang Zhu,Huifeng Du,Xingyu Hou,Peng Lu,Liu Wang,Jun Huang,Ningning Bai,Zhigang Wu,Nicholas X Fang,Chuan Fei Guo

DOI: https://doi.org/10.1038/s41467-021-24946-4

2021-08-05

Abstract:Electrodermal devices that capture the physiological response of skin are crucial for monitoring vital signals, but they often require convoluted layered designs with either electronic or ionic active materials relying on complicated synthesis procedures, encapsulation, and packaging techniques. Here, we report that the ionic transport in living systems can provide a simple mode of iontronic sensing and bypass the need of artificial ionic materials. A simple skin-electrode mechanosensing structure (SEMS) is constructed, exhibiting high pressure-resolution and spatial-resolution, being capable of feeling touch and detecting weak physiological signals such as fingertip pulse under different skin humidity. Our mechanical analysis reveals the critical role of instability in high-aspect-ratio microstructures on sensing. We further demonstrate pressure mapping with millimeter-spatial-resolution using a fully textile SEMS-based glove. The simplicity and reliability of SEMS hold great promise of diverse healthcare applications, such as pulse detection and recovering the sensory capability in patients with tactile dysfunction.
Bioinspired, multifunctional dual-mode pressure sensors as electronic skin for decoding complex loading processes and human motions

Ye Qiu,Ye Tian,Shenshen Sun,Jiahui Hu,Youyan Wang,Zheng Zhang,Aiping Liu,Huanyu Cheng,Weizhan Gao,Wenan Zhang,Hao Chai,Huaping Wu

DOI: https://doi.org/10.1016/j.nanoen.2020.105337

IF: 17.6

2020-12-01

Nano Energy

Abstract:<p>Mimicry of the somatosensory system in the human skin via electronic devices exhibits broad applications in intelligent robotics and wearable electronics. Here, we report a novel biomimetic flexible dual-mode pressure sensor that is based on the interlocked piezoelectric and piezoresistive films with pyramid microstructures. The sensitivity of the sensor is significantly enhanced because of the induced larger stain variation along the thickness direction of the former piezoelectric film and increased contact area in the latter piezoresistive film. The synergistic effect of the piezoelectric and piezoresistive responses to stimuli also allows the dual-mode sensor to detect over broad pressure and frequency ranges. The analysis of these signals can deconvolute multiple aspects of the complex stimuli loading processes, including their loading direction, rate, magnitude, and duration. As a proof-of-concept demonstration, the dual-mode pressure sensor is successfully integrated with manipulators and human bodies to decode the complex and delicate picking processes and human motions, respectively. When combined with the other sensing modalities, the multifunctional dual-mode pressure sensor delivers new application opportunities in intelligent soft robotics and human-machine interfaces.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Multimodal Pressure Sensor: Advancing Continuous Cardiovascular Monitoring through Synergistic Capacitive and Piezoresistive Sensing

Azmal Huda Chowdhury,Borzooye Jafarizadeh,Nezih Pala,Chunlei Wang

DOI: https://doi.org/10.1149/ma2024-01532872mtgabs

2024-08-09

ECS Meeting Abstracts

Abstract:Recent advancements in flexible and skin-mountable health monitoring devices have sparked interest in non-invasive methods for continuously capturing subtle human physiological signals. Among these, pressure sensors play a pivotal role, particularly in applications involving pulse detection and electronic skin. While various mechanisms like piezoresistive, capacitive, triboelectric, and piezoelectric sensors have shown promise, their reliance on flexible substrates presents an opportunity to merge different sensing mechanisms into a single, multifaceted sensor, thereby maximizing benefits and mitigating limitations. This study introduces a novel approach by proposing and fabricating a multimodal sensor that seamlessly combines the piezoresistive and capacitive modes of operation. Leveraging finite element analysis, we established design parameters tailored to create a highly sensitive piezoresistive sensor capable of discerning weak arterial pulse waveforms. Simultaneously, for the capacitive sensor aspect, we optimized the performance of a supercapacitive sensor utilizing paper as the sensing layer. This innovative approach in capacitive sensing offers high sensitivity and reliability. The fabrication of both sensors culminated in their integration into a compact, multi-mechanism sensing platform. The resultant multimodal sensor holds promise as a sophisticated, wearable technology for continuous monitoring of cardiovascular pulse waveforms at wrist arterial sites. By synergizing the advantages of capacitive and piezoresistive mechanisms, this innovation paves the way for enhanced accuracy and precision in capturing and analyzing subtle physiological signals.
Multistage Microstructured Ionic Skin for Real‐Time Vital Signs Monitoring and Human‐Machine Interaction

Xueke Wang,Jinyu Zi,Yi Chen,Qiang Wu,Zhimin Xiang,Yongqiang Tu,Peng Yang,Yanfen Wan

DOI: https://doi.org/10.1002/eem2.12767

IF: 15

2024-05-28

Energy & Environmental Materials

Abstract:Inspired by the multi‐level interlocking structure in human skin, the microlevel multi‐stage "interlocked" configuration ionic skin is prepared by the bio‐template method, and an all‐in‐one tri‐modal pressure sensing wearable device was constructed by integrating thermoelectricity nanogenerator, piezoelectricity nanogenerator, and piezocapacitive sensing, which demonstrates the potential for addressing the issue of power supply and Internet of things applications. Skin‐like electronics research aiming to mimic even surpass human‐like specific tactile cognition by operating perception‐to‐cognition‐to‐feedback of stimulus to build intelligent cognition systems for certain imperceptible or inappreciable signals was so attractive. Herein, we constructed an all‐in‐one tri‐modal pressure sensing wearable device to address the issue of power supply by integrating multistage microstructured ionic skin (MM i‐skin) and thermoelectric self‐power staffs, which exhibits high sensitivity simultaneously. The MM i‐skin with multi‐stage "interlocked" configurations achieved precise recognition of subtle signals, where the sensitivity reached up to 3.95 kPa−1, as well as response time of 46 ms, cyclic stability (over 1500 cycles), a wide detection range of 0–200 kPa. Furthermore, we developed the thermoelectricity nanogenerator, piezoelectricity nanogenerator, and piezocapacitive sensing as an integrated tri‐modal pressure sensing, denoted as P‐iskin, T‐iskin, and C‐iskin, respectively. This multifunctional ionic skin enables real‐time monitoring of weak body signals, rehab guidance, and robotic motion recognition, demonstrating potential for Internet of things (IoT) applications involving the artificial intelligence‐motivated sapiential healthcare Internet (SHI) and widely distributed human‐machine interaction (HMI).

materials science, multidisciplinary
Multimodal integrated flexible electronic skin for physiological perception and contactless kinematics pattern recognition

Guomin Ye,Taosha Jin,Xueke Wang,Yi Chen,Qiang Wu,Yanfen Wan,Peng Yang

DOI: https://doi.org/10.1016/j.nanoen.2023.108580

IF: 17.6

2023-06-12

Nano Energy

Abstract:Multimodal integrated flexible electronic skin offers exceptional processing capability and versatility in various application scenarios. Researchers are devoting to developing nanomaterials or nano-devices with multidisciplinary functions. Herein, a trinary-mode integrated flexible electronic skin (E-Skin) was designed for physiological perception and contactless kinematics pattern recognition, which serves as real-time health monitor, electrode patch and contactless sensor. The composite film of liquid metal particles and thermoplastic polyurethane elastomers () was prepared by a combination of electrostatic spinning, electrostatic spraying, and knife coating, which can be stretched up to 404.7 % at stress of 1Mpa. The film was endowed three functional modes through different forms of encapsulation, which allows for (1) detecting human arthrosis movements, muscle stretching, and inspiration, (2) achieving a real-time capture of Electrocardiogram (ECG) and surface electromyography (sEMG), and a Human-Machine Interaction (HMI) system for game control based on sEMG signals was also developed, (3) a contactless sensor combining with a machine learning model which realizes the recognition of human motion patterns with a receiver operating characteristic curve and area under curve score (ROC-AUC-score) of 0.99. The three models of this E-Skin highlight the significant potential for industrialization in various fields, such as HMI, physiological perception, virtual reality, and motion analysis.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Wearable Pressure Sensors Based on MXene/Tissue Papers for Wireless Human Health Monitoring

Li Yang,Hongli Wang,Wenjing Yuan,Yuhang Li,Peng Gao,Naveen Tiwari,Xue Chen,Zihan Wang,Guangyu Niu,Huanyu Cheng

DOI: https://doi.org/10.1021/acsami.1c22001

2021-12-13

Abstract:Though the widely available, low-cost, and disposable papers have been explored in flexible paper-based pressure sensors, it is still difficult for them to simultaneously achieve ultrahigh sensitivity, low limit and broad range of detection, and high-pressure resolution. Herein, we demonstrate a novel flexible paper-based pressure sensing platform that features the MXene-coated tissue paper (MTP) sandwiched between a polyimide encapsulation layer and a printing paper with interdigital electrodes. After replacing the polyimide with weighing paper in the MTP pressure sensor, the silver interdigital electrodes can be recycled through incineration. The resulting pressure sensor with polyimide or paper encapsulation exhibits a high sensitivity of 509.5 or 344.0 kPa<sup>-1</sup>, a low limit (∼1 Pa) and a broad range (100 kPa) of detection, and outstanding stability over 10 000 loading/unloading cycles. With ultrahigh sensitivity over a wide pressure range, the flexible pressure sensor can monitor various physiological signals and human movements. Configuring the pressure sensors into an array layout results in a smart artificial electronic skin to recognize the spatial pressure distribution. The flexible pressure sensor can also be integrated with signal processing and wireless communication modules on a face mask as a remote respiration monitoring system to wirelessly detect various respiration conditions and respiratory abnormalities for early self-identification of opioid overdose, pulmonary fibrosis, and other cardiopulmonary diseases.

materials science, multidisciplinary,nanoscience & nanotechnology
Multi-attribute wearable pressure sensor based on multilayered modulation with high constant sensitivity over a wide range

Ning Li,Song Gao,Yang Li,Jianwen Liu,Wenhao Song,Guozhen Shen

DOI: https://doi.org/10.1007/s12274-022-5371-6

IF: 9.9

2023-02-17

Nano Research

Abstract:Flexible pressure sensors capable of monitoring diverse physiological signals and body movements have garnered tremendous attention in wearable electronic devices. Thereinto, high constant sensitivity over a wide pressure range combined with breathability, biocompatibility, and biodegradability is pivotal for manufacturing of reliable pressure sensors in practical sensing applications. In this work, inspired by the multilayered structure of skin epidermis, we propose and demonstrate a multi-attribute wearable piezoresistive pressure sensor consisting of multilayered gradient conductive poly(ε-caprolactone) nanofiber membranes composites. In response to externally applied pressure, a layer-by-layer current path is activated inside the multilayered membranes composites, leading to the most salient sensing performance of high constant sensitivity of 33.955 kPa −1 within the pressure range of 0–80 kPa. The proposed pressure sensor also exhibits a fast response—relaxation time, a low detection limit, and excellent stability, which can be successfully used to measure human physiological signals. Lastly, an integrated sensor array system that can locate objects' positions is constructed and applied to simulate sitting posture monitoring. These results indicate that the proposed pressure sensor holds great potential in health monitoring and wearable electronic devices.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Multifunctional skin-compliant wearable sensors for monitoring human condition applications

Geetika Maddirala,Thomas Searle,Xiao Wang,Gursel Alici,Vitor Sencadas

DOI: https://doi.org/10.1016/j.apmt.2021.101361

IF: 8.663

2022-03-01

Applied Materials Today

Abstract:Wearable sensors and devices capable of simulating human somatosensation are highly desirable to develop the next generation of electronic skins (e-skins), human-machine interfaces, and soft robotics. Herein, the design of flexible and skin-compliant capacitive pressure sensors for monitoring human motion and physiological signals by electrical signal conversion is reported. The introduction of air chambers into elastomeric polydimethylsiloxane (PDMS) substrate led to the development of pressure sensors with high sensitivity (0.82 kPa−1, up to 20% strain), capable of detecting both static and dynamic mechanical stimuli (17 nm/s), with a low Limit of Detection (LOD) of 1 Pa. Furthermore, the pressure sensors present an ultra-fast rise time (31.2 ms) and bandwidth (11.2 Hz), negligible hysteresis, and excellent cycling stability (> 10,000 cycles). Successful monitoring of human movement (e.g., arms bending), haptics, and physiological signals like heart and respiratory rates, demonstrate the potential of these sensors for wearable biosensing applications.

materials science, multidisciplinary
Skin-Inspired Pressure Sensor with MXene/P(VDF-TrFE-CFE) as Active Layer for Wearable Electronics

Xiao-Quan Shen,Ming-Ding Li,Jun-Peng Ma,Qun-Dong Shen

DOI: https://doi.org/10.3390/nano11030716

IF: 5.3

2021-03-12

Nanomaterials

Abstract:Multi-functional electronic skin is of paramount significance for wearable electronics in health monitoring, medical analysis, and human-machine interfacing systems. In order to achieve the function of natural skin, mechanical sensing with high sensitivity is an important feature of electronic skin. Inspired by the spinosum structure under the skin, herein, we fabricate a new capacitive pressure sensor with two-dimensional transition-metal carbides and nitrides (MXene) and ferroelectric polymer (P(VDF-TrFE-CFE)) as an active layer and micropatterned Cr-Au deposited on polydimethylsiloxane as flexible electrodes. Such a method is facile, effective, easily operated, and low-cost. The device design provides great capacitive change as a consequence of large deformation under pressure. Benefiting from the randomly distributed microstructure and high dielectric constant of the active layer, the device demonstrates high sensitivity with great linearity (16.0 kPa−1 for less than 10 kPa), that is, a low detection limit of 8.9 Pa, and quick response. A series of dynamic physiological signals, including typing, knuckle motion, and voice recognition can be facilely detected, making it a competitive candidate in the field of wearable electronics.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry

In Premises Positioning - Fuzzy Logic

Battery‐Free and Wireless Epidermal Electrochemical System with All‐Printed Stretchable Electrode Array for Multiplexed in Situ Sweat Analysis

Crosstalk-free Hybrid Integrated Multimodal Sensor for Human Temperature, Humidity, and Pressure Monitoring

An Integrated Stretchable Sensing Patch for Simultaneously Monitoring of Physiological and Biochemical Parameters

Smart MXene-based Bioelectronic Devices as Wearable Self-powered Health Monitor for Sensing Human Physiological Signals

Smart MXene‐based Bioelectronic Devices As Wearable Health Monitor for Sensing Human Physiological Signals

A dual-mode wearable sensor with coupled ion and pressure sensing

Home-Made, Self-Powered, Skin-Attachable Sensing Platform for Diverse Vital Sign Monitoring

Integrated Blood Pressure-Chemical Sensing Epidermal Patch

An epidermal patch for the simultaneous monitoring of haemodynamic and metabolic biomarkers

Skin-Inspired Textile Electronics Enable Ultrasensitive Pressure Sensing

A facile and novel design of multifunctional electronic skin based on polydimethylsiloxane with micropillars for signal monitoring.

Skin-electrode iontronic interface for mechanosensing

Bioinspired, multifunctional dual-mode pressure sensors as electronic skin for decoding complex loading processes and human motions

Multimodal Pressure Sensor: Advancing Continuous Cardiovascular Monitoring through Synergistic Capacitive and Piezoresistive Sensing

Multistage Microstructured Ionic Skin for Real‐Time Vital Signs Monitoring and Human‐Machine Interaction

Multimodal integrated flexible electronic skin for physiological perception and contactless kinematics pattern recognition

Wearable Pressure Sensors Based on MXene/Tissue Papers for Wireless Human Health Monitoring

Multi-attribute wearable pressure sensor based on multilayered modulation with high constant sensitivity over a wide range

Multifunctional skin-compliant wearable sensors for monitoring human condition applications

Skin-Inspired Pressure Sensor with MXene/P(VDF-TrFE-CFE) as Active Layer for Wearable Electronics