Abstract:Textile industries contribute to water pollution through synthetic dye discharge. This study explores the use of natural bio-coagulants to remove acid dyes from wastewater, investigating factors like pH, coagulant dose, dye concentration, contact time, and temperature for optimal results. The optimum pH and coagulants capabilities of (CAAPP, CAAPH, CBAGL, CBAPP and CBAPH) were 3 (49.6 mg/g), 3 (42.5 mg/g), 3 (38.9 mg/g), 4 (35.7 mg/g), 4 (34.1 mg/g), and 4 (29.4 mg/g) respectively, while treating of selected BRF-221 dyes from water solution. The acidic range (3-4) was found to have the best pH for the maximal coagulation, and the optimal dose were found to be 0.05 g/50 mL. The equilibrium was attained within 45-60 min for all coagulants. After 60 min of shaking, the maximum coagulation capacities (21.9, 21.02, 16.5, 27.9, 25.3, and 23.4 mg/g) of several coagulant composites (CAAGL, CAAPP, CAAPH, CBAGL, CBAPP, CBAPH) were determined. The initial BRF-221 dye concentration in the range of 10-200 mg/L was considered as optimum for gaiting maximum elimination of dye using different coagulants. At a dye value of 100 mg/L of BRF-221, maximal coagulation capacities CAAGL (179.19 mg/g), CAAPP (166.06 mg/g), CAAPH (141.60 mg/g), and CBAGL (126.49 mg/g), CBAPP (113.9 mg/g), CBAPH (93.08 mg/g) were attained. The study found 35 °C to be the optimal temperature for maximum acid dye removal using bio-coagulants. Increasing temperature reduced coagulation capacity, indicating an exothermic process. Freundlich and Langmuir isotherms showed suitability for pseudo-first-order and pseudo-second-order kinetics in biosorption. Thermodynamic parameters were assessed for process feasibility. Effective coagulants demonstrated sensitivity to electrolyte variations. In column studies, adjusting parameters achieved maximum coagulation efficiency for removing BRF-221 dyes. The study successfully applied optimal parameters to remove real textile effluents at a practical scale. SEM, FT-IR, BET and XRD characterized coagulants, providing insights into stability and morphology.

Optimized Use of Ferric Chloride and Sesbania Seed Gum (SSG) as Sustainable Coagulant Aid for Turbidity Reduction in Drinking Water Treatment

Utilization of citrus microcarpa peels and papaya seeds as a natural coagulant for turbidity removal

Evaluation of Annona diversifolia Seed Extract as A Natural Coagulant for Water Treatment

Optimization of Coagulation to Remove Turbidity from Surface Water Using Novel Nature-Based Plant Coagulant and Response Surface Methodology

Cassia fistula seeds as a natural coagulant for turbidity reduction: efficacy and optimization via central composite design

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Application of grape seed and Austrocylindropuntia mucilage for the simultaneous removal of azo dye and turbidity from synthetic wastewater: Optimizing experimental conditions using Box-Behnken Design (BBD)

Novel Covalently Bound Organic Silicon-Ferrum Hybrid Coagulant with Excellent Coagulation Performance and Bacteriostatic Ability

Facile synthesis of composite polyferric magnesium–silicate–sulfate coagulant with enhanced performance in water and wastewater

Removal of Arsenic Oxyanions from Water by Ferric Chloride—Optimization of Process Conditions and Implications for Improving Coagulation Performance

Optimization of Quartz Sand-Enhanced Coagulation for Sewage Treatment by Response Surface Methodology

Dosing low-level ferrous iron in coagulation enhances the removal of micropollutants, chlorite and chlorate during advanced water treatment

Parametric study of coagulant recovery from water treatment sludge towards water circular economy

Novel Cationic and Amphoteric Starch-Modified Coagulants for Efficient Treatment of Relatively High Turbidity and Large Organic Matter Source Waters: Performance, Predictive Modeling and Mechanism Analysis

Efficiency of FeSO4.7H2O as a Coagulant on Chromium Hexavalent Removal Using Coagulation-Flocculation Process: Optimization Using Response Surface Methodology

Developing Cost-Effective and Efficient Drinking Water Treatment Technology for the Removal of Salinity and Suspended Solids

Coagulation-Flocculation of Aquaculture Wastewater Using Green Coagulant from Garcinia kola Seeds: Parametric Studies, Kinetic Modelling and Cost Analysis

Evaluation of plant-based coagulants for turbidity removal and coagulant dosage prediction using machine learning

An enhanced coagulation using ferric chloride and poly-ferric chloride coagulant assisted by polyamidine: Performance and mechanisms

Green hybrid coagulants for water treatment: An innovative approach using alum and bentonite clay combined with eco-friendly plant materials for batch and column adsorption

Optimized Coagulation on A Municipal Wastewater Treatment: Competitive and Synergetic Effect among Different Pollutants