Abstract:Additive manufacturing, particularly Wire Arc Additive Manufacturing (WAAM), provides numerous advantages for the production of near net shape components, since it combines a high productivity with a reduced material waste. It is of major interest when working with expensive materials such as titanium alloy Ti-6Al-4V, commonly used in aerospace. Due to high temperature gradients WAAM is very susceptible to high residual stresses and hence, distortion problems. In order to avoid extensive experimental parameter studies in the design phase to mitigate these issues, a process design based on numerical simulation is favourable. However, accurate estimations up to now necessitate the implementation of transient multi-physics models, which may not be effective when applied to large structures because of their associated large computational time. Consequently, there is a clear need for faster numerical models, especially when path planning optimization is targeted. A promising very fast approach to solve this problem is the so-called inherent strain formulation. However, the original inherent strain formulation is hard to implement in certain commercial finite element (FE) software packages, since strain data is harder to access than stress data. In addition, the original approach requires the modification of the FE solver itself, and hence needs to be adapted for each FE analysis software package individually, which is not only inefficient but might lead also to different results. To overcome these issues a more universally applicable and non-intrusive incremental Inherent Stress formulation that can be incorporated to any commercial finite element solver has been developed within this work. Within the modelling approach the additive manufacturing of a representative component is simulated bead by bead, with the addition of each new bead corresponding to a linear elastic problem that can be rapidly solved. Furthermore, the model incorporates the temperature dependency of the Young's modulus during heating and cooling cycles to better account for thermo-mechanical coupling. Evolution of inherent stress during the deposition of successive layers is also introduced to increase the fidelity of the model. The validity of the model was assessed using two stiffened representative geometries with different complexity. In both cases, a major reduction in computational up to 98 % is observed, with a corresponding displacement error of 20 % in the worst-case scenario, thus constituting an interesting tool to evaluate distortion trends.

Geometric distortion-compensation via transient numerical simulation for directed energy deposition additive manufacturing

Process Optimization and Distortion Prediction in Directed Energy Deposition

Support Equilibrium Design for Laser Additive Manufacturing of Lightweight Component Based on Geometric Deformation Minimization

An Inherent Strain Method Using Progressive Element Activation for Fast Distortion Calculation in Directed Energy Deposition

Fast Distortion Prediction in Directed Energy Deposition Using Inversely-Identified Inherent Strains

Advances in additive manufacturing process simulation: Residual stresses and distortion predictions in complex metallic components

Predicting part distortion field in additive manufacturing: a data-driven framework

Residual stress and distortion of rectangular and S-shaped Ti-6Al-4V parts by Directed Energy Deposition: Modelling and experimental calibration

In-situ Observation and Numerical Simulation on the Transient Strain and Distortion Prediction During Additive Manufacturing

Development of Efficient Distortion Prediction Numerical Method for Laser Additive Manufactured Parts

Computed tomography as distortion mitigation method for selective laser sintering mass production

FAST COMPUTATION OF THERMAL FIELD OF DIRECT METAL DEPOSITION: A PRELIMINARY STUDY BASED ON QUIET ELEMENT METHOD

Effect of Thermal Deformation on Part Errors in Metal Powder Based Additive Manufacturing Processes

Incremental inherent stress model for the fast prediction of part distortion made via wire arc additive manufacturing

Numerical Simulation Development and Computational Optimization for Directed Energy Deposition Additive Manufacturing Process

Assessment of geometrical defects caused by thermal distortions in laser-beam-melting additive manufacturing: a simulation approach

Impact of Boundary Parameters Accuracy on Modeling of Directed Energy Deposition Thermal Field

A new variant of the inherent strain method for the prediction of distortion in powder bed fusion additive manufacturing processes

The role of tool path on microstructure uniformity in large-format additive manufacturing: integrated thermo-metallurgical-mechanical approach

Substrate Design-Based Control of the Residual Distortion in Directed Energy Deposition Additive Manufacturing

Laser-Particle Interaction-Based Analysis Of Powder Particle Effects On Temperatures And Distortions In Directed Energy Deposition Additive Manufacturing