Abstract:Additive manufacturing (AM) is known to generate large magnitudes of residual stresses (RS) within builds due to steep and localized thermal gradients. In the current state of commercial AM technology, manufacturers generally perform heat treatments in effort to reduce the generated RS and its detrimental effects on part distortion and in-service failure. Computational models that effectively simulate the deposition process can provide valuable insights to improve RS distributions. Accordingly, it is common to employ Computational fluid dynamics (CFD) models or finite element (FE) models. While CFD can predict geometric and thermal-fluid behavior, it cannot predict the structural response (e.g., stress–strain) behavior. On the other hand, an FE model can predict mechanical behavior, but it lacks the ability to predict geometric and fluid behavior. Thus, an effectively integrated thermofluidic-thermomechanical modeling framework that exploits the benefits of both techniques while avoiding their respective limitations can offer valuable predictive capability for AM processes. In contrast to previously published efforts, the work herein describes a one-way coupled CFD-FEA framework that abandons major simplifying assumptions, such as geometric steady-state conditions, the absence of material plasticity, and the lack of detailed RS evolution/accumulation during deposition, as well as insufficient validation of results. The presented framework is demonstrated for a directed energy deposition (DED) process, and experiments are performed to validate the predicted geometry and RS profile. Both single- and double-layer stainless steel 316L builds are considered. Geometric data is acquired via 3D optical surface scans and X-ray micro-computed tomography, and residual stress is measured using neutron diffraction (ND). Comparisons between the simulations and measurements reveal that the described CFD-FEA framework is effective in capturing the coupled thermomechanical and thermofluidic behaviors of the DED process. The methodology presented is extensible to other metal AM processes, including power bed fusion and wire-feed-based AM.

The role of tool path on microstructure uniformity in large-format additive manufacturing: integrated thermo-metallurgical-mechanical approach

Optimization of Tool-Path Generation for Material Extrusion-Based Additive Manufacturing Technology

FAST COMPUTATION OF THERMAL FIELD OF DIRECT METAL DEPOSITION: A PRELIMINARY STUDY BASED ON QUIET ELEMENT METHOD

Mitigation of Residual Stresses and Microstructure Homogenization in Directed Energy Deposition Processes.

Analysis of thermal cycles during DED-Arc of high-strength low-alloy steel and microstructural evolution

Temporally continuous thermofluidic-thermomechanical modeling framework for metal additive manufacturing

Residual stress and distortion of rectangular and S-shaped Ti-6Al-4V parts by Directed Energy Deposition: Modelling and experimental calibration

Numerical Simulation Development and Computational Optimization for Directed Energy Deposition Additive Manufacturing Process

Process Optimization and Distortion Prediction in Directed Energy Deposition

Advances in additive manufacturing process simulation: Residual stresses and distortion predictions in complex metallic components

In situ and Operando X-ray Imaging of Directed Energy Deposition Additive Manufacturing

Predicting Part-Level Thermal History in Metal Additive Manufacturing Using Graph Theory: Experimental Validation With Directed Energy Deposition of Titanium Alloy Parts

Comprehensive Studies of SS316L/IN718 Functionally Gradient Material Fabricated with Directed Energy Deposition: Multi-physics & Multi-Materials Modelling and Experimental Validation

Developing the AM G-code based thermomechanical finite element platform for the analysis of thermal deformation and stress in metal additive manufacturing process

Temperature and residual stress distribution of FGM parts by DED process: modeling and experimental validation

IoT-Based Data Mining Framework for Stability Assessment of the Laser-Directed Energy Deposition Process

Additive manufacturing: Application and validation of machine learning-based process-structure-property linkages in Ti-6Al-4V

Multiscale microstructural heterogeneity and mechanical property scatter in Inconel 718 produced by directed energy deposition

Geometry-based decomposition rules and programming strategies for complex components in additive and hybrid manufacturing

Heat Source Modeling and Residual Stress Analysis for Metal Directed Energy Deposition Additive Manufacturing

Effect of Path Strategy on Residual Stress and Distortion in Laser and Cold Metal Transfer Hybrid Additive Manufacturing