Abstract:The AC impedance response of mixed ionic and electronic conductors (MIECs) exposed to a chemical potential gradient is derived from first principles. In such a system, the chemical potential gradient induces a gradient in the carrier concentration. For the particular system considered, 15% samarium doped ceria (SDC15) with Ba(0.5)Sr(0.5)Co(0.8)Fe(0.2)O(3-delta) (BSCF) and Pt electrodes, the oxygen vacancy concentration is a constant under the experimental conditions and it is the electron concentration that varies. The resulting equations are mapped to an equivalent circuit that bears some resemblance to recently discussed equivalent circuit models for MIECs under uniform chemical potential conditions, but differs in that active elements, specifically, voltage-controlled current sources, occur. It is shown that from a combination of open circuit voltage measurements and AC impedance spectroscopy, it is possible to use this model to determine the oxygen partial pressure drop that occurs between the gas phase in the electrode chambers and the electrode|electrolyte interface, as well as the interfacial polarization resistance. As discussed in detail, this resistance corresponds to the slope of the interfacial polarization curve. Measurements were carried out at temperatures between 550 and 650 degrees C and oxygen partial pressure at the Pt anode ranging from 10(-29) to 10(-24) atm (attained using H(2)/H(2)O/Ar mixtures), while the cathode was exposed to either synthetic air or neat oxygen. The oxygen partial pressure drop at the anode was typically about five orders of magnitude, whereas that at the cathode was about 0.1 atm for measurements using air. Accordingly, the poor activity of the anode is responsible for a loss in open circuit voltage of about 0.22 V, whereas the cathode is responsible for only about 0.01 V, reflecting the high activity of BSCF for oxygen electro-reduction. The interfacial polarization resistance at the anode displayed dependences on oxygen partial pressure and on temperature that mimic those of the electronic resistivity of SDC15. This behavior is consistent with hydrogen electro-oxidation occurring directly on the ceria surface and electron migration being the rate-limiting step. However, the equivalent resistance implied by the oxygen partial pressure drop across the anode displayed slightly different behavior, possibly indicative of a more complex reaction pathway.

Determination of Oxygen Diffusion and Surface Exchange Coefficients of Mixed Ionic-Electronic Conductors by Oxygen Semi-Permeation Methods

A New Method to Measure Oxygen Surface Exchange Kinetics On Porous Mixed Conducting Oxides With Simple Determination of Microstructure Parameters

Oxygen Transport Kinetics of Mixed Ionic-Electronic Conductors by Coupling Focused Ion Beam Tomography and Electrochemical Impedance Spectroscopy

Mixed Oxygen Ionic and Electronic Conduction in Cafe0.2t0.8o3-Delta: A Combined Oxygen Permeation and Electrical Conductivity Study

Oxygen exchange kinetics of mixed conducting oxide ceramics covered by dendritic surface particles

In-Depth Understanding of Oxygen Transfer in the Catalyst Layer of High-Temperature Proton Exchange Membrane Fuel Cells

Design of Mixed Ionic-Electronic Materials for Permselective Membranes and Solid Oxide Fuel Cells Based on Their Oxygen and Hydrogen Mobility

Analyzing the dependence of oxygen incorporation current density on overpotential and oxygen partial pressure in mixed conducting oxide electrodes.

Determination of Surface Exchange Coefficients of LSM, LSCF, YSZ, GDC Constituent Materials in Composite SOFC Cathodes

Surface Exchange Coefficients of Composite Cathode Materials Using In Situ Isothermal Isotope Exchange

Influence of Electrode Potential on Oxygen Mobility Probed by Polarized Isotopic Exchange in Solid Oxide Electrolyser Cells: Insights for Electro‐Assisted Oxidation Reactions

The oxygen reduction reaction in solid oxide fuel cells: from kinetic parameters measurements to electrode design

Electrical conduction and oxygen transport in SrFeCo0.5Ox oxide membranes

Review: Measurement of partial electrical conductivities and transport numbers of mixed ionic-electronic conducting oxides

Determination of Kinetic Parameters and Identification of the Rate-Determining Steps in the Oxygen Exchange Process for LaNi0.6Fe0.4O3- δ

Temperature and oxygen adsorption coupling effects upon the surface tension of liquid metals

Electrochemical impedance spectroscopy of mixed conductors under a chemical potential gradient: a case study of Pt|SDC|BSCF

Mass Transport in Oxide Thin Films - Visualization and Control

Detailed description of pulse isotopic exchange method for analyzing oxygen surface exchange behavior on oxide ion conductors

Oxygen Exchange Kinetics on a Highly Oriented La0.5Sr0.5CoO3−δ Thin Film Prepared by Pulsed-Laser Deposition

Surface Enhancement of Oxygen Exchange and Diffusion in the Ionic Conductor La2mo2o9