Abstract:Protonic ceramic electrolysis cells (PCECs) have been attracting attention due to their ability to operate in the intermediate temperature (300 - 500 ̊C) sweet-spot. These temperatures enable fast kinetics, inexpensive materials (no precious metals; stainless interconnects), and lower operating voltage for producing green hydrogen, without the accelerated degradation that may be observed at higher temperatures. The steam electrodes often support triple conduction and thereby host the proton exchange / oxygen evolution process at the surface, where steam is split. Steam electrode materials development is at a relatively early stage, with open questions around the relationships among bulk composition, evolving surface chemistry, kinetic quantities, and degradation mechanisms. We are investigating the proton exchange surface coefficient ( k ) and its evolution over time on model thin film electrodes in order to ultimately develop highly active and long-term stable steam electrodes for PCECs. ABO 3 perovskites with Ba on the A-site and nominally multivalent ions on the B-site are candidates for steam electrodes given the varied compositions in this class that can transport oxide ions, protons, and electronic species, and the lowering of hydration enthalpies by the basicity introduced by Ba. However, very few measurements of k exist for these materials, and the evolution of surface chemistry and thus k is poorly understood. In this work, we fabricated and compared two perovskite triple conducting oxides by growing geometrically well-defined films of Ba(Pr,Y)O 3-x (BPY) and Ba(Co,Fe,Zr,Y)O 3-x (BCFZY) with pulsed laser deposition. We examined the proton surface exchange coefficients ( k -values) using simultaneous in-situ optical transmission relaxation and electrical conductivity relaxation measurements upon switching pH 2 O at a temperature of 400 ̊C, and continued these switches as a function of time to assess stability. To our knowledge, this is the first use of an optical transmission method to probe elevated temperature steam splitting kinetics, and we interpret the optical (and electrical) changes as indicative of redox during the hydrogenation process. The k -values of BPY thin films were approximately ten times higher than those of the BCFZY thin films, and BPY also retained higher k -values over time. The bulk and surface chemical compositions of BPY and BCFZY thin films before and after relaxation measurements were compared using Rutherford backscattering spectrometry, angle-resolved X-ray photoelectron spectroscopy, and scanning transmission electron microscopy with spectroscopy. Pronounced Ba enrichment and Si contamination (from the quartz tube) were evident at the surface of BPY by both S/TEM-EDS and XPS, whereas for BCFZY these surface chemical features were only detectable by XPS and absent in S/TEM-EDS. Implications for materials design of steam electrodes will be discussed, considering efficiency and lifetime.

Detailed description of pulse isotopic exchange method for analyzing oxygen surface exchange behavior on oxide ion conductors

A New Method to Measure Oxygen Surface Exchange Kinetics On Porous Mixed Conducting Oxides With Simple Determination of Microstructure Parameters

Determination of Surface Exchange Coefficients of LSM, LSCF, YSZ, GDC Constituent Materials in Composite SOFC Cathodes

Surface Exchange Coefficients of Composite Cathode Materials Using In Situ Isothermal Isotope Exchange

Oxygen Exchange Kinetics on a Highly Oriented La0.5Sr0.5CoO3−δ Thin Film Prepared by Pulsed-Laser Deposition

The oxygen reduction reaction in solid oxide fuel cells: from kinetic parameters measurements to electrode design

(Invited) Proton Surface Exchange Kinetics and Stability of Thin-Film Triple Conducting Oxides for Protonic Ceramic Electrolysis Cells

Oxygen Exchange on a Highly Oriented Thin Film Electrode

Surface chemistry and porosity engineering through etching reveal ultrafast oxygen reduction kinetics below 400 °C in B-site exposed (La,Sr)(Co,Fe)O3 thin-films

Oxygen Transport Kinetics of Mixed Ionic-Electronic Conductors by Coupling Focused Ion Beam Tomography and Electrochemical Impedance Spectroscopy

Determination of Kinetic Parameters and Identification of the Rate-Determining Steps in the Oxygen Exchange Process for LaNi0.6Fe0.4O3- δ

Study of oxygen exchange in Mo-doped strontium ferrite

Enhanced oxygen exchange kinetics and long-term stability of Ruddlesden-Popper phase Pr4Ni3O10+δ cathode for solid oxide fuel cells

Surface Enhancement of Oxygen Exchange and Diffusion in the Ionic Conductor La2mo2o9

Oxygen Exchange in MIEC Perovskite Oxide La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3−δ : Kinetic and Equilibrium Parameters and Their Interrelation

Ultrafast Oxygen Exchange Kinetics On Highly Epitaxial Prbaco2o5+Delta Thin Films

Isotope Exchange Raman Spectroscopy (IERS): a novel technique to probe physicochemical processes $in$ $situ$

Real time observation of oxygen diffusion in CGO thin films using spatially resolved Isotope Exchange Raman Spectroscopy

Solid Electrolyte Coulometric Studies of Oxide State and Kinetics

Electrode kinetics at the Pt, O2|La0.9Sr0.1ScO3-δ interface

Studying Surface Chemistry of Mixed Conducting Perovskite Oxide Electrodes with Synchrotron-Based Soft X-rays