Abstract:The production of advanced biofuels represents a near-term opportunity to decarbonize the heavy vehicle transportation sector. However, important barriers must be overcome and successful deployment of these technologies will require (i) catalyst and process development to reduce cost and improve carbon utilization and (ii) industry-relevant validation of operability to de-risk scale-up. Herein, we seek to address these challenges for an integrated two-step process involving catalytic fast pyrolysis (CFP) followed by co-hydrotreating of bio-oil with refinery streams. Technoeconomic and lifecycle analysis based on the data presented herein reveal the potential to generate low-carbon transportation fuels and chemical co-products with a modelled selling price of ) and a 78% reduction in greenhouse gas emissions compared to fossil-based pathways. The feedstock for this research was a blend of 50 wt% loblolly pine and 50 wt% waste forest residues, and the CFP step was performed using an ex situ fixed bed of Pt/TiO 2 with co-fed H 2 at atmospheric pressure. Compared to previous state-of-technology benchmarks, advancements in catalyst design and synthesis methodology enabled a 4x reduction in Pt loading and a 4x increase in time on stream without negatively impacting upgrading performance. Additionally, a first-of-its-kind integrated assessment of waste gas adsorption showed near quantitative recovery of acetone and 2-butanone, which collectively represent approximately 5% of the biomass carbon. The valorization of these co-products opens opportunities to support decarbonization of the chemical sector while simultaneously improving the overall process carbon efficiency to > 40%. After condensation, the CFP-oil was co-hydrotreated with straight run diesel (10:90 vol%) to achieve 95% biogenic carbon incorporation. The oxygen content of the hydrotreated oil was below detection limits, and the diesel fraction exhibited a cetane number and cloud point suitable for a finished fuel. This manuscript concludes by highlighting remaining research needs associated with improving thermal management during catalyst regeneration, mitigating catalyst deactivation due to inorganic deposition, and demonstrating durability of biomass feeding systems when operated in hydrogen-rich environments.

Synthesis of an oxygenated fuel additive from a waste biomass derived aldehyde using a green catalyst: an experimental and DFT study

Synthesis of Fuel Additives via Esterification of Succinic Acid over a Sustainable Catalyst Comprising 12-Tungstophosphoric Acid Anchored to Zeolite HY

Green hydrocarbons fuel production from agricultural waste biomass in the presence of a novel heterogeneous catalyst

Valorizing biomass waste glycerol to fuel additive at room temperature using a nanostructured WO3/Nb2O5 catalyst

Advances in Upgrading Biomass to Biofuels and Oxygenated Fuel Additives Using Metal Oxide Catalysts

Biomass-Modified Zirconium-Based Catalyst for One-Pot Reductive Etherification of Bioderived Aldehydes to Furanic Diether

From feedstocks to FAME: enhancing synthesis efficiency with basic ionic liquids

Synthesis of high-grade Jet fuel blending precursors by aldol condensation of lignocellulosic ketones using HfTPA/MCM-41 with strong acids and enhanced stability

Catalytic Valorization of Sugarcane Bagasse to Chemicals and Aviation Fuel Precursors

Sulphonated biomass-based catalyst for solketal synthesis by acetalization of glycerol – A byproduct of biodiesel production

Green fuel production from waste fried sunflower oil using reusable mesoporous COP-KOH catalyst with a kinetic study

Highly Selective Upgrading of Biomass-Derived Alcohol Mixtures for Jet/Diesel-Fuel Components.

Biomass Residues Purification: Elimination of Oxygen from Oxolane and its Monomethylated Derivatives through Hydrodeoxygenation Process

Solvent-free dehydration, cyclization, and hydrogenation of linalool with a dual heterogeneous catalyst system to generate a high-performance sustainable aviation fuel

Condensation/Hydrogenation of Biomass-Derived Oxygenates in Water/Oil Emulsions Stabilized by Nanohybrid Catalysts

Catalytic Dimerization of Bio-Based 5-methylfurfuryl Alcohol to Bis(5-methylfuran-2-yl) Methane with a Solid Acidic Nanohybrid

Advancements and challenges in the production of low-carbon fuels via catalytic fast pyrolysis of biomass through refinery integration and co-product generation

Green Catalytic Pyrolysis: An Eco-Friendly Route for the Production of Fuels and Chemicals by Blending Oil Industry Wastes and Waste Furniture Wood

Novel pathways for fuels and lubricants from biomass optimized using life-cycle greenhouse gas assessment

Catalytic Conversion of Biomass into Hydrocarbons over Noble‐Metal‐Free VO‐Substituted Potassium Salt of Phosphotungstic Acid

Synthesis of a green fuel additive over cation resins