Abstract:: The interfacial mass transfer characteristics of the gas-oil miscibility process are important in gas flooding technology to improve oil recovery. In this study, the process of gas flooding with actual components of Jilin oilfield is investigated by using molecular dynamics simulation method. We have chosen several alkane molecules based specifically on the actual components of crucial oil as the model oil phase for our study. The pressure of the gas phase is adjusted by changing the number of gas molecules while keeping the oil phase constant in the simulation. After the simulation, we analyze the variations of density in the gas-oil phase and interfacial characteristics to obtain the minimum miscibility pressure (MMP) for different displacement gases. The results show that the density of the gas phase increases while the density of the oil phase decreases with an increase in the displacement gas pressure, resulting in efficient mixing between the gas phase and the oil phase. At higher gas pressures, the thickness of the interface between the gas and oil phases is higher while the interfacial tension is lower. At the same time, we observed that the higher the CO 2 content in the displacement phase, the thicker the oil-gas interface becomes and the better the oil-gas mixing is under the same gas pressure. In this work, the gas-oil miscibility is studied with pure CO 2 , pure N 2 , and the mixture of these two gases, and it is found that the minimum miscibility pressure for pure CO 2 flooding (22.3 MPa) is much lower than that for pure N 2 flooding (119.0 MPa). When these two gases are mixed in 1 : 1 ratio, the MMP (50.7 MPa) is between the MMPs of the two pure gases. Moreover, the pressure required with CO 2 is lower than that required with N 2 to achieve the same displacement effect. Finally, we explain the mechanisms of the different miscibility processes for different gas pressure and different displacement gases from the perspective of the total energy of the system and the potential of the mean force between the gas and the oil. The total energy of the system increases with the pressure of the gas phase, implying that the number of collisions between the oil and gas molecules increases and the gas-oil miscibility is enhanced. In addition, by analyzing the potential of mean force profiles, it can be concluded that the force of attraction between the oil-phase molecules and CO 2 molecules is greater than that between the oil-phase molecules and N 2 molecules; thus, the CO 2 molecules easily mix with oil, and the effect of displacement is more obvious. These results are of great significance for understanding the interfacial mass transfer characteristics of the gas-oil miscibility process and for guiding the optimization and design of enhanced oil recovery technology by gas flooding.

Ketone Solvent to Reduce the Minimum Miscibility Pressure for CO2 Flooding at the South Sumatra Basin, Indonesia

Chemical-assisted minimum miscibility pressure reduction between oil and methane

Research and performance evaluation of CO2 solubilization synergist for heavy oil

Chemical strategies for enhancing CO 2 -Hydrocarbon miscibility

CO2 and Alkane Minimum Miscible Pressure Estimation by the Extrapolation of Interfacial Tension

Enhanced Solubility and Miscibility of CO2-Oil Mixture in the Presence of Propane under Reservoir Conditions to Improve Recovery Efficiency

Research on Minimum Miscible Pressure Between Crude Oil and Supercritical Carbon Dioxide System in Ultra-Low Permeability Reservoir by the Long-Slim-Tube Experiment Method

Research for reducing the Minimum Miscible Pressure of crude oil and carbon dioxide by injecting citric acid isobutyl ester

The experimental research for reducing the minimum miscibility pressure of carbon dioxide miscible flooding

Visualization of CO 2 -oil vanishing interface to determine minimum miscibility pressure using microfluidics

Application of Fatty Acid Methyl Ester from Biomass for CO2-Crude Oil MMP Reduction

The influence and mechanism of alkyl block polyethers on the interfacial tension and minimum miscibility pressure of CO 2 and shale oil

Vapor–Liquid Equilibrium Data for Binary Systems CO 2 + Acetone, Butanone, 2-Pentanone, and 3-Pentanone at 253.15 K: Experimental Measurements and Correlations

Minimum Miscibility Pressure of CO2/Hydrocarbon Systems Within Nanopores

Comprehensive Review of the Determination and Reduction of the Minimum Miscibility Pressure during CO 2 Flooding

Molecular insight into the interfacial microstructural and miscible behavior of CO 2 flooding in tight reservoir

Molecular insight into minimum miscibility pressure estimation of shale oil/CO 2 in organic nanopores using CO 2 huff-n-puff

Interfacial Mass Transfer Characteristics and Molecular Mechanism of the Gas-Oil Miscibility Process in Gas Flooding

CO2 Near-Miscible Flooding for Tight Oil Exploitation

The effects of nonionic surfactants on enhancing miscibility between oil and CO 2 : A molecular dynamics study

Experiment and Simulation Study of CO2 Solubility in Dimethyl Carbonate, 1-Octyl-3-methylimidazolium Tetrafluoroborate and Their Mixtures