Abstract:A micromixer is one of the most significant components in a microfluidic system. A three-dimensional micromixer was developed with advantages of high efficiency, simple fabrication, easy integration, and ease of mass production. The designed principle is based on the concepts of splitting–recombination and chaotic advection. A numerical model of this micromixer was established to characterize the mixing performance for different parameters. A critical Reynolds number (Re) was obtained from the simulation results. When the Re number is smaller than the critical value, the fluid mixing is mainly dependent on the mechanism of splitting–recombination, therefore, the length of the channel capable of complete mixing (complete mixing length) increases as the Re number increases. When the Re number is larger than the critical value, the fluid mixing is dominated by chaotic advection, and the complete mixing length decreases as the Re number increases. For normal fluids, a complete mixing length of 500 µm can be achieved at a very small Re number of 0.007 and increases to 2400 µm as the Re number increases to the critical value of 4.7. As the Re number keep increasing and passes the critical Re number, the complete mixing length continues to descend to 650 µm at the Re number of 66.7. For hard-to-mix fluids (generally referring to fluids with high viscosity and low diffusion coefficient, which are difficult to mix), even though no evidence of strong chaotic advection is presented in the simulation, the micromixer can still achieve a complete mixing length of 2550 µm. The mixing performance of the micromixer was also verified by experiments. The experimental results showed a consistent trend with the numerical simulation results, which both climb upward when the Re number is around 0.007 (flow rate of 0.03 μm/min) to around 10 (flow rate of 50 μm/min), then descend when the Re number is around 13.3 (flow rate of 60 µm/min).

A three-dimensional numerical investigation of an induced-charge electrokinetic micromixer equipped with fully polarizable particle

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

The mixing performance of the induced charge electroosmosis micromixer with conductive chamber edges for viscoelastic fluid

An Enhanced Electroosmotic Micromixer with an Efficient Asymmetric Lateral Structure.

Numerical study of a novel electroosmotic active micromixer with twin diamond-shaped chambers and sawteeth

Numerical Simulation of the Efficiency of Mixing in Heterogeneous Microchannels with Patterned Surface Potentials

Fast electrokinetic mixing in microflows with different electrical conductivities

Mixing performance of viscoelastic fluids in an induced charge electroosmotic micromixer with a conductive cylinder

A Three-Dimensional Micromixer Using Oblique Embedded Ridges

Numerical analysis of a microfluidic mixer and the effects of different cross-sections and various input angles on its mixing performance

Influence of Surface Heterogeneity on Electrokinetically Driven Microfluidic Mixing

Design and development of an efficient fluid mixing for 3D printed lab-on-a-chip

Numerical study of the vortex‐induced electroosmotic mixing of non‐Newtonian biofluids in a nonuniformly charged wavy microchannel: Effect of finite ion size

A New Micromixer with Helical Microchannel and Research on Its Numerical Flow Field

Numerical assessment of hydrodynamic and mixing characteristics for mixed electroosmotic and pressure-driven flow through a wavy microchannel with patchwise surface heterogeneity

Electrokinetic mixing at high zeta potentials: ionic size effects on cross stream diffusion

Numerical Investigation on a Chaotic Passive Micromixer Based on Square Chambers Connected with Different Channel Shapes for Enhancing the Mixing Process

Liquid Mixing Based on Electrokinetic Vortices Generated in a T-Type Microchannel

Numerical simulation of fluid mixing reinforcement in micro-mixers with barriers embedded

Analysis of Sequential Micromixing Driven by Sinusoidally Shaped Induced-Charge Electroosmotic Flow

Induced charge electro-osmotic mixing performance of viscoelastic fluids in microchannels with an electrically conductive plate