Crystal structure evolution of an energetic compound dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate induced by solvents

Xin Xu,Dong Chen,Hongzhen Li,Mi Yan,Ying Xiong,Haixia Zhao,Rong Xu

DOI: https://doi.org/10.1039/d0ra01182g

IF: 4.036

2020-01-01

RSC Advances

Abstract:Three new solvent compounds obtained by dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate recrystallized from three solvents.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Crystal Morphology of Dihydroxylammonium 5,5′-Bistetrazole-1,1′-diolate (TKX-50) under Solvents System with Different Polarity Using Molecular Dynamics

Fang Chen,Tao Zhou,Jun Li,Xiaolu Wang,Duanlin Cao,Jianlong Wang,Zejin Yang

DOI: https://doi.org/10.1016/j.commatsci.2019.05.060

IF: 3.572

2019-01-01

Computational Materials Science

Abstract:Dihydroxylammonium 5,5'-bistetrazole-1,1'-diolate (TKX-50) is a kind of promising energetic ionic salt which shows excellent properties including higher detonation velocity and lower mechanical sensitivities. In order to explain the influence of solvent on the morphology of TKX-50 crystal, the two-dimensional nucleation theory was used to modify the attachment energy (AE), molecular dynamics (MD) simulation was employed to investigate the interaction of TKX-50 and solvents. The results demonstrated that the morphologically dominant growth surfaces of TKX-50 in vacuum are (0 2 0), (1 0 0), (01 1), (1 1 0), (1 1 -1) and (1 2 -1), respectively. It had intramolecular and intermolecular hydrogen bonds with different strength in the TKX-50 crystal. The effect of solvent on the crystal plane was further explained through the analysis of radial distribution function (RDF) and mean square displacement (MSD). The morphologies of TKX-50 in solvents with different polarity were predicted, and an empirical correlation formula was fitted by comparing the aspect ratios (R) of the crystals, solvent polarity (P) and the root mean square values (I) of the solvent molecular diffusion coefficient. Results of comparing the TKX-50 crystal aspect ratios in different solvents indicated that the Ethylene Glycol (EG) solvent is more favorable for the spheroidization of TKX-50 in this study.
Preparation, Crystal Structure and Properties of a New Crystal Form of Diammonium 5,5′‐Bistetrazole‐1,1′‐diolate

Xiaojun Wang,Shaohua Jin,Chunyuan Zhang,Lijie Li,Shusen Chen,Qinghai Shu

DOI: https://doi.org/10.1002/cjoc.201500512

IF: 5.56

2015-01-01

Chinese Journal of Chemistry

Abstract:A new crystal form of diammonium 5,5-bistetrazole-1,1-diolate (1) was prepared by two novel methods and fully characterized by using IR, NMR spectroscopy, elementary analysis, single crystal X-ray crystallography and thermal gravity/differential thermal analysis (TG/DTA). Crystalline 1 was found as monoclinic and space group of P21/c (14). The TG/DTA analysis showed that the decomposition temperature of 1 was 287.8 degrees C with a mass loss of 91.2% in the range of 220-300 degrees C at a heating rate of 5 degrees C/min. The sensitivities test towards impact, friction of 1 indicated that 1 has much lower sensitivities than those of RDX/HMX and is comparable to those of TNT, which suggested that 1 could be used as a good candidate of new insensitive energetic compound.
A New Strategy to Design Isostructural Salts: the Case of the Antitumor Drug Dimethylaminomicheliolide

Zhonghua Li,Haibin Qu,Lan Fang,Songgu Wu,Junbo Gong

DOI: https://doi.org/10.1016/j.cclet.2022.05.018

2023-01-01

Abstract:Isostructural multicomponent crystals provide a promising way for fine-tuning physicochemical prop-erties,whereas their design remains quite challenging.The purpose of this work was to provide a new strategy for obtaining isostructural multicomponent crystals by introducing coformers with func-tional group positional isomerism.Five isostructural salts of an antitumor drug dimethylaminomicheli-olide(DMAMCL)were reported and designed with a series of dihydroxybenzoic acid regioisomers for the first time,which were identified by power and single-crystal X-ray diffractions.Similar lattice parame-ters suggested these obtained salts may have the same crystal packing mode.The quantitative similar-ity parameters via XPac,CrystalCMP and Mercury program further proved these crystal structures are 3D isostructural.Hirshfeld surface maps and 2D fingerprint plots show that the isostructural salts have similar intermolecular interactions.Compared with DMAMCL,obvious improvement was observed in the thermal stability,hygroscopicity,and solubility of these isostructural salts.Meanwhile,isostructural crys-tals may have different physicochemical properties,even though the shape and molecular size are similar and the packing of crystal structures is equally matched.
Morphology Prediction of 5,5′-Bistetrazole-1,1′-diolate (BTO) Crystal in Solvents with Different Models Using Molecular Dynamics Simulation

Tao Zhou,Fang Chen,Jun Li,Lei He,Yuanyuan Ren,Xiaolu Wang,Duanlin Cao,Jianlong Wang

DOI: https://doi.org/10.1016/j.jcrysgro.2020.125843

IF: 1.8

2020-01-01

Journal of Crystal Growth

Abstract:For explaining in detail the influence of solvents on the morphology of 5,5 '-bistetrazole-1,1 '-diolate (BTO) crystal, molecular dynamics (MD) methods were used to simulate solution-crystal interface interactions, modified attachment energy (AE) model and occupancy model were used to predict the morphology of BTO. The simulation results demonstrated that the morphologically dominant growth surfaces of BTO in vacuum are (001), (110), (20-1) and (200), respectively. There has many intramolecular and intermolecular interactions exist with different strength in the crystal of BTO, and the atomic system is dominated by N center dot center dot center dot H/H center dot center dot center dot N contacts which are comprising 60.2%. Analysis of the crystal bond chain and crystal packing further explained the mechanism of crystal surface growth. The size of the BTO crystal face-solvent model and the number of solvent molecules was designed. The morphologies of BTO in different solvents with three models were displayed. Results of comparing the BTO crystal relative surface/volume ratio in different solvents indicated that the Diethyl Ether (DEE) solvent is more favorable for the spheroidization of BTO crystal in the study.
Morphology prediction of dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate (TKX-50) crystal in different solvent systems using modified attachment energy model

Fang Chen,Tao Zhou,Lijie Li,Chongwei An,Jun Li,Duanlin Cao,Jianlong Wang

DOI: https://doi.org/10.1016/j.cjche.2022.02.008

IF: 3.8

2022-02-01

Chinese Journal of Chemical Engineering

Abstract:In order to theoretically study the growth morphology of dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate (TKX-50) crystal in different solvent systems, crystal–solvent models were established, and then molecular dynamics (MD) methods were adopted as a means to simulate particle motion. Modified attachment energy (MAE) model was employed to calculate the growth morphology of TKX-50. The simulation results demonstrate that COMPASS force field and RESP charge are suitable for molecular dynamics simulation of TKX-50. The morphologically dominant growth surfaces of TKX-50 in vacuum are (0 2 0), (0 1 1), (1 1 –1), (1 0 0) and (1 2 0), respectively. In water (H2O) and N, N-dimethylformamide (DMF) solvents, the (1 1 –1) face is the largest in the habit face, the growth rate of (0 2 0) face becomes faster. With the increase of temperature, the aspect ratios of TKX-50 crystal in DMF solvent increase, and the areas of the (1 2 0) faces decrease. In ethylene glycol /H2O mixed solvent system with volume ratio of 1/1, aspect ratio of TKX-50 is relatively small. In formic acid /H2O mixed solvents with different volume ratios (1/4, 1/3, 1/2, 1/1 and 2/1), aspect ratio of TKX-50 is relatively small when volume ratio is 1/2.

engineering, chemical
Solubilities of Dihydroxylammonium 5,5′-Bistetrazole-1,1′-diolate in Various Pure Solvents at Temperatures Between 293.15 and 323.15 K

Chunyuan Zhang,Shaohua Jin,Shusen Chen,Yan Zhang,Liang Qin,Xiaochun Wei,Qinghai Shu

DOI: https://doi.org/10.1021/acs.jced.6b00009

IF: 3.119

2016-01-01

Journal of Chemical & Engineering Data

Abstract:The solubility of newly insensitive energetic material dihydroxylammonium 5,5'-bis(tetrazole)-1,1'-diolate (TKX-50) was measured in ethyl acetate, ethanol, deionized water, dimethyl fumarate (DMF), formic acid, toluene, and dimethyl sulfoxide (DMSO) between 293.15 and 323.15 K at atmospheric pressure by the gravimetric method, which is increased with an increase of temperature. The order of the solubility is ethyl acetate < ethanol < toluene < deionized water < DMF < formic acid < DMSO. The experimental mole fraction solubility data were correlated with a simple Apleblat equation, showing a good fitting between the experimental data and Apleblat equation.
Solvent Control in the Formation of Supramolecular Solvates of 2,4-Diamino-6-methyl-1,3,5-triazine with 5-Nitroisophthalic Acid

Chao Chen,Kai Zhang,Cunrong Zhang,Peiqi Xing,Shuguang Xiang,Yu Yang,Lei Wang

DOI: https://doi.org/10.1007/s10870-018-0744-0

2018-01-01

Journal of Chemical Crystallography

Abstract:Crystal shapes can be affected by different solvents from sheet, rod, to block because they can enter into the crystal lattice and co-crystallize with the ligands from various instantaneous microenvironments. In this study, two new supramolecular solvates, formulated as [(C8H4NO6+)·(C4H8N5−)]·H2O (1) and [(C8H3NO62+)·(C4H8N5−)2]·CH3OH (2), were synthesized by the combination of 2,4-diamino-6-methyl-1,3,5-triazine (DAMT) and 5-nitroisophthalic acid (H2NIPA) from the solvent mixture of CH3COCH3–H2O/CH3OH–H2O, respectively. Interestingly, the structures of these two solvates contain both classical hydrogen bond N–H⋯O and heterosynthon \({\text{R}}_{2}^{2}\) (8). And due to the different solutions, the supramolecular aggregates led to different crystal structures and shapes. Structural analysis shows that the differences in the two solvate structures mainly attributed to the unique hydrogen bonding pattern between the dimers and solvents molecules. 1 and 2 were characterized by single crystal X-ray diffraction, element analysis, infrared radiation, and thermogravimetric analysis.
Synthesis,Crystal Structure and Properties of the Ammonia Salt of 5,5′-Bistetrazole-1,1′-diolate

WANG Xiao-jun,ZHANG Xiao-peng,SONG Lei,WANG Xia,JIN Shao-hua

DOI: https://doi.org/10.14077/j.issn.1007-7812.2015.04.008

2015-01-01

Abstract:The intermediate diazidoglyoxime(DAG)was synthesized by one-pot method with glyoxime and NaN3 as starting materials.Then 5,5′-bistetrazole-1,1′-diolate(BTO)was synthesized by reaction of DAG with HCl and Et2 O.The ammonia salt of 5,5′-bistetrazole-1,1′-diolate(ABTOX)was synthesized by metathesis reaction of BTO and NH4 Cl.Its structure was characterized by X-ray single crystal diffractometer.The thermolysis properties of ABTOX were studied by differential thermal analysis/thermogravimetric analysis(DTA/TG),and its impact sensitivity and friction sensitivity were also tested.Results show that the crystal is orthorhombic belonging to space group of Aba2(41)with crystal parameters of the unit cell dimensions as follows:a=1.071 65(13)nm,b=1.070 33(13)nm,c=1.329 04(16)nm,V=1.524 4(3)nm3,z=4,D=1.779g/cm3.The thermal decomposition temperature of ABTOX is 287.8℃ and its impact and friction sensitivities are 46 cm and 0,respectively.
Structural Insights into the Highly Solvating System of Axitinib via Binary and Ternary Solvates

Haibin Qu,Jiayin Zhang,Guimin Zhang,Zhonghua Li,Yu Liu,Songgu Wu,Junbo Gong

DOI: https://doi.org/10.1021/acs.cgd.1c01021

2022-01-24

Abstract:Axitinib is a well-known model in crystal engineering, exhibiting a high tendency to form various solvates, and more than 70 kinds of solvates have been reported. Therefore, it is a challenge to elucidate the effect of solvents on the crystallization of Axitinib and develop the polymorph or solvate landscape of Axitinib. Here, we illustrate an uncommon and complicated solvation behavior of Axitinib from the structural analysis and theoretical characterization. The structures of two new ternary solvates and five binary solvates are reported for the first time. Experimental and theoretical calculation and studies on phase transition are performed to rationalize and understand the formation of solvates and the transformation of polymorphisms. Crystal structure analysis and molecular properties reveal that shape, size, the hydrogen bond donor of the solvents, and the chance to lower crystal free energy are the main factors to drive solvates. Three sets of isostructural binary solvate are distinguished and calculated quantitatively to prove that the intermolecular interactions, strong hydrogen bond donor, CH−π, and orientation force control the classification results of binary solvates. Stability of solvates is found to be associated with the intermolecular interaction energies of solvent molecules with surrounding molecules. The polymorphic behavior of the desolventized product is attributed to the two-dimensional isostructurality between form IV and solvate.

chemistry, multidisciplinary,materials science,crystallography
Synthesis and Structural Characterization of Amidine, Amide, Urea and Isocyanate Derivatives of the Amino-closo-dodecaborate Anion [B12H11NH3]−

Yuanbin Zhang,Yuji Sun,Tao Wang,Jiyong Liu,Bernhard Spingler,Simon Duttwyler

DOI: https://doi.org/10.3390/molecules23123137

IF: 4.6

2018-01-01

Molecules

Abstract:The synthesis and structural characterization of new derivatives of [B12H12]2− is of fundamental interest and is expected to allow for extended applications. Herein we report on the synthesis of a series of amidine, amide, urea and isocyanate derivatives based on the amino-closo-dodecaborate anion [B12H11NH3]−. Their structures have been confirmed by spectroscopic methods, and nine crystal structures are presented.
Exploring the effects of solvents on an organic explosive: Insights from the electron structure, electrostatic potential, and conformational transformations of 2,4,6,8,10,12‐hexanitro‐2,4,6,8,10,12‐hexaazaisowurtzitane

Shuangfei Zhu,Qiang Gan,Nianshou Cheng,Changgen Feng

DOI: https://doi.org/10.1002/QUA.26202

2020-01-01

International Journal of Quantum Chemistry

Abstract:In order to attain comprehensive insights into the crystallization of 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) from solutions, the geometric and electronic structures and conformational transformations of its beta-, gamma-, epsilon-, zeta- and eta- forms in six organic solvents (ethanol, ethyl acetate, methanol, acetone, acetonitrile, and 2-propanol) were evaluated using quantum chemistry calculations. Results showed that solvents have little effect on the geometric structures of molecules but greatly impact the energy and electronic structure of CL-20. The electron density, atomic charges, and electrostatic potential of CL-20 exhibit polarization due to the solvent effect, especially in alcohols. The polarity of CL-20 increased because of the change in electron density. The transformations of the five conformers of CL-20 were studied thoroughly, and the energy barriers were evaluated using the Gibbs energies. Importantly, the reason eta-CL-20 is only found in CL-20-based cocrystals was suggested. These results indicate that solvents play a critical role in crystal growth.
Synthesis, Characterization, and Energetic Properties of Alkaline and Alkaline Earth Salts of 5,5′‐Bistetrazole‐1,1′‐diolate

Xiao Jun Wang,Qiang Su,Li Jie Li,Shao Hua Jin,Hu Niu,Shu Sen Chen,Qing Hai Shu

DOI: https://doi.org/10.1002/jhet.2810

2017-01-01

Journal of Heterocyclic Chemistry

Abstract:5,5′‐Bistetrazole‐1,1′‐diolate‐based energetic salts from alkaline (Li+, K+, and Na+) and alkaline earth metal salts (Mg2+, Ca2+, and Ba2+) were synthesized in a simple, straightforward manner and were characterized by IR and NMR spectroscopy, and elemental analysis. Single‐crystal X‐ray diffraction of 4 salts (Li+, Na+, K+, and Mg2+) is given. The X‐ray structures show that in the title compounds, the metal atoms are bonded to the nitrogen and oxygen in the bistetrazole ring to form the sandwich structure. In addition, thermal stabilities of all title compounds were determined with differential thermal analysis‐thermal gravity analysis. All these new materials exhibit excellent thermal stabilities, high density, and excellent insensitivity to impact (h50 > 60 cm). Especially, the potassium salt is of interest as potential “green heat‐resistance explosive” with high density and high thermal stability as well as low sensitivity.
Investigation of electronic and vibrational properties of dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate under high-pressure conditions

Junyu Fan,Yan Su,Jijun Zhao

DOI: https://doi.org/10.1039/d0cp04470a

IF: 3.3

2021-01-01

Physical Chemistry Chemical Physics

Abstract:The vibrational and electronic properties of TKX-50 reveal the enhanced intermolecular hydrogen bonds cause the change of intramolecular geometry of TKX-50, thereby triggering possible structural transformation.

chemistry, physical,physics, atomic, molecular & chemical
Molecular Dynamics Simulations on Dihydroxylammonium 5,5′-Bistetrazole-1,1′-diolate/hexanitrohexaazaisowurtzitane Cocrystal

Xiong Shuling,Shusen Chen,Shaohua Jin,Chunyuan Zhang

DOI: https://doi.org/10.1039/c5ra24924d

IF: 4.036

2016-01-01

RSC Advances

Abstract:Dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate (TKX-50) is a newly synthesized explosive with excellent comprehensive properties, and TKX-50/ε-CL-20 cocrystal has been proved to form by molecular dynamics simulations.
Solvent-induced Supramolecular Chirality Switching of Bis-(Trisalkoxy)-hexavanadates

Pingfan Wu,Jiake Chen,Panchao Yin,Zicheng Xiao,Jin Zhang,Aruuhan Bayaguud,Yongge Wei

DOI: https://doi.org/10.1016/j.poly.2012.06.007

IF: 2.975

2012-01-01

Polyhedron

Abstract:Two new compounds were obtained by modifying hexavanadate cores with pentaerythritol in aqueous solution, however, re-crystallized in water and acetonitrile, respectively. The molecular structures for (Bu4N)(2)[V6O13{(OCH2)(3)CCH2OH}(2)center dot H2O] (1) and (Bu4N)(2)[V6O13{(OCH2)(3)CCH2OH)(2)center dot 4CH(3)CN] (2) (Bu, n-butyl) have been characterized by FT-IR, UV-Vis, and single crystal X-ray diffraction. Compound 1 and 2 crystallize in monoclinic and triclinic space groups, respectively. Compound 1 shows supramolecular chirality in two-dimensional molecular assemblies while 2 does not have such chiral structure. The role of solvent molecules to the formation of supramolecular chirality in self-assembly architectures of polyoxometalates-based hybrid materials is discussed based on these two crystal structures. (C) 2012 Elsevier Ltd. All rights reserved.
Synthesis, Crystal Structure, Hirshfeld Surface and Computational Analysis of Bis-[2-(3,4-dihydroxyphenyl)-4,5-diphenyl-1H-imidazol-3-ium] Oxalate Ethanol Solvate

Peter Solo,M. Arockia doss

DOI: https://doi.org/10.1007/s10870-024-01016-3

2024-05-09

Journal of Chemical Crystallography

Abstract:Bis-[2-(3,4-dihydroxyphenyl)-4,5-diphenyl-1H-imidazol-3-ium] Oxalate ethanol solvate crystal has been isolated from slow solvent evaporation method and the structure was characterized by FT-IR, NMR and Single crystal XRD. The compound crystallizes in the triclinic space group P with a = 7.7925(16), b = 10.716(3), c = 13.952(3), α = 106.545(5), β = 97.514(5), γ = 110.152(5), V = 1014.0(4) Å3 and Z = 1. The single crystal X-ray data of the compound confirms two proton transfers from an oxalic acid to the pyrimidine-type-nitrogen of two separate imidazole rings. The structure and symmetry of the Imidazolium Oxalate is dictated by N–H⋯O and O–H⋯O hydrogen bonding interactions and are confirmed by hydrogen bonding analysis and hirshfeld surface analysis. The partial double bond character in the imidazolium ring confirms delocalization across the molecular framework. The partial double bond character of the C–O bonds also confirms delocalization in the oxalate anion. The crystal is 3-dimensional structure, with crystal growth in all the crystallographic axis. Computational analysis [DFT, B3LYP/6-311G(d,p)] reveals close correlation of the constrained optimized structure with the experimental data.

spectroscopy,crystallography
Two polymorphs and a sulfate of buprofezin: Crystal structure and Hirshfeld surface analysis

Zhiying Zhu,Yuming Zhou,Qingzhao Yao,Baiwang Sun,Mingliang Wang,Xi Zhong,Beibei Wang,Yi Xue,Xinchun Chen

DOI: https://doi.org/10.1016/j.poly.2018.08.034

IF: 2.975

2018-01-01

Polyhedron

Abstract:In this context, three compounds were obtained in different conditions by slow evaporation techniques. The crystal structures of compounds 1–3 have been solved through single-crystal X-ray diffraction, while other techniques (X-ray powder diffraction, Hirshfeld surfaces analysis, differential scanning calorimetry, thermo gravimetric analysis, Raman and Infrared Spectroscopies) have been used to characterize these products.
Additives Effects on Crystal Morphology of Dihydroxylammonium 5,5ʹ-Bistetrazole-1,1ʹ-diolate by Molecular Dynamics Simulations

Shu-Ling Xiong,Shu-Sen Chen,Shao-Hua Jin,Li-Jie Li

DOI: https://doi.org/10.1080/07370652.2015.1105883

IF: 2.421

2016-01-01

Journal of Energetic Materials

Abstract:Dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate (TKX-50) is a newly synthesized explosive with excellent comprehensive properties: high energy storage, low impact sensitivity, and low toxicity. To understand and improve the crystal morphology of TKX-50, we reported the polymer consistent force field to simulate the crystal morphology of TKX-50 by growth morphology (GM) method. We then used this force field in molecular dynamics (MD) simulations to predict the influences of additives on crystal facets of TKX-50. The calculated results indicate that ethanol, ethylene glycol, and acetic acid are more favorable to the spheroidization of TKX-50, which provides a theoretical support for the additive selection of crystalline system. Furthermore, we added the selected additives in the recrystallization system of TKX-50. The recrystallized samples possessed a small aspect ratio and were close to spherical in shape, which indicates that the experimental results are consistent with the simulated results.
Crystal Structure and Performances of the Dilithium 5,5′-Bistetrazole-1,1′-diolate Tetrahydrate

Xiao-jun WANG,Xiao-peng ZHANG,Feng-qin SHANG,Zhi-yan LU,Xia WANG,Xiao MA,Shao-hua JIN

DOI: https://doi.org/10.14077/j.issn.1007-7812.2016.04.004

2016-01-01

Abstract:Dilithium 5 ,5′‐bistetrazole‐1 ,1′‐diolate tetrahydrate[Li2 (BTO)(H2O)4 ]n was prepared and its single crystal was cultured .The single crystal structure was determined by a X‐ray single crystal diffractometer .The ther‐mal performance of [Li2 (BTO)(H2O)4 ]n was studied by differential thermal analysis/thermogravimetry (DTA/TG) technique ,and its impact sensitivity and friction sensitivity were measured .The results show that the crystal is triclinic belonging to space group P‐1 with crystaphicllogra parameters of a=0 .5345(17) nm ,b= 0 .6363(2) nm , c= 0 .830(3) nm ,α=105 .904(7) ,β=98 .216(7) ,γ=111 .516(7) ,V =2 .4302 (13) nm3 ,z=2 ,D=1 .736g/cm3 .Its thermal decomposition peak temperature is 349 .1℃ ,the impact sensitivity and friction sensitivity are 71 .8 cm and 0 ,respectively .
Computational study of solvent effects on the molecular self-assembly of tetrolic acid in solution and implications for the polymorph formed from crystallization.

Jie Chen,Bernhardt L Trout

DOI: https://doi.org/10.1021/jp7106582

2008-01-01

Abstract:The solution behavior of a model compound, tetrolic acid (TTA), is studied via molecular dynamics simulations in four organic solvents. The results suggest that strong interactions between TTA and solvent molecules (ethanol or dioxane) prevent the formation of carboxylic acid dimers in solution and thus promote the crystallization of TTA in a catemer-based form or a solvate form. Weak interactions, however, between TTA and solvent molecules (carbon tetrachloride or chloroform) facilitate the formation of carboxylic acid dimers in solution and thus promote the crystallization of a dimer-based crystal. Detailed solvent structure plays an important role in determining the relative stability of various growth synthons in solution and also the barriers along the pathway connecting them. This work illustrates the potential of molecular simulations to aid in the rational selection of solvents to obtain desired polymorphs during crystallization.

Crystal structure evolution of an energetic compound dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate induced by solvents

Crystal Morphology of Dihydroxylammonium 5,5′-Bistetrazole-1,1′-diolate (TKX-50) under Solvents System with Different Polarity Using Molecular Dynamics

Preparation, Crystal Structure and Properties of a New Crystal Form of Diammonium 5,5′‐Bistetrazole‐1,1′‐diolate

A New Strategy to Design Isostructural Salts: the Case of the Antitumor Drug Dimethylaminomicheliolide

Morphology Prediction of 5,5′-Bistetrazole-1,1′-diolate (BTO) Crystal in Solvents with Different Models Using Molecular Dynamics Simulation

Morphology prediction of dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate (TKX-50) crystal in different solvent systems using modified attachment energy model

Solubilities of Dihydroxylammonium 5,5′-Bistetrazole-1,1′-diolate in Various Pure Solvents at Temperatures Between 293.15 and 323.15 K

Solvent Control in the Formation of Supramolecular Solvates of 2,4-Diamino-6-methyl-1,3,5-triazine with 5-Nitroisophthalic Acid

Synthesis,Crystal Structure and Properties of the Ammonia Salt of 5,5′-Bistetrazole-1,1′-diolate

Structural Insights into the Highly Solvating System of Axitinib via Binary and Ternary Solvates

Synthesis and Structural Characterization of Amidine, Amide, Urea and Isocyanate Derivatives of the Amino-closo-dodecaborate Anion [B12H11NH3]−

Exploring the effects of solvents on an organic explosive: Insights from the electron structure, electrostatic potential, and conformational transformations of 2,4,6,8,10,12‐hexanitro‐2,4,6,8,10,12‐hexaazaisowurtzitane

Synthesis, Characterization, and Energetic Properties of Alkaline and Alkaline Earth Salts of 5,5′‐Bistetrazole‐1,1′‐diolate

Investigation of electronic and vibrational properties of dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate under high-pressure conditions

Molecular Dynamics Simulations on Dihydroxylammonium 5,5′-Bistetrazole-1,1′-diolate/hexanitrohexaazaisowurtzitane Cocrystal

Solvent-induced Supramolecular Chirality Switching of Bis-(Trisalkoxy)-hexavanadates

Synthesis, Crystal Structure, Hirshfeld Surface and Computational Analysis of Bis-[2-(3,4-dihydroxyphenyl)-4,5-diphenyl-1H-imidazol-3-ium] Oxalate Ethanol Solvate

Two polymorphs and a sulfate of buprofezin: Crystal structure and Hirshfeld surface analysis

Additives Effects on Crystal Morphology of Dihydroxylammonium 5,5ʹ-Bistetrazole-1,1ʹ-diolate by Molecular Dynamics Simulations

Crystal Structure and Performances of the Dilithium 5,5′-Bistetrazole-1,1′-diolate Tetrahydrate

Computational study of solvent effects on the molecular self-assembly of tetrolic acid in solution and implications for the polymorph formed from crystallization.