Abstract:In this study, the method of fluidized incineration and water washing to recover hydrogen fluoride (HF) was proposed to dispose of high fluorine-containing organic waste. The resource utilization of the waste was investigated in a fluidized bed incinerator with a disposal capability of 10 t/d. The evolution characteristics of fluorine, operation conditions of the incineration system, absorption coefficient for HF by water washing, and HF corrosion during combustion were assessed. The results showed that HF and fluorocarbons were detected as the initial gaseous fluorides released during combustion. The release of HF could be divided into three stages, in which HF was generated from the volatilization of HF in the waste and the hydrolysis of fluorine in water-soluble salts (60–220 °C), oxidative decomposition of fluorinated organic components and residual carbon (220–800 °C), and hydrolysis of insoluble fluorinated inorganic minerals (800–1000 °C). Fluorocarbons could be destroyed through reactions with free radicals H, O, and OH or through single-molecule decomposition. Enhancing the temperature in the furnace and increasing the content of oxygen and hydrogen in the incineration materials were conducive to reducing the generation of fluorocarbons. By sampling and analyzing the bottom slag, bag filter ash and exhaust gas during the field test, the relevant pollutant discharge could meet the national emission standards. The waste heat utilization of high-temperature flue gas and the recovery of hydrofluoric acid and hydrochloric acid were realized. In the recovery of HF by water washing, the total absorption coefficients for 1# to 4# packed absorbers were 52.38 kg/(h m2), 39.96 kg/(h m2), 5.98 kg/(h m2) and 3.89 kg/(h m2), respectively. In the actual operation, alumina showed good corrosion resistance to high-temperature HF and could be used as bed materials or refractory materials. Low-temperature corrosion of HF occurred in the quenching heat exchanger, which was damaged after 6 months of continuous operation. High-temperature corrosion of HF occurred in the waste heat boiler. No significant corrosion was observed in the 24 months of operation.

A study on the low-temperature wet synthesis of hydrofluoric acid from synthetic calcium fluoride and waste sulfuric acid

Recycle of synthetic calcium fluoride and waste sulfuric acid to produce electronic grade hydrofluoric acid

Removal of Fluoride from Geothermal Water by Waste-Synthesized Al(OH)3-HAP@ZMS Composite Adsorbent: Sorption Capability and Mechanism

Treatment of Fumaric Acid Wastewater Using Integrated Process of Hollow-Fiber Supported Liquid Membrane-Strip Dispersion with Reverse Osmosis

Study on the resource utilization of high fluorine-containing organic waste through fluidized incineration

A study on the Treatment of Hydrofluoric Acid Wastewater from Semiconductor Manufacturing Processes and the Possibility of Reuse of reclaimed water

Optimization of Calcium Fluoride Crystallization Process for Treatment of High-Concentration Fluoride-Containing Semiconductor Industry Wastewater

Efficient recovery of highly pure CaF2 from fluorine-containing wastewater using an icy lime solution

Utilization of Methyltrichlorosilane As a Novel and Efficient Reagent to Enhance Fluorine Recovery from Wet-Process Phosphoric Acid

The removal of fluosilicic acid ions in acid wastewater silicon etched by potassium salt

Pilot test on acidic fluoride-containing wastewater treatment in the photovoltaic industry through induced crystallization with a focus on calcium fluoride recovery

Experimental Research on Deep Silicon Removal in Spent SCR Catalysts

Recycling of lithium and fluoride from LiF wastewater from LiF synthesis industry by solvent extraction

Designing an efficient fluorine recovery strategy for Wet-Process phosphoric acid purification by disclosing competitive complexation behavior between fluorine species and metal cations

Efficient and cost-effective fluorine recovery from liquid-phase wet-process phosphoric acid via two-step precipitation method

Combing Seeding Crystallization with Flotation for Recovery of Fluorine from Wastewater: Experimental and Molecular Simulation Studies

Preparation of polyphosphoric acid and recovery of valuable fluorine resources though a microwave intensification flash evaporation process

Efficient recovery of fluorine from wet-process phosphoric acid using silicon powder as a new and eco-friendly reagent

Process Intensification for Enhanced Fluoride Removal and Recovery as Calcium Fluoride Using a Fluidized Bed Reactor

Fluorine Recovery from Etching Wastewater Through CaF2-based Near-Infrared Photocatalyst Synthesis

Internal coordination of vanadium industrial waste—Preparation of hydroxyapatite and fluorine wastewater purification