Atomic electron tomography in three and four dimensions

Jihan Zhou,Yongsoo Yang,Peter Ercius,Jianwei Miao

DOI: https://doi.org/10.1557/mrs.2020.88

IF: 5

2020-04-01

MRS Bulletin

Abstract:Abstract

materials science, multidisciplinary,physics, applied

What problem does this paper attempt to address?

Atomic electron tomography: 3D structures without crystals

J. Miao,P. Ercius,S. J. L. Billinge

DOI: https://doi.org/10.1126/science.aaf2157

IF: 56.9

2016-09-22

Science

Abstract:Crystallography has been fundamental to the development of many fields of science over the last century. However, much of our modern science and technology relies on materials with defects and disorders, and their three-dimensional (3D) atomic structures are not accessible to crystallography. One method capable of addressing this major challenge is atomic electron tomography. By combining advanced electron microscopes and detectors with powerful data analysis and tomographic reconstruction algorithms, it is now possible to determine the 3D atomic structure of crystal defects such as grain boundaries, stacking faults, dislocations, and point defects, as well as to precisely localize the 3D coordinates of individual atoms in materials without assuming crystallinity. Here we review the recent advances and the interdisciplinary science enabled by this methodology. We also outline further research needed for atomic electron tomography to address long-standing unresolved problems in the physical sciences.

multidisciplinary sciences
4D electron tomography

Oh-Hoon Kwon,Ahmed H Zewail

DOI: https://doi.org/10.1126/science.1190470

IF: 56.9

2010-06-25

Science

Abstract:Electron tomography provides three-dimensional (3D) imaging of noncrystalline and crystalline equilibrium structures, as well as elemental volume composition, of materials and biological specimens, including those of viruses and cells. We report the development of 4D electron tomography by integrating the fourth dimension (time resolution) with the 3D spatial resolution obtained from a complete tilt series of 2D projections of an object. The different time frames of tomograms constitute a movie of the object in motion, thus enabling studies of nonequilibrium structures and transient processes. The method was demonstrated using carbon nanotubes of a bracelet-like ring structure for which 4D tomograms display different modes of motion, such as breathing and wiggling, with resonance frequencies up to 30 megahertz. Applications can now make use of the full space-time range with the nanometer-femtosecond resolution of ultrafast electron tomography.
Electron Ptychographic Microscopy For Three-Dimensional Imaging

Si Gao,Peng Wang,Fucai Zhang,Gerardo T. Martinez,Peter D. Nellist,Xiaoqing Pan,Angus I. Kirkland

DOI: https://doi.org/10.1038/s41467-017-00150-1

IF: 16.6

2017-01-01

Nature Communications

Abstract:Knowing the three-dimensional structural information of materials at the nanometer scale is essential to understanding complex material properties. Electron tomography retrieves three-dimensional structural information using a tilt series of two-dimensional images. In this paper, we report an alternative combination of electron ptychography with the inverse multislice method. We demonstrate depth sectioning of a nanostructured material into slices with 0.34 nm lateral resolution and with a corresponding depth resolution of about 24-30 nm. This three-dimensional imaging method has potential applications for the three-dimensional structure determination of a range of objects, ranging from inorganic nanostructures to biological macromolecules.
Accurate atomic positions via local-orbital tomography with depth-dependent interactions

Liangze Mao,Jizhe Cui,Rong Yu

2024-01-23

Abstract:Three-dimensional reconstruction of atomic structure, known as atomic electron tomography (AET), has found increasing applications in materials science. The AET has been limited to very small nanoparticles due to the challenges of obtaining accurate atomic positions for large objects, for which the projection approximation generally assumed in AET is no longer valid due to the evolution of the electron probe along the beam direction. To address these challenges, we have developed a method that represents atoms as local orbitals and implements a depth-dependent probe-object interaction. Compared to conventional tomographic methods, the accuracy of atomic positions is improved by a factor of three and provides a solution for the tomographic reconstruction of large objects.

Materials Science
ATOM 1.0:A GPU Powered Package for Electron Tomography Reconstruction

CHU Qi,ZHANG Kai,WAN Xiaohua,ZHANG Ci,ZHANG Yan,ZHANG Guangyong,SHEN Bo,LU Xiaowei,ZHAO Kaiyong,CHU Xiaowen,ZHANG Fa,SUN Fei

DOI: https://doi.org/10.3724/sp.j.1260.2011.00231

2011-01-01

ACTA BIOPHYSICA SINICA

Abstract:Electron tomography(ET) has been developed rapidly and applied widely in recent years,as it provides the prospects of reconstructing non-uniform cells or macromolecules in nano scale.To overcome the deficits of current ET reconstruction software packages,especially the large computations of ET iterative reconstruction algorithms,we have developed a Graphic Processor Unit(GPU) powered software,ATOM.Its main functions include:2D alignment,reconstruction parameters estimation,3D reconstruction,and 2D image visualization etc.In 2D alignment part,iterative fiducialess shift and rotation alignment methods are applied.In 3D reconstruction part,it supports Back Projection(BP),several iterative reconstruction methods,and their parallel versions on GPU platform.The speedups of parallel iterative reconstruction methods are appealing,e.g.parallel Simultaneous Iterative Reconstruction Techniques(SIRT) can achieve 47 times speedup in contrast to serial SIRT.ATOM is an open source software and can run on any platform that supports Qt and CUDA libraries.It has a friendly graphic user interface along with detailed manuals.
Solving complex nanostructures with ptychographic atomic electron tomography

Philipp M Pelz,Sinéad M Griffin,Scott Stonemeyer,Derek Popple,Hannah DeVyldere,Peter Ercius,Alex Zettl,Mary C Scott,Colin Ophus

DOI: https://doi.org/10.1038/s41467-023-43634-z

2023-11-30

Abstract:Transmission electron microscopy (TEM) is essential for determining atomic scale structures in structural biology and materials science. In structural biology, three-dimensional structures of proteins are routinely determined from thousands of identical particles using phase-contrast TEM. In materials science, three-dimensional atomic structures of complex nanomaterials have been determined using atomic electron tomography (AET). However, neither of these methods can determine the three-dimensional atomic structure of heterogeneous nanomaterials containing light elements. Here, we perform ptychographic electron tomography from 34.5 million diffraction patterns to reconstruct an atomic resolution tilt series of a double wall-carbon nanotube (DW-CNT) encapsulating a complex ZrTe sandwich structure. Class averaging the resulting tilt series images and subpixel localization of the atomic peaks reveals a Zr11Te50 structure containing a previously unobserved ZrTe2 phase in the core. The experimental realization of atomic resolution ptychographic electron tomography will allow for the structural determination of a wide range of beam-sensitive nanomaterials containing light elements.
High-resolution 3D phase-contrast imaging beyond the depth of field limit via ptychographic multi-slice electron tomography

Andrey Romanov,Min Gee Cho,Mary Cooper Scott,Colin Ophus,Philipp Pelz

2023-11-05

Abstract:Resolving single atoms in large-scale volumes has been a goal for atomic resolution microscopy for a long time. Electron microscopy has come close to this goal using a combination of advanced electron optics and computational imaging algorithms. However, atomic-resolution 3D imaging in volumes larger than the depth of field limit of the electron optics has so far been out of reach. Electron ptychography, a computational imaging method allowing to solve the multiple-scattering problem from position- and momentum-resolved measurements, provides the opportunity to surpass this limit. Here, we experimentally demonstrate atomic resolution three-dimensional phase-contrast imaging in a volume surpassing the depth of field limits using multi-slice ptychographic electron tomography. We reconstruct tilt-series 4D-STEM measurements of a Co3O4 nanocube, yielding 1.75 Å resolution in a reconstructed volume of (18.2nm)^3.

Materials Science,Applied Physics,Data Analysis, Statistics and Probability
Electron tomography for functional nanomaterials

Robert Hovden,David A. Muller

DOI: https://doi.org/10.1557/mrs.2020.87

2020-06-02

Abstract:Modern nanomaterials contain complexity that spans all three dimensions - from multigate semiconductors to clean energy nanocatalysts to complex block copolymers. For nanoscale characterization, it has been a long-standing goal to observe and quantify the three-dimensional (3D) structure - not just surfaces, but the entire internal volume and the chemical arrangement. Electron tomography estimates the complete 3D structure of nanomaterials from a series of two-dimensional projections taken across many viewing angles. Since its first introduction in 1968, electron tomography has progressed substantially in resolution, dose, and chemical sensitivity. In particular, scanning transmission electron microscope tomography has greatly enhanced the study of 3D nanomaterials by providing quantifiable internal morphology and spectroscopic detection of elements. Combined with recent innovations in computational reconstruction algorithms and 3D visualization tools, scientists can interactively dissect volumetric representations and extract meaningful statistics of specimens. This article highlights the maturing field of electron tomography and the widening scientific applications that utilize 3D structural, chemical, and functional imaging at the nanometer and subnanometer length scales.

Applied Physics,Materials Science
3D reconstruction of a million atoms by multiple-section local-orbital tomography

Liangze Mao,Jizhe Cui,Rong Yu

2024-05-25

Abstract:There exist two groups of electron microscopy methods that are capable of providing three-dimensional (3D) structural information of an object, i.e., electron tomography and depth sectioning. Electron tomography is capable of resolving atoms in all three dimensions, but the accuracy in atomic positions is low and the object size that can be reconstructed is limited. Depth sectioning methods give high positional accuracy in the imaging plane, but the spatial resolution in the third dimension is low. In this work, electron tomography and depth sectioning are combined to form a method called multiple-section local-orbital tomography, or nLOT in short. The nLOT method provides high spatial resolution and high positional accuracy in all three dimensions. The object size that can be reconstructed is extended to a million atoms. The present method establishes a foundation for the widespread application of atomic electron tomography.

Materials Science
ICON: 3D reconstruction with 'missing-information' restoration in biological electron tomography.

Yuchen Deng,Yu Chen,Yan Zhang,Shengliu Wang,Fa Zhang,Fei Sun

DOI: https://doi.org/10.1016/j.jsb.2016.04.004

IF: 3.234

2016-01-01

Journal of Structural Biology

Abstract:Electron tomography (ET) plays an important role in revealing biological structures, ranging from macromolecular to subcellular scale. Due to limited tilt angles, ET reconstruction always suffers from the 'missing wedge' artifacts, thus severely weakens the further biological interpretation. In this work, we developed an algorithm called Iterative Compressed-sensing Optimized Non-uniform fast Fourier transform reconstruction (ICON) based on the theory of compressed-sensing and the assumption of sparsity of biological specimens. ICON can significantly restore the missing information in comparison with other reconstruction algorithms. More importantly, we used the leave-one-out method to verify the validity of restored information for both simulated and experimental data. The significant improvement in sub-tomogram averaging by ICON indicates its great potential in the future application of high-resolution structural determination of macromolecules in situ.
Ultrasparse View X-ray Computed Tomography for 4D Imaging

Yanjie Zheng,Kelsey B Hatzell

DOI: https://doi.org/10.1021/acsami.3c06291

2023-07-26

Abstract:X-ray computed tomography (CT) is a noninvasive, nondestructive approach to imaging materials, material systems, and engineered components in two and three dimensions. Acquisition of three-dimensional (3D) images requires the collection of hundreds or thousands of through-thickness X-ray radiographic images from different angles. Such 3D data acquisition strategies commonly involve suboptimal temporal sampling for in situ and operando studies (4D imaging). Herein, we introduce a sparse-view imaging approach, Tomo-NeRF, which is capable of reconstructing high-fidelity 3D images from <10 two-dimensional radiographic images. Experimental 2D and 3D X-ray images were used to test the reconstruction capability in two-view, four-view, and six-view scenarios. Tomo-NeRF is capable of reconstructing 3D images with a structural similarity of 0.9971-0.9975 and a voxel-wise accuracy of 81.83-89.59% from 2D experimentally obtained images. The reconstruction accuracy for the experimentally obtained images is less than the synthetic structures. Experimentally obtained images demonstrate a similarity of 0.9973-0.9984 and a voxel-wise accuracy of 84.31-95.77%.
Imaging 3D Chemistry at 1 nm Resolution with Fused Multi-Modal Electron Tomography

Jonathan Schwartz,Zichao Wendy Di,Yi Jiang,Jason Manassa,Jacob Pietryga,Yiwen Qian,Min Gee Cho,Jonathan L. Rowell,Huihuo Zheng,Richard D. Robinson,Junsi Gu,Alexey Kirilin,Steve Rozeveld,Peter Ercius,Jeffrey A. Fessler,Ting Xu,Mary Scott,Robert Hovden

DOI: https://doi.org/10.1038/s41467-024-47558-0

2024-06-18

Abstract:Measuring the three-dimensional (3D) distribution of chemistry in nanoscale matter is a longstanding challenge for metrological science. The inelastic scattering events required for 3D chemical imaging are too rare, requiring high beam exposure that destroys the specimen before an experiment completes. Even larger doses are required to achieve high resolution. Thus, chemical mapping in 3D has been unachievable except at lower resolution with the most radiation-hard materials. Here, high-resolution 3D chemical imaging is achieved near or below one nanometer resolution in a Au-Fe$_3$O$_4$ metamaterial, Co$_3$O$_4$ - Mn$_3$O$_4$ core-shell nanocrystals, and ZnS-Cu$_{0.64}$S$_{0.36}$ nanomaterial using fused multi-modal electron tomography. Multi-modal data fusion enables high-resolution chemical tomography often with 99\% less dose by linking information encoded within both elastic (HAADF) and inelastic (EDX / EELS) signals. Now sub-nanometer 3D resolution of chemistry is measurable for a broad class of geometrically and compositionally complex materials.

Computational Physics,Materials Science,Data Analysis, Statistics and Probability
Three-dimensional atomic-scale structure of size-selected nanoclusters on surfaces

Z. Y. Li,N. P. Young,M. Vece,S. Palomba,R. E. Palmer,A. L. Bleloch,B. C. Curley,R. L. Johnston,J. Jiang,J. Yuan

DOI: https://doi.org/10.1007/978-3-540-85156-1_67

2008-01-01

Abstract:An unambiguous determination of the three-dimensional structure of nanoparticles is challenging. Electron tomography requires a series of images taken for many different specimen orientations. This approach is ideal for stable and stationary structures. But ultrasmall nanoparticles are intrinsically structurally unstable and may interact with the incident electron beam, constraining the electron beam density that can be used and the duration of the observation. Here we demonstrate that high-angle annular dark field (HAADF) in a spherical-aberration-corrected scanning transmission electron microscopy (STEM), coupled with imaging simulation, can be used to obtain a snapshot of the size, shape, orientation and atomic arrangement of size-selected metallic nanoclusters.
Real-time 3D analysis during electron tomography using tomviz

Jonathan Schwartz,Chris Harris,Jacob Pietryga,Huihuo Zheng Prashant Kumar,Anastasia Visheratina,Nicholas Kotor,Brianna Major,Patrick Avery,Peter Ercius,Utmarsch Ayachit,Berk Geveci,David Muller,Alessandro Genova,Yi Jiang,Marcus Hanwell,Robert Hovden

DOI: https://doi.org/10.1038/s41467-022-32046-0

2022-08-03

Abstract:The demand for high-throughput electron tomography is rapidly increasing in biological and material sciences. However, this 3D imaging technique is computationally bottlenecked by alignment and reconstruction which runs from hours to days. We demonstrate real-time tomography with dynamic 3D tomographic visualization to enable rapid interpretation of specimen structure immediately as data is collected on an electron microscope. Using geometrically complex chiral nanoparticles, we show volumetric interpretation can begin in less than 10 minutes and a high quality tomogram is available within 30 minutes. Real time tomography is integrated into tomviz, an open source and cross platform 3D analysis tool that contains intuitive graphical user interfaces (GUI) to enable any scientist to characterize biological and material structure in 3D.

Materials Science
4D-STEM Ptychography for Electron-Beam-Sensitive Materials

Guanxing Li,Hui Zhang,Yu Han

DOI: https://doi.org/10.1021/acscentsci.2c01137

IF: 18.2

2023-01-03

ACS Central Science

Abstract:Recent advances in high-speed pixelated electron detectors have substantially facilitated the implementation of four-dimensional scanning transmission electron microscopy (4D-STEM). A critical application of 4D-STEM is electron ptychography, which reveals the atomic structure of a specimen by reconstructing its transmission function from redundant convergent-beam electron diffraction patterns. Although 4D-STEM ptychography offers many advantages over conventional imaging modes, this emerging...

chemistry, multidisciplinary
Near-Isotropic Sub-Ångstrom 3D Resolution Phase Contrast Imaging Achieved by End-to-End Ptychographic Electron Tomography

Shengboy You,Andrey Romanov,Philipp Pelz

2024-07-28

Abstract:Three-dimensional atomic resolution imaging using transmission electron microscopes is a unique capability that requires challenging experiments. Linear electron tomography methods are limited by the missing wedge effect, requiring a high tilt range. Multislice ptychography can achieve deep sub-Ångstrom resolution in the transverse direction, but the depth resolution is limited to 2 to 3 nanometers. In this paper, we propose and demonstrate an end-to-end approach to reconstructing the electrostatic potential volume of the sample directly from the 4D-STEM datasets. End-to-end multi-slice ptychographic tomography recovers several slices at each tomography tilt angle and compensates for the missing wedge effect. The algorithm is initially tested in simulation with a Pt@$\mathrm{Al_2O_3}$ core-shell nanoparticle, where both heavy and light atoms are recovered in 3D from an unaligned 4D-STEM tilt series with a restricted tilt range of 90 degrees. We also demonstrate the algorithm experimentally, recovering a Te nanoparticle with sub-Ångstrom resolution.

Computational Physics,Materials Science,Machine Learning,Optimization and Control
Tomography of Correlation Functions for Ultracold Atoms Via Time-of-flight Images

Wei Zhang,L-M. Duan

DOI: https://doi.org/10.1103/physreva.80.063614

2009-01-01

Abstract:We propose to utilize density distributions from a series of time-of-flight images of an expanding cloud to reconstruct single-particle correlation functions of trapped ultra-cold atoms. In particular, we show how this technique can be used to detect off-diagonal correlations of atoms in a quasi-one-dimensional trap, where both real- and momentum- space correlations are extracted at a quantitative level. The feasibility of this method is analyzed with specific examples, taking into account finite temporal and spatial resolutions in experiments.
Sub-nanometer depth resolution and single dopant visualization achieved by tilt-coupled multislice electron ptychography

Zehao Dong,Yang Zhang,Chun-Chien Chiu,Sicheng Lu,Jianbing Zhang,Yu-Chen Liu,Suya Liu,Jan-Chi Yang,Pu Yu,Yayu Wang,Zhen Chen

2024-06-07

Abstract:Real-space imaging of three-dimensional atomic structures is a critical yet challenging task in materials science. Although scanning transmission electron microscopy has achieved sub-angstrom lateral resolution through techniques like electron ptychography1,2, depth resolution remains limited to only 2 to 3 nanometers with a single projection setup3,4. Attaining better depth resolution typically necessitates large sample tilt angles and many projections, as seen in atomic electron tomography5,6. Here, we develop a new algorithm based on multislice electron ptychography which couples only a few projections at small tilt angles, but is sufficient to improve the depth resolution by more than threefold to the sub-nanometer scale, and potentially to the atomic level. This technique maintains high resolving power for both light and heavy atoms, and significantly improves the visibility of single dopants. We are thus able to experimentally detect dilute substitutional praseodymium dopants in a brownmillerite oxide, Ca2Co2O5, in three dimensions and observe the accompanying lattice distortion. This technique requires only a moderate level of data acquisition or processing, and can be seamlessly integrated into electron microscopes equipped with conventional components.

Materials Science,Mesoscale and Nanoscale Physics
Quantum state tomography of molecules by ultrafast diffraction

Ming Zhang,Shuqiao Zhang,Yanwei Xiong,Hankai Zhang,Anatoly A.Ischenko,Oriol Vendrell,Xiaolong Dong,Xiangxu Mu,Martin Centurion,Haitan Xu,R.J.Dwayne Miller,Zheng Li

DOI: https://doi.org/10.1038/s41467-021-25770-6

2021-07-28

Abstract:Ultrafast electron diffraction and time-resolved serial crystallography are the basis of the ongoing revolution in capturing at the atomic level of detail the structural dynamics of molecules. However, most experiments employ the classical "ball-and-stick" depictions, and the information of molecular quantum states, such as the density matrix, is missing. Here, we introduce a framework for the preparation and ultrafast coherent diffraction from rotational wave packets of molecules, and we establish a new variant of quantum state tomography for ultrafast electron diffraction to characterize the molecular quantum states. The ability to reconstruct the density matrix of molecules of arbitrary degrees of freedom will provide us with an unprecedentedly clear view of the quantum states of molecules, and enable the visualization of effects dictated by the quantum dynamics of molecules.

Quantum Physics,Chemical Physics
In Situ Dynamic Four-Dimensional Strong Field Ionization Tomography

Noam Shlomo,Eugene Frumker

2024-05-29

Abstract:We present an approach for in situ dynamic four-dimensional (4D=3D space + 1D time) laser induced strong field ionization tomography, particularly suited for measuring far-from-equilibrium systems, such as supersonic and hypersonic pulsed gas jets. The inherent physical nature of strong-field interaction leads to significantly enhanced spatial resolution, with unique intensity-resolution coupling and localization of measurement depth. By employing femtosecond laser, temporal resolution is primarily limited by electronic jitter, typically to a few tens of picoseconds.

Atomic Physics,Instrumentation and Detectors,Optics

Atomic electron tomography in three and four dimensions

Atomic electron tomography: 3D structures without crystals

4D electron tomography

Electron Ptychographic Microscopy For Three-Dimensional Imaging

Accurate atomic positions via local-orbital tomography with depth-dependent interactions

ATOM 1.0:A GPU Powered Package for Electron Tomography Reconstruction

Solving complex nanostructures with ptychographic atomic electron tomography

High-resolution 3D phase-contrast imaging beyond the depth of field limit via ptychographic multi-slice electron tomography

Electron tomography for functional nanomaterials

3D reconstruction of a million atoms by multiple-section local-orbital tomography

ICON: 3D reconstruction with 'missing-information' restoration in biological electron tomography.

Ultrasparse View X-ray Computed Tomography for 4D Imaging

Imaging 3D Chemistry at 1 nm Resolution with Fused Multi-Modal Electron Tomography

Three-dimensional atomic-scale structure of size-selected nanoclusters on surfaces

Real-time 3D analysis during electron tomography using tomviz

4D-STEM Ptychography for Electron-Beam-Sensitive Materials

Near-Isotropic Sub-Ångstrom 3D Resolution Phase Contrast Imaging Achieved by End-to-End Ptychographic Electron Tomography

Tomography of Correlation Functions for Ultracold Atoms Via Time-of-flight Images

Sub-nanometer depth resolution and single dopant visualization achieved by tilt-coupled multislice electron ptychography

Quantum state tomography of molecules by ultrafast diffraction

In Situ Dynamic Four-Dimensional Strong Field Ionization Tomography