Abstract:For the preventive maintenance engineering of special pavements such as ultra-thin friction courses and bridge deck pavements, the performance requirements of the utilized high-viscosity asphalt, including the resistance to permanent deformation, cracking ability, durability, and recyclability, are becoming increasingly stringent. In this study, based on the click reaction principle of carbon-carbon double (CC) bond, hydroxyl-terminated polybutadiene (HTPB) and isophorone diisocyanate (IPDI) were selected as the raw materials to synthesize thermoplastic polyurethane (TPU), and then 4,4’-disulfanediyldiphenol (DSDDP) was introduced as the chain extender to design a high-viscosity thermoplastic polyurethane modified asphalt (PUA). Subsequently, the mechanical and rheological properties of PUA under different types of chain extenders and polyurethane (PU) contents were tested, and the microstructure and modification mechanism were investigated at multiple scales. The results indicated that after the introduction of DSDDP, the basic physical properties and viscosity of PUA were greatly enhanced, the fluidity was significantly reduced, and excellent deformation and cracking resistance were achieved at various temperatures. The microscopic tests revealed that the viscosity enhancement effect mainly originated from the click reaction between the disulfide (S-S) bonds in DSDDP and the CC bonds on the soft segments of PU, which can further crosslink the linear PU molecular chain and form a dense spatial network structure to restrict the flow of macromolecules. The dynamic exchange of some S-S bonds facilitates the repetitive opening of the PUA network structure at high temperatures, so the PUA still exhibits thermoplasticity at high temperatures, which verifies the feasibility of the proposed design. Moreover, the addition of DSDDP reduced the degree of microphase separation of PUA, so the designed PUA can effectively adapt to various temperature environments. Overall, the findings of this study can boost the application of this novel PUA in the thin surface layers of high-performance pavements.

Study on Fatigue Test and Life Prediction of Polyurethane Cement Composite (PUC) under High or Low Temperature Conditions

Design and Modification Mechanism of a Novel High-Viscosity Thermoplastic Polyurethane Modified Asphalt

Study on Flexural Fatigue Life of Ultra-High Toughness Cementitious Composites under Constant Amplitude Cyclic Loading

Preparation and Mechanical-Fatigue Properties of Elastic Polyurethane Concrete Composites

Method Of Fatigue-Life Prediction For An Asphalt Mixture Based On The Plateau Value Of Permanent Deformation Ratio

Fatigue Properties and Damage Characteristics of Polyurethane Mixtures under a Stress Control Mode

An Indoor Laboratory Simulation and Evaluation on the Aging Resistance of Polyether Polyurethane Concrete for Bridge Deck Pavement

Fatigue performance of a simply-supported T-beam UHPC bridge deck variable section joint structure

Fatigue performance evaluation of steel-UHPC composite orthotropic deck in a long-span cable-stayed bridge under in-service traffic

Fatigue properties of polyurethane concrete expansion joint anchorage zone

Evaluation Method of Fatigue Life for Asphalt Pavement on the Steel Bridge Deck Based on the Inhomogeneous Poisson Stochastic Process

Study on static load test of simply supported hollow slab bridge flexural strengthened with polyurethane–cement composite

Study on preparation and thermal performance improvements of composite phase change material for asphalt steel bridge deck

Strengthening of a Reinforced Concrete Bridge with Polyurethane-cement Composite (PUC)

Hot spot stress distribution and fatigue life evaluation of steel-UHPC deck in a long-span cable-stayed bridge

Experimental and analytical studies on flexural behavior of composite bridge decks with orthotropic steel deck and ultra-high-performance concrete (UHPC) slab under negative moment

Experimental study on flexural behavior of hollow steel-UHPC composite bridge deck

Fatigue Performance Research of Headed Studs in Steel and Ultra-high Performance Concrete Composite Deck

Bending Fatigue Properties of Ultra-High Toughness Cementitious Composite (UHTCC)

Experimental Study on Mechanical Properties of Polyurethane Cement Composite (PUC) Under Various Temperatures

Study on the Water Stability of Polyurethane Concrete from Perspective of Polyurethane-Aggregate Interface