Abstract:A cascading failure of landslide dams caused by strong earthquakes or torrential rains in mountainous river valleys can pose great threats to people's lives, properties, and infrastructures. In this study, based on the three-dimensional Reynolds-averaged Navier-Stokes equations (RANS), the renormalization group (RNG) k-ε turbulence model, suspended and bed load transport equations, and the instability discriminant formula of dam breach side slope, and the explicit finite volume method (FVM), a detailed numerical simulation model for calculating the hydro-morphodynamic characteristics of cascading dam breach process has been developed. The developed numerical model can simulate the breach hydrograph and the dam breach morphology evolution during the cascading failure process of landslide dams. A model test of the breaches of two cascading landslide dams has been used as the validation case. The comparison of the calculated and measured results indicates that the breach hydrograph and the breach morphology evolution process of the upstream and downstream dams are generally consistent with each other, and the relative errors of the key breaching parameters, i.e., the peak breach flow and the time to peak of each dam, are less than ±5%. Further, the comparison of the breach hydrographs of the upstream and downstream dams shows that there is an amplification effect of the breach flood on the cascading landslide dam failures. Three key parameters, i.e., the distance between the upstream and the downstream dams, the river channel slope, and the downstream dam height, have been used to study the flood amplification effect. The parameter sensitivity analyses show that the peak breach flow at the downstream dam decreases with increasing distance between the upstream and the downstream dams, and the downstream dam height. Further, the peak breach flow at the downstream dam first increases and then decreases with steepening of the river channel slope. When the flood caused by the upstream dam failure flows to the downstream dam, it can produce a surge wave that overtops and erodes the dam crest, resulting in a lowering of the dam crest elevation. This has an impact on the failure occurrence time and the peak breach flow of the downstream dam. The influence of the surge wave on the downstream dam failure process is related to the volume of water that overtops the dam crest and the erosion characteristics of dam material. Moreover, the cascading failure case of the Xiaogangjian and Lower Xiaogangjian landslide dams has also been used as the representative case for validating the model. In comparisons of the calculated and measured breach hydrographs and final breach morphologies, the relative errors of the key dam breaching parameters are all within ±10%, which verify the rationality of the model is applicable to real-world cases. Overall, the numerical model developed in this study can provide important technical support for the risk assessment and emergency treatment of failures of cascading landslide dams.

Effects of Dam Failure Mechanisms on Downstream Flood Propagation

Numerical Simulation of Two-Dimensional Dam Failure and Free-Side Deformation Flow Studies

Probabilistic fault displacement Hazard analysis in an extensional setting: Application to a strategic Dam and methodological implications

Modelling Flood Wave Propagation as a Result of Dam Piping Failure Using 2D-HEC-RAS

Numerical Simulation for Dam-Break Flood in Hurricane-Prone Regions

Probabilistic mapping of life loss due to dam-break flooding

Comparative Analysis and Risk Assessment of Dam-Break Floods: Taking Pingshuijiang Reservoir As an Example

Mitigation measures preventing floods from landslide dams: analysis of pre- and post-hydrologic conditions upstream a seismic-induced landslide dam in Central Italy

Tsunami propagation and flooding maps: An application for the Island of Lampedusa, Sicily Channel, Italy

Dam failure analysis and flood disaster simulation under various scenarios

Severe floods predictive ability: A proxy based probabilistic assessment of the Italian early warning system

Assessing the effectiveness of "River Morphodynamic Corridors" for flood hazard mapping

Numerical investigation of hydro-morphodynamic characteristics of a cascading failure of landslide dams

Integration of seasonal frequency domain electromagnetic surveys and geological data for assessing the integrity of earthen levee systems. The case study of the Panaro River (Northern Italy)

Using 2D HEC-RAS Modeling and Embankment Dam Break Scenario for Assessing the Flood Control Capacity of a Multi-Reservoir System (NE Romania)

Community-Based Approaches to Debris Flow Hazard Analysis in the Sibillini Mountain Range (Central Apennines, Italy)

Probabilistic hydro-geomorphological hazard assessment based on UAV-derived high-resolution topographic data: The case of Basento river (Southern Italy)

SPH–DEM modeling overtopping failure of earthfill dams

Novel approach to the derivation of dam breach parameters in 2D hydrodynamic modeling of earthquake induced dam failures

Numerical Simulation of Tailings Flow from Dam Failure over Complex Terrain

Physical and numerical modeling of a landslide dam breach and flood routing process