Abstract:A proton exchange membrane (PEM) fuel cell is one of the highly efficient hydrogen utilization devices. However, due to the complex physical and chemical processes in fuel cells, developing a mathematical model of the PEM fuel cell is challenging. In this study, a new coupled model based on the computational fluid dynamics method and a 1D model is proposed for the accurate and fast prediction of PEM fuel cell performance. First of all, the proposed model is validated using the literature data. It is then applied to simulate the distribution and evolution of the current density, hydrogen and oxygen mass fraction, and membrane water content in catalyst layer (CL). Results show that the increase in the current density is attributed to the increase in the consumption rate of hydrogen and oxygen and the increase in the membrane water content. In addition, the stabilized supply of the oxygen in cathode and the membrane water content in the anode CL are critical for the improvement of the fuel cell performance. For the cases studied in this research, when the output voltage decreases from 0.6 V to 0.3 V, the current density increases from 5738.1 A/m2 to 15171.2 A/m2. The average oxygen mass fraction in the cathode CL and the average membrane water content in the anode CL decreased by 42.3 % and 9.6 %, respectively. In addition, when the fuel cell starts up at 0.6 V, the concentration of hydrogen and oxygen drops gradually decreases along the flow direction of the CL, while the membrane water content rapidly increases initially, and then increases slowly, with the turning point around at approximately 2.2 x 10-3 m. Under the combined effect of hydrogen and oxygen concentration, as well as the membrane water content, the current density first increases and then decreases, with the maximum value exceeding 6500 A/m2.

Multi-physics-resolved digital twin of proton exchange membrane fuel cells with a data-driven surrogate model

Three-dimensional multi-field digital twin technology for proton exchange membrane fuel cells

AI-assisted proton exchange membrane (PEM) fuel cell performance prediction using CFD and data-driven surrogate models

A Novel "3d+digital Twin+3d" Upscaling Strategy for Predicting the Detailed Multi-Physics Distributions in a Commercial-Size Proton Exchange Membrane Fuel Cell Stack

Development of a Multiphysical Multidimensional Modeling of Proton Exchange Membrane Fuel Cell

A data-driven digital-twin prognostics method for proton exchange membrane fuel cell remaining useful life prediction

Design and Modelling of 3D Bionic Cathode Flow Field for Proton Exchange Membrane Fuel Cell

A 1 + 1-D Multiphase Proton Exchange Membrane Fuel Cell Model for Real-Time Simulation

A three-dimensional mixed-domain PEM fuel cell model with fully-coupled transport phenomena

A Hybrid Multi-Variable Experimental Model for a PEMFC

Simulation of PEM Fuel Cells Using the Mixed-domain Model

Development of a Multi-Physical 2-D Model of PEM Fuel Cell for Real-Time Control

Machine learning modeling for proton exchange membrane fuel cell performance

PEMFC Hybrid Model Modeling and Steady Simulation

Cross-Domain Diagnosis for Polymer Electrolyte Membrane Fuel Cell Based on Digital Twins and Transfer Learning Network

A data-driven digital-twin model and control of high temperature proton exchange membrane electrolyzer cells

Transient Computation Fluid Dynamics Modeling of A Single Proton Exchange Membrane Fuel Cell with Serpentine Channel

Towards Reliable Prediction of Performance for Polymer Electrolyte Membrane Fuel Cells via Machine Learning-Integrated Hybrid Numerical Simulations

Illustrative Case Study on the Performance and Optimization of Proton Exchange Membrane Fuel Cell

A Coupled CFD Model for an Accurate and Fast Prediction of the Unsteady Operation Process of a Proton Exchange Membrane Fuel Cell