Inexpensive thermochemical energy storage utilising additive enhanced limestone

Kasper T. Møller,Ainee Ibrahim,Craig E. Buckley,Mark Paskevicius

DOI: https://doi.org/10.1039/d0ta03080e

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:A thermochemical energy storage capacity retention of up to 90% over 500 cycles is achieved in cheap and abundant limestone.

materials science, multidisciplinary,chemistry, physical,energy & fuels

What problem does this paper attempt to address?

Exploring the Role of Additives in Enhancing the Performance of Limestone-Based Thermochemical Energy Storage: A Review

Rehan Anwar,M. Veronica Sofianos

DOI: https://doi.org/10.3390/en17112572

IF: 3.2

2024-05-26

Energies

Abstract:This review article explores the critical role of additives in enhancing the performance and durability of thermochemical energy storage (TCES) materials, particularly in limestone-based systems. It evaluates various strategies, including hydration and the use of fine particles, along with additives like Al2O3 and ZrO2, to address challenges like performance degradation and sintering over multiple cycles. Additionally, the review examines how multicyclic stability and material activity toward CO2 are related. It emphasizes the importance of selecting support materials that optimize both stability and reactivity. Furthermore, it highlights the need for systematic investigation into the selection, synthesis methods, and additive percentages to identify optimal formulations for improved multicyclic stability. Finally, it underscores the importance of understanding the mechanisms of interaction between additives and CaO/CaCO3 matrices to guide the design of effective additive-integrated systems. This comprehensive analysis provides valuable insights into current methodologies, emerging trends, and future directions for advancing sustainable energy storage technologies.

energy & fuels
Dolomite: a low cost thermochemical energy storage material

Terry D. Humphries,Kasper T. Møller,William D. A. Rickard,M. Veronica Sofianos,Shaomin Liu,Craig E. Buckley,Mark Paskevicius

DOI: https://doi.org/10.1039/c8ta07254j

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:Reversible storage of carbon dioxide in dolomite using a catalyst allows viable thermal energy storage technology.

materials science, multidisciplinary,chemistry, physical,energy & fuels
A Eutectic Mixture of Calcium Chloride Hexahydrate and Bischofite with Promising Performance for Thermochemical Energy Storage

Bryan Li,Louise Buisson,Ruby-Jean Clark,Svetlana Ushak,Mohammed Farid

DOI: https://doi.org/10.3390/en17030578

IF: 3.2

2024-01-26

Energies

Abstract:Thermochemical energy storage using salt hydrates is a promising method for the efficient use of energy. In this study, three host matrices, expanded vermiculite, expanded clay, and expanded natural graphite were impregnated with a eutectic mixture of CaCl2·6H2O and bischofite (MgCl2·6H2O). These composites were subjected to various humidity conditions (30–70% relative humidity) at 20 °C over an extended hydration period to investigate their cyclability. It was shown that only expanded natural graphite could contain the deliquescent salt at high humidity over 50 cycles. Hence, the expanded natural graphite composites containing either CaCl2·6H2O or CaCl2·6H2O/bischofite eutectic mixture were placed in a lab-scale open packed bed reactor, providing energy densities of 150 and 120 kWh/m3 over 20 h, respectively. The eutectic composite showed slightly lower temperature lift, water uptake rate, and power output but at reduced cost. Using the eutectic mixture also decreased the composite's dehydration temperature at which the maximum mass loss rate occurred around 16.2 °C to 62.3 °C, allowing recharge using less energy-intensive heating methods. The cost of storing 1 kWh of energy with expanded natural graphite composites is only USD 0.08 due to its stability. This research leveraging cost-effective composites with enhanced stability, reaction kinetics, and high thermal energy storage capabilities benefits renewable energy, power generation, and the building construction research communities and industries by providing a competitive alternative to sensible heat storage technologies.

energy & fuels
Relevant Influence of Alkali Carbonate Doping on the Thermochemical Energy Storage of Ca-based Natural Minerals During CaO/CaCO3 Cycles

Rui Han,Shuang Xing,Xueqian Wu,Caihong Pang,Shuangchun Lu,Yun Su,Qingling Liu,Chunfeng Song,Jihui Gao

DOI: https://doi.org/10.1016/j.renene.2021.09.021

IF: 8.7

2021-01-01

Renewable Energy

Abstract:The calcium-Looping process is an advantageous candidate for thermochemical energy storage in Concentrated Solar Power plants. Achieving fast thermal energy storage at a moderate temperature would be highly beneficial for the heat storage process. In this study, commercially available alkali carbonates (Li2CO3, Na2CO3, K2CO3) were used as dopants for limestone/dolomite to improve their decarbonation rates and cycling stability. Results show that alkali carbonate doping reduces the decarbonation temperature of limestone and dolomite by accelerating the ion diffusion during decomposition. However, the doping of alkali carbonate also enhanced the sintering of limestone-based CaO so that the alkali carbonate doped limestones fail to maintain their heat storage capacity after multiple cycles. In contrast, the Li2CO3 doped dolomite still maintains excellent cyclic stability, attributed to the inhibition effect of the MgO skeleton on sintering. From these results, we then derived the effect scheme of Li2CO3 on the decarbonation and carbonation of limestone or dolomite. This study presents a simple yet effective method of reducing the heat storage temperature of Ca-based mineral materials and maintaining their cycling stability, simultaneously, with promising potential for industrial use.
Strongly Coupled Calcium Carbonate/antioxidative Graphite Nanosheets Composites with High Cycling Stability for Thermochemical Energy Storage

Rui Han,Jihui Gao,Siyu Wei,Yanlin Su,Fei Sun,Guangbo Zhao,Yukun Qin

DOI: https://doi.org/10.1016/j.apenergy.2018.09.142

IF: 11.2

2018-01-01

Applied Energy

Abstract:Reversible carbonation/calcination of CaCO3 is a promising technology for thermochemical energy storage in concentrated solar power plants. However, the major drawback of this technology is the rapid deactivation of CaO due to sintering. In this study, newly developed CaCO3/graphite nanosheets composites were synthesized as the heat storage medium through a one-pot route varying the graphite nanosheets load (3-12 wt%). The impregnation of the composites with H3BO3 solutions enhance the initial weightlessness temperature of graphite nanosheets from 900 degrees C to 1050 degrees C in pure CO2 atmosphere, thus upgrading the stability of graphite nanosheets during heat storage/release process. The performances of the synthesized composites were evaluated by thermogravimetric analysis, which simulates the heat storage cycle. The composites showed improved heat storage/output capacity and faster heat input/output rate compared to pure CaCO3. Only 3 wt% of graphite nanosheets was needed to effectively stabilize the heat storage capacity of the material. The heat storage capacity of composites with 3 wt% graphite nanosheets is 1313 kJ/kg.mposite after 50 cycles, corresponding to 2.9 times as much as that of pure CaCO3. This high stability is attributed to the unique synthetic strategy in which the CaCO3 nanoparticles uniformly coated on graphite nanosheets surface, and their sintering and aggregation were prevented. This work brings the development of this technology to a level closer to its industrial application.
Energy storage and attrition performance of limestone under fluidization during CaO/CaCO3 cycles

Zhangke Ma,Yingjie Li,Wan Zhang,Yuzhuo Wang,Jianli Zhao,Zeyan Wang

DOI: https://doi.org/10.1016/j.energy.2020.118291

IF: 9

2020-09-01

Energy

Abstract:Thermochemical energy storage of CaO/CaCO3 system is a rapidly growing technology for application in concentrated solar power plant. In this work, the energy storage reactivity and attrition performance of the limestone during the energy storage cycles were investigated in a fluidized bed reactor. The effects of CO2 concentration, reaction temperature, fluidization velocity, particle size and number of cycles were discussed. With increasing CO2 concentration from 80% to 100%, the energy storage capacity and attrition rate of the limestone increase by 11% and 9%, respectively. The feasible carbonation and calcination temperatures are 850–870 °C and 800–850 °C, respectively. The energy storage capacity of the limestone improves with increasing fluidization velocity in carbonation stage. As the fluidization velocity increases from 0.04 to 0.06 m/s, the attrition rate of the limestone after 5 cycles increases by 96%. Smaller particles show higher energy storage and attrition resistance during the cycles. Further, the cyclic stability of the limestone carbonated at higher fluidization velocity is higher than that carbonated at static (solid-like) state. The limestone operated at the fluidization state exhibits a higher cyclic energy storage capacity than that at the static (solid-like) state. Higher fluidization velocity significantly mitigates the pore-plugging and sintering of the limestone.

energy & fuels,thermodynamics
Development of dense Ca-based, Al-stabilized composites with high volumetric energy density for thermochemical energy storage of concentrated solar power

Rui Han,Jihui Gao,Siyu Wei,Fei Sun,Qingling Liu,Yukun Qin

DOI: https://doi.org/10.1016/j.enconman.2020.113201

IF: 10.4

2020-10-01

Energy Conversion and Management

Abstract:Thermochemical energy storage based on the Calcium-Looping process characterized high energy density, low cost, and scalability, which is an advantageous candidate for the heat storage systems of Concentrated Solar Power plants. The main disadvantage of Calcium-Looping technology is the rapid decrease in the reactivity of CaO during cycling due to sintering. Many methods have been developed to synthesize high-cycling-behavior CaO-based materials. However, the state-of-the-art synthesized CaO-based materials remain far from the requirements due to the lack of consideration from an application perspective, which not only demands high-cycling-behavior but also needs to consider volumetric energy density. In this work, dense CaO/Al2O3 composites were fabricated using the space-confined chemical vapor deposition method and considering both stability and volumetric energy density. Among different Ca-precursors, calcium formate does not expand during calcination, thus possesses a relatively dense structure, and taken together with the deposition of Al2O3 on the surface of CaO grains obtained composites possessing high density and excellent stability. The optimized composite with 10 mol.% Al achieves a high volumetric energy density of 2.07 GJ/m3 after 20 cycles, which is 1.58, 4.31, and 6.68 times of the capacity of limestone-derived CaO, sol–gel based CaO/Al2O3 composites, and wet-mixing based CaO/Al2O3 composites, respectively. This study presents a design principle for CaO-based heat storage materials, which are becoming denser and more stable.

energy & fuels,thermodynamics,mechanics
A phase change calcium looping thermochemical energy storage system based on CaCO3/CaO-CaCl2

Sike Wu,Cheng Zhou,Priscilla Tremain,Elham Doroodchi,Behdad Moghtaderi

DOI: https://doi.org/10.1016/j.enconman.2020.113503

IF: 10.4

2021-01-01

Energy Conversion and Management

Abstract:Calcium looping thermal energy storage (CaL-TES) is promising because of its high operating temperature, excellent energy storage density, and low material cost. However, a significant problem with the CaL-TES system is the rapid degradation of CaO. To overcome this degradation problem and also improve the energy storage performance, a novel phase change calcium looping thermal energy storage (PCCaL-TES) process has been developed based on the solid solution system of CaCO3/CaO-CaCl2. In the charging process of the PCCaL-TES system, surplus energy is stored via sensible heat, latent heat, and chemical energy with the calcination and melting of the solid solution CaCO3/CaO-CaCl2. In the discharging process, the carbonation and solidification of CaCO3/CaO-CaCl2 takes place and thus the stored energy is retrieved. Compared to the conventional CaL-TES system, the innovative PCCaL-TES system can help maintain a high activity of CaO over long-term operation due to the enhanced heat and mass transfer in the liquid-state carbonation. In this study, the energy storage performance of PCCaL-TES was assessed using the simulation package Aspen Plus v10. According to the modeling results, the PCCaL-TES system can achieve a round-trip efficiency of up to 49% and an energy storage density of nearly 1.5 GJ/m3, presenting improvements of about 4% and 20%, respectively, compared with the conventional CaL-TES system. Meanwhile, a parametric analysis was carried out to examine the effect of key operating parameters on the system performance of PCCaL-TES. The calculations show that the round-trip efficiency of the PCCaL-TES system can be improved by raising the mole fraction of CaCl2, increasing the carbonator temperature, or employing an optimum carbonator pressure. It was also found that a low mole fraction of CaCl2, a high activity of CaO, or a low temperature of CO2 storage was beneficial to achieving a high energy storage density. Finally, the impact of other operating factors on the round-trip efficiency of PCCaL-TES was summarized in a sensitivity analysis. It revealed the round-trip efficiency of the PCCaL-TES system was dominantly determined by the performance of the CO2 turbine (W-TURB) and compressor (W-COMP), the gas–liquid heat exchanger (HX3) and the exhaust CO2 cooler (CL3).

energy & fuels,thermodynamics,mechanics
A Calcium Looping System Powered by Renewable Electricity for Long-Term Thermochemical Energy Storage, Residential Heat Supply and Carbon Capture

Qianghui Xu,Lwei Wang,Zhenshan Li,Lin Shi

DOI: https://doi.org/10.1016/j.enconman.2022.116592

IF: 10.4

2022-01-01

Energy Conversion and Management

Abstract:Affordable long-term energy storage and CO2 capture technique are imperative to developing the future car- bon-neutral energy system. This paper proposed a calcium looping system powered by excess renewable elec- tricity to achieve long-term thermochemical energy storage, residential heat supply and carbon capture. The system can be constructed with industrial equipment and exploit natural, abundant and cheap limestone as the circulating material. The electrical calciner is designed to charge the energy and produce the high-pressured CO2 during the valley of the electricity grid, while the carbonator side is primarily driven by the discharged ther- mochemical energy and on-demand coordinates the heat network along with the carbon capture. The HEATSEP framework is adopted to optimize heat transfer processes and operating conditions for deriving the most favorable system configuration in the energy and economic aspects. Compared to the reference plant with electric boilers and short-term heat storage tanks, an energy penalty of around 32.3% total energy percentage points should be paid to drive long-term energy storage and carbon capture. The energy penalty is attributed to thermal losses in the calciner and heat exchanger networks, chemical energy lost by the make-up flow of fresh limestone, CO2 compression for storage and auxiliary power for solid/fluid circulations. Due to a comparable total plant investment cost to the reference plant, the proposed system achieves the CO2 avoidance cost of 111.1 RMB/tonCO2, showing some competitiveness over current post-combustion carbon capture techniques. The techno-economic competitiveness of the proposed system can be further strengthened by replacing natural or synthetic Ca-based materials with high cycling performance instead of limestone, as well as extending applicable occasions to achieve almost year-round operation.
Designing Calcium-Looping Composites Based on Lattice Energy and Phase Combination/separation for Thermochemical Energy Storage

X. K. Tian,T. X. Xu,J. Yan,S. C. Lin,C. Y. Zhao

DOI: https://doi.org/10.1016/j.solmat.2022.111972

2022-01-01

Abstract:The cyclic stability enhancement of the CaO/CaCO3 thermochemical energy storage system is crucial for hightemperature thermal utilization of solar energy. In this study, we successfully enhance the long-term durability of calcium-looping composites by co-doping TiO2 and MgCl2 based on lattice energy and phase combination/separation mechanism. According to molecular dynamics simulations of metallic oxides, TiO2 shows higher thermal stability and better doping effects in calcium-looping materials. Further experiments indicate that the phase combination mechanism acting on high-valance metallic oxides like TiO2 can promote cyclic stability of calcium-looping materials. The calcium-based composite doped with 10 mol% TiO2 prepared by wet-mixing method exhibits high energy storage performance in 15 cycles. MgCl2 is also used as a dopant to improve cyclic stability of the calcium-based composite in long-term cycles further. The energy storage performance of the composite doped with 5 mol% TiO2 and 5 mol% MgCl2 is superior to single-doped composites. The average effective conversion ratio is 0.54 in 100 cycles and the energy storage densities are close to 1000 kJ/kg in most of the calcination/carbonation cycles. Microstructure characterizations indicate that the co-doped composite has abundant micropores and smaller particles with the more uniform size distribution. The modification mechanism at atomic scale will serve as guidelines for dopant selection preliminarily, and the novel TiO2/MgCl2 co-doped calcium-based composite is promising for long-term industrial applications, such as high-temperature thermal utilization of solar energy.
Exploring Synergistic Sintering Factors and Nanopore Regeneration of Calcium-Based Thermochemical Energy Storage Materials

X. K. Tian,S. J. Guo,S. C. Lin,J. Yan,S. H. Ju,C. Y. Zhao

DOI: https://doi.org/10.1016/j.solmat.2023.112593

IF: 6.9

2023-01-01

Solar Energy Materials and Solar Cells

Abstract:Calcium-based thermochemical energy storage is essential for high-temperature solar energy utilization. However, performance decay is inevitable in repeated calcination/carbonation cycles, even for modified materials. In this study, the effects of synergistic sintering factors on performance decay are investigated, including chemical reaction, temperature and CO2 atmosphere. More importantly, rather than complicating the initial preparation process of the anti-sintering composites to achieve higher stability, a regeneration method is proposed to repair the nanopores of sintered composites and recover their performances. After using citric acid to dissolve materials with heavily sintered morphologies and reconstruct their porous structures, the energy storage densities of both the co-doped and benchmark materials increase by 2–4 times. The regenerated Al/Mg co-doped composite also shows high cyclic stability in subsequent long-term cycles. Furthermore, DFT calculations illustrate the strong atomic interaction between CaO and dopants. The economic analysis reveals that the regeneration costs of the co-doped composites are approximately one-half of their synthesis costs, making them a cost-efficient choice for long-term industrial application. This work expands the limited perspectives of current modification research on improving cyclic stability. It can guide the actual industrial applications of thermochemical energy storage, thus enhancing material reutilization and realizing costs reduction.
Improved Durability in Thermochemical Energy Storage Using Ti/Al/Mg Co-doped Calcium-based Composites with Hierarchical Meso/Micro Pore Structures

X. K. Tian,S. C. Lin,J. Yan,C. Y. Zhao

DOI: https://doi.org/10.1016/j.cej.2022.138142

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:Calcium-based thermochemical energy storage is promising for high-temperature thermal utilization of the solar energy. However, the energy storage performances of calcium-based materials show sintering-induced decays after multiple cycles. Here, the co-doped CaO composites that are rich in mesopores and micropores are synthesized by a modified sol-gel method, where MgCl2 is the primary dopant, and tetrabutyl titanate or aluminum nitrate is used as an auxiliary dopant. The decomposition of MgCl2 into MgO leads to the formation of thin shell structures around the composites, which is further stabilized by the generated calcium titanate or calcium aluminate, as they work synergistically to improve the long-term cyclic stabilities. The conversions in CaO and cyclic stabilities of the co-doped composites are remarkable, higher than most of the existing composites. Their average energy storage densities exceed 1132 kJ kg(-1) over 100 calcination/carbonation cycles and more than 75% of CaO still maintains reactivity after 100 cycles. Their porous thin-shell and interconnected network structures provide ample space for reaction, and the particle sizes are also uniform with relatively lower particle growth, which reflect the high anti-sintering feature. The CaO-based composite chemistry and synthesis methods developed here show great promises for their long-term industrial applications in concentrated solar energy storage.
Optimising thermochemical energy storage: a comprehensive analysis of CaCO3 composites with CaSiO3, CaTiO3, and CaZrO3

Terry D Humphries,Adriana P Vieira,Yurong Liu,Eleanor McCabe,Mark Paskevicius,Craig E Buckley

DOI: https://doi.org/10.1039/d4cp01144a

2024-07-24

Abstract:With the increasing amount of renewable energy produced, many governments and industries are pushing for the installation of battery energy storage system (BESS) solutions. Thermal batteries are systems that store heat made from various energy sources, and can be used to produce electricity upon demand. These systems are easily scalable and can be installed in cities, homes and remote locations. Thermochemical energy storage (TCES) uses the enthalpy of a chemical reaction to store and release heat through endothermic and exothermic processes, respectively. CaCO3 has been identified as an ideal TCES material as it is cheap and abundant, but maximising long-term cyclability is key to ensure battery longevity. This article investigates the addition of CaSiO3, CaTiO3 and CaZrO3 to CaCO3 in a 1 : 1 ratio to ascertain the reaction properties and cyclic capacity over time. Cycling longevity and thermodynamic properties were determined using simultaneous differential scanning calorimetry and thermogravimetric analysis (DSC-TGA) along with the Sieverts technique, and their reaction pathway studied by powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). The low cost of the CaCO3-CaSiO3 material of $1.8 USD per kW hth suggests that if a suitable particle refinement agent were to be employed to ensure cycling longevity this material would be an excellent TCES material. Despite the CO2 cycling capacity of the CaCO3-CaZrO3 system only reducing by 16 wt% over 100 cycles, the cost of ZrO2 brings the materials cost to $30.9 USD per kW hth, making this material currently unsuitable for application. The CaCO3-CaTiO3 system showed only a 17% drop in total CO2 uptake over 100 cycles, although the cost was $11.1 USD per kW hth.
Development and Characteristics Analysis of Salt-Hydrate Based Composite Sorbent for Low-Grade Thermochemical Energy Storage

Wei Li,Jiri Jaromir Klemes,Qiuwang Wang,Min Zeng

DOI: https://doi.org/10.1016/j.renene.2020.05.062

IF: 8.7

2020-01-01

Renewable Energy

Abstract:Salt-hydrate based thermochemical energy storage is currently a momentous technique utilized for longterm energy storage due to the reversible gas-solid reaction under low-temperature. Among available salt candidates, LiOH center dot H2O is a promising thermochemical material owing to its high heat storage density of 1400 kJ/kg and low charging temperature. The expanded graphite (EG) is selected as a host matrix owing to its excellent thermal conductivity and abundant microstructure, which can promote the heat and mass transfer. This work focuses on the thermochemical performances of the form-stable LiOH$H2O/ EG composite sorbents. Five samples were being synthesized with EG contents of 0, 5, 8, 12 and 15 wt%. These porous sorbents are characterized to understand the microstructure and thermophysical properties. Considering the comprehensive effect of thermal conductivity and storage density, as well as the adsorption kinetics, the 8 wt% EG-doped sample is the most favourable sorbent, which possesses the thermal conductivity of 6.92 W/(m K) and energy density of 1120 kJ/kg. The cyclability results also reveal the energy capacity of this composite maintains similar to 90% of the original after ten consecutive heat charging (dehydration) and discharging (hydration), suggesting good stability. Additionally, the active energy of 2.58 x 10(9) s(-1) and pre-exponential factor of 59.5 kJ/mol for the sorbent is derived. Finally, the thermal power of 123 Wand thermal efficiency of 83.6% are achieved for the storage unit in simulation. All these results further confirmed the feasibility of the developed composite sorbent in low-grade heat storage. (C) 2020 Elsevier Ltd. All rights reserved.
High-performance CaO-based Composites Synthesized Using a Space-Confined Chemical Vapor Deposition Strategy for Thermochemical Energy Storage

Rui Han,Jihui Gao,Siyu Wei,Yanlin Su,Chengzhi Su,Junfeng Li,Qingling Liu,Yukun Qin

DOI: https://doi.org/10.1016/j.solmat.2019.110346

IF: 6.9

2020-01-01

Solar Energy Materials and Solar Cells

Abstract:The Calcium-Looping (CaL) process, based on the reversible carbonation/calcination of CaO, is a promising technology for thermochemical energy storage (TCES) in Concentrated Solar Power (CSP) plants. However, the major drawback of this technology is the rapid deactivation of CaO due to sintering. In this work, we have synthesized Cat)-based, inert oxide-stabilized composites through a space-confined chemical vapor deposition process. Different synthesis parameters such as the inert material (Al2O3, SiO2 or TiO2) used as the stabilizer and the CaO concentration in the sorbent were investigated. Among the three different promoters used to increase the resistance of CaO toward sintering, Al2O3 resulted in the most stable composites. The composite with only 5 mol. % Al showed an excellent CO2 uptake capacity, 0.59 g CO2/g composite, over 50 cycles without any deactivation. Based on the calculation, this composite maintained an energy density of 1.50 GJ/t after 50 cycles, corresponding to 87% of the theoretical maximum. This high stability is attributed to the unique synthetic strategy in which the thermally stable oxide nanoparticles deposited on the surface of CaO crystalline grain and prevented its aggregation and overgrowth.
Cementitious composite materials for thermal energy storage applications: a preliminary characterization and theoretical analysis

Luca Lavagna,Davide Burlon,Roberto Nisticò,Vincenza Brancato,Andrea Frazzica,Matteo Pavese,Eliodoro Chiavazzo

DOI: https://doi.org/10.1038/s41598-020-69502-0

IF: 4.6

2020-07-30

Scientific Reports

Abstract:Abstract The lack of robust and low-cost sorbent materials still represents a formidable technological barrier for long-term storage of (renewable) thermal energy and more generally for Adsorptive Heat Transformations—AHT. In this work, we introduce a novel approach for synthesizing cement-based composite sorbent materials. In fact, considering the number of available hygrosopic salts that can be accommodated into a cementitious matrix—whose morphological properties can be also fine-tuned—the new proposed in situ synthesis paves the way to the generation of an entire new class of possible sorbents for AHT. Here, solely focusing on magnesium sulfate in a class G cement matrix, we show preliminary morphological, mechanical and calorimetric characterization of sub-optimal material samples. Our analysis enables us to theoretically estimate one of the most important figures of merit for the considered applications, namely the energy density which was found to range within 0.088–0.2 GJ/m 3 (for the best tested sample) under reasonable operating conditions for space heating applications and temperate climate. The above estimates are found to be lower than other composite materials in the literature. Nonetheless, although no special material optimization has been implemented, our samples already compare favourably with most of the known materials in terms of specific cost of stored energy. Finally, an interesting aspect is found in the ageing tests under water sorption-desorption cycling, where a negligible variation in the adsorption capability is demonstrated after over one-hundred cycles.

multidisciplinary sciences
Calcium-looping thermochemical energy storage and mechanical performance of bio-templated CaO-based pellets under steam-containing environments

Nai Rong,Zhengyong Mu,Jiayi Shao,Kaiwei Liu,Long Han,Shanshan Wang,Xiuliang Shi,Geng Wang

DOI: https://doi.org/10.1016/j.est.2023.110377

IF: 9.4

2024-01-06

Journal of Energy Storage

Abstract:The calcium-looping thermochemical heat storage is recognized as a promising technology due to its affordable raw material expense, eco-friendliness, and superior heat storage and release capacity. To investigate the impact of inert support, pore-forming template, and reaction atmosphere on the cyclic thermochemical heat storage capacity and mechanical properties of calcium-based sorbent, spherical CaO-based pellets were prepared using cement as an inert support and microcrystalline cellulose , starch, and sesbania gum as pore-forming templates. The test results demonstrated that the optimal composition ratio for calcium-based particles was 5 wt% cement and 10 wt% pore-forming template. Calcium-based particles containing 5 wt% cement and 10 wt% cellulose demonstrated the highest thermal storage capacity. The steam-containing atmosphere reduced the heat storage ability of the calcium-based particles, but it greatly improved their mechanical characteristics. After undergoing 50 cycles with 10 vol% steam injection during calcination, the calcium-based pellets exhibited a mere 6.09 % reduction in E ̄g,N compared to the heat storage cycle without steam addition. In contrast, the average crushing strength experienced a remarkable increase of 42.65 %, while the attrition rate decreased by 30.18 %.

energy & fuels
Development of a new composite material for building energy storage based on lauric acid-palmitic acid-paraffin ternary eutectic and expanded perlite

Zhixuan Fan,Yunchao Zhao,Xuying Liu,Yu Shi,Dahua Jiang

DOI: https://doi.org/10.1016/j.est.2022.105136

IF: 9.4

2022-09-01

Journal of Energy Storage

Abstract:Building thermal energy storage is critical to global sustainability as building energy consumption rises. In this study, a lauric-palmitic acid-paraffin ternary eutectic (LPP) was prepared from lauric acid, palmitic acid, and paraffin, and this LPP eutectic was adsorbed into expanded perlite (EP) via vacuum adsorption method to form a composite phase change material (LPP/EP). Leakage tests show that the maximum loading rate of EP on LPP is 75 %. Then, the chemical structure, crystal structure, crystalline morphology, micromorphology, and thermal property of LPP/EP were evaluated by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Polarizing Optical Microscope (POM), scanning electronic microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TG). The results show that LPP/EP has superior crystal and chemical compatibility, LPP/EP melts at 31.78 °C and absorbs 117.34 J/g of latent heat, and LPP/EP has good thermal stability. Meanwhile, LPP/EP exhibits better thermal storage performance than EP. In addition, the 1000 melting-solidifying cycling experiment indicates that the LPP/EP has excellent durability. Therefore, the LPP/EP composite phase change materials will have an amazing performance in the field of building thermal energy storage.

energy & fuels
Enhancing solar absorption and reversibility in calcium looping-based energy storage via salt-promoted CaO

Dasol Choi,Soyoung Noh,Youngjune Park

DOI: https://doi.org/10.1016/j.cej.2023.144036

IF: 15.1

2023-06-17

Chemical Engineering Journal

Abstract:Calcium looping (CaL)-based solar to thermochemical energy storage is a promising option for long-term thermal energy storage in concentrated solar power generation. CaL is a chemical looping process involving reversible carbonation-calcination reactions among CaO, CO 2 , and CaCO 3 , which has distinct advantages, such as high energy storage density at high operating temperatures. However, the low optical absorption of CaO limits its application as a direct solar absorbing material, and the continuous reduction of reactivity through CaL reactions degrades the energy storage ability. In this work, we investigated the multi-doping of transition metals Fe, Co, Ni, and CaCl 2 to improve optical absorption and promote the carbonation reactivity of synthetic CaO-based materials. The synthetic CaO materials were synthesized by acetic acid-based wet mixing and sol–gel method. Proposed materials exhibited significantly enhanced optical absorption up to 88%, preserved within 78 – 85% throughout 45 cycles of CaL reactions. The production and regeneration of Ca 2 FeO 3 Cl are expected to enhance optical absorption. The CaL reaction analysis revealed better carbonation conversion performance holding with cyclic stability, achieving 1.94 MJ/kg for 50 cycles or 1.17 MJ/kg for 100 cycles. The reaction mechanism was investigated using in-situ high-temperature XRD, and a salt-promoted carbonation mechanism is proposed, which consists of Ca 2 FeO 3 Cl carbonation and carbonation in a molten salt phase, improving the mass transfer of Ca 2+ O 2– to adsorbed CO 2 . Based on the findings, we suggest the synergistic use of the CaCl 2 multi-doping method for synthetic CaO designs.

engineering, chemical, environmental
The key role played by mesoporous alumina as binder for obtaining ultra-hard CaO based pellets for thermochemical heat storage leveraging the CaO/CaCO 3 cycle

D. Castro-Yáñez,M. Erans,A. Peral,R. Sanz,J. González-Aguilar,M. Romero,L. Briones,E.S. Sanz-Pérez,J.M. Escola

DOI: https://doi.org/10.1016/j.jclepro.2024.141702

IF: 11.1

2024-03-13

Journal of Cleaner Production

Abstract:The synthesis of CaO-based pellets with high energy storage and suitable mechanical resistance after prolonged cycling is pivotal for the successful implementation of the Calcium looping (CaL) technology for energy storage in CSP plants. In this work, CaO-based spherical pellets (CAA) were prepared made up of 60 wt % Ca(OH) 2 and varying ratios (0–40 wt %) of commercial γ-Al 2 O 3 and mesoporous γ-Al 2 O 3 (m-Al 2 O 3 ). They were tested in TG in several CO 2 carbonation/decarbonation cycles (15 and 50 for selected pellets) and their respective average crushing strengths measured. After 15 cycles, the optimum pellet CAA 20-20 (60 wt % Ca(OH) 2 /20 wt % γ-Al 2 O 3 /20 wt % m-Al 2 O 3 ) exhibits a remarkable energy storage density of 1030 kJ/kg with a superb crushing strength of ∼29 N. This was ascribed to the enhanced formation of the calcium aluminate mayenite (Ca 12 Al 14 O 33 ), since the high BET surface area (384 m 2 g −1 ) of mesoporous γ-Al 2 O 3 promotes the interaction with calcium oxide. Additionally, CAA 20-20 showed meaningful porosity that favored CO 2 mass transport. Interestingly, after 50 cycles, the optimum CAA 20-20 pellet maintained a high carbonation yield (0.46), representing an 84 % of the initial value and corresponding to an energy storage density of ∼873 kJ/kg. Additionally, the optimum CAA 20-20 pellet was coated with an external layer of Al-MCM-41 silica that augmented its crushing strength up to 37 N, with a concurrent slight abatement in the carbonation yield and energy storage density after 50 cycles (0.43 and ∼824 kJ/kg). Consequently, both uncoated and coated CAA 20-20 pellet are promising for the successful implementation of CaL in CSP plants.

environmental sciences,green & sustainable science & technology,engineering, environmental

Inexpensive thermochemical energy storage utilising additive enhanced limestone

Exploring the Role of Additives in Enhancing the Performance of Limestone-Based Thermochemical Energy Storage: A Review

Dolomite: a low cost thermochemical energy storage material

A Eutectic Mixture of Calcium Chloride Hexahydrate and Bischofite with Promising Performance for Thermochemical Energy Storage

Relevant Influence of Alkali Carbonate Doping on the Thermochemical Energy Storage of Ca-based Natural Minerals During CaO/CaCO3 Cycles

Strongly Coupled Calcium Carbonate/antioxidative Graphite Nanosheets Composites with High Cycling Stability for Thermochemical Energy Storage

Energy storage and attrition performance of limestone under fluidization during CaO/CaCO3 cycles

Development of dense Ca-based, Al-stabilized composites with high volumetric energy density for thermochemical energy storage of concentrated solar power

A phase change calcium looping thermochemical energy storage system based on CaCO3/CaO-CaCl2

A Calcium Looping System Powered by Renewable Electricity for Long-Term Thermochemical Energy Storage, Residential Heat Supply and Carbon Capture

Designing Calcium-Looping Composites Based on Lattice Energy and Phase Combination/separation for Thermochemical Energy Storage

Exploring Synergistic Sintering Factors and Nanopore Regeneration of Calcium-Based Thermochemical Energy Storage Materials

Improved Durability in Thermochemical Energy Storage Using Ti/Al/Mg Co-doped Calcium-based Composites with Hierarchical Meso/Micro Pore Structures

Optimising thermochemical energy storage: a comprehensive analysis of CaCO3 composites with CaSiO3, CaTiO3, and CaZrO3

Development and Characteristics Analysis of Salt-Hydrate Based Composite Sorbent for Low-Grade Thermochemical Energy Storage

High-performance CaO-based Composites Synthesized Using a Space-Confined Chemical Vapor Deposition Strategy for Thermochemical Energy Storage

Cementitious composite materials for thermal energy storage applications: a preliminary characterization and theoretical analysis

Calcium-looping thermochemical energy storage and mechanical performance of bio-templated CaO-based pellets under steam-containing environments

Development of a new composite material for building energy storage based on lauric acid-palmitic acid-paraffin ternary eutectic and expanded perlite

Enhancing solar absorption and reversibility in calcium looping-based energy storage via salt-promoted CaO

The key role played by mesoporous alumina as binder for obtaining ultra-hard CaO based pellets for thermochemical heat storage leveraging the CaO/CaCO 3 cycle