Abstract:Process diagram of composite samples and performance test. Currently, with the development of many important fields such as aerospace and automotive industries, polymer composites have become an indispensable part of these fields. As for preparation methods, common methods like hot pressing make composites difficult to achieve continuous production. This paper proposed the continuous forced assembly (CFA) and designed continuous production facility, which can achieve the continuous preparation of low filler content (30 wt%) composites with high electrical/thermal conductivity. Besides, we structurally designed roll pressing device and explored its effect on the machining process. Here, short cut carbon fiber (SCF) and solid silica gel (MVQ) are used as electrically/thermally conductive filler and polymer matrix respectively, and continuous preparation of functional composites is completed by CFA method. Compared to the thermal conductivity (1.186 W/(m·K)) of SCF/MVQ composites prepared with lower viscosity matrix (MVQ‐A), the thermal conductivity of composites prepared with high viscosity matrix (MVQ‐D) reached 2.230 W/(m·K). Meanwhile, the process is optimized to explore the effects of the "accordion folding" and "pre‐stretch" methods on the thermal conductivity of composites, the thermal conductivity is converted from in‐plane to vertical direction. In addition, under the same filler content, 2 wt% rGO is beneficial in enhancing the electrical/thermal conductivity of prepared composites. The electrical conductivity and thermal conductivity of SCF28/rGO2/MVQ composite reach 663 S/m and 2.82 W/(m·K), which is higher than that of the properties of SCF/MVQ composite with the same filler content. To sum up, CFA facilitates continuous production of composites, which can be used in thermal management materials (TMMs). Highlights Compared with the "pre‐stretch" method, the thermal conductivity of SCF/MVQ composites prepared by "accordion folding" has a significant improvement. The SCF/rGO/MVQ composites prepared by CFA method show superior thermal conductivity and electrical conductivity. Composites prepared by CFA method can realize the continuous preparation of functional materials.

Continuous processing of pre-pregs using radio frequency heating

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Consolidation of aerospace-grade high-temperature thermoplastic carbon fiber composites via Nano-engineered electrothermal heating

Heating of thick continuous glass fiber reinforced thermoplastic plates via embedded metal mesh networks

Investigation of a 3D Printing Method for Continuous Carbon Fiber-Reinforced Thermosetting Epoxy Composite

Preparation and Process Parameter Optimization of Continuous Carbon Fiber-Reinforced Polycarbonate Prepreg Filament

Differentiated heating of CFRP composite structures wirelessly using microwave and electromagnetic resonators

Significantly enhanced laser trapping and heating of carbon nanotube/carbon fibre hierarchical composites for efficient laser-assisted automated fibre placement

Factor analysis on property enhancement of electrically/thermally conductive composites by continuous forced assembly

The effect of temperature field on the characteristics of carbon fiber reinforced thermoplastic composites in the laying and shaping process

High-content continuous carbon fiber reinforced multifunctional prepreg filaments suitable for direct 3D-printing

Experimental Study on Microwave-Based Curing Process with Thermal Expansion Pressure of PTFE for Manufacturing Carbon Fiber/Epoxy Composites

Carbon Fiber/Epoxy Interfacial Bonding Improvement by Microwave Pretreatment for Low-Energy Electron Beam Curing

Resistance heating forming process based on carbon fiber veil for continuous glass fiber reinforced polypropylene

Carbon nanotube film engineered fiber reinforced polymer composites

Radio Frequency Heating of Laser-Induced Graphene on Polymer Surfaces for Rapid Welding

Interfacial Enhancement for Carbon Fibre Reinforced Electron Beam Cured Polymer Composite by Microwave Irradiation

Fabrication and Formability of Continuous Carbon Fiber Reinforced Resin Matrix Composites Using Additive Manufacturing

Rapid Manufacturing via Selective Radio‐Frequency Heating and Curing of Thermosetting Resins

The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics

Development and characterization of a through-air thermobonding process with high heating rate for activating the binder and producing preforms for fibre-reinforced polymers