Abstract:Background: Good timing resolution in medical imaging applications such as TOF-CT or TOF-PET can boost image quality or patient comfort significantly by reducing the influence of background noise. However, the timing resolution of state-of-the-art detectors in CT and PET are limited by their light emission process. Core-valence cross-luminescence is an alternative, but well-known compounds (e.g. BaF2) pose several problems for medical imaging applications, such as their emission wavelength in the deep UV. CsZnCl-based materials show promise to solve this issue, as they provide fast decay times of 1-2 ns and an emission wavelength around 300 nm. Results: In this work, we investigated two CsZnCl-compounds: Cs2ZnCl4 and Cs3ZnCl5. We validated the previously published decay times on a time-correlated single-photon counting setup with 1.786 ± 0.016 ns for Cs2ZnCl4 and 1.034 ± 0.013 ns for Cs3ZnCl5. The setup's high resolution enabled the discovery of an additional prompt emission component with a significant abundance of 98 ± 18 (Cs2ZnCl4) and 86 ± 14 (Cs3ZnCl5) photons/MeV energy deposit. In a PET coincidence experiment, we measured the best coincidence time resolution (CTR) of 62 ps (FWHM) for Cs2ZnCL4 coupled to FBK VUV SiPMs with silicon oil. To assess the CTR for lower energies, we filtered the energy along the Compton continuum and found a deteriorated CTR that seems to be mainly influenced by photon statistics. Furthermore, this study gave us a rough estimate of e.g. 150 ps (FWHM) CTR at 100 keV energy for Cs2ZnCL4. From measurements with high activity of 14 MBq to check for pile-up effects we assume that Cs2ZnCl4 is better suited for high-rate time-of-flight applications than lutetium-based oxides. Simulations demonstrated that the stopping power of Cs2ZnCl4 is lower than for LSO:Ce,Ca, meaning that a high amount of material would be needed for TOF-PET applications. However, the stopping power seems acceptable for applications in TOF-CT. Conclusions: The fast decay time, state-of-the-art CTR in benchtop experiments and high-rate suitability make CsZnCl materials a promising candidate for time-of-flight experiments. We consider especially TOF-CT a suitable application due to its relatively low X-ray energies (~ 100 keV) and the thusly acceptable stopping power of Cs2ZnCl4. Currently, further exploration of the prompt emission and its creation mechanism is planned, as well as investigating the light transport of Cs2ZnCl4 in longer crystals.

Study on the Time Response of a Barium Fluoride Scintillation Detector for Fast Pulse Radiation Detection

Development of a fast radiation detector based on barium fluoride scintillation crystal

Ultrafast Time-Response Characteristics Of Algaas Materials

Suppression of the slow component of BaF$_{2}$ crystal luminescence with a thin multilayer filter

Slow component suppression and radiation damage in doped BaF/sub 2/ crystals

FAST TIMING: LIFETIME MEASUREMENTS WITH LaBr3(Ce) SCINTILLATORS

Ultrafast (600 ps) α-ray scintillators

Exploring Scintillators and Cherenkov Radiators for MIP Timing Detectors

CsI(Na) Micron-Scale Particles-Based Composite Material for Fast Pulsed X-ray Detection

Timing limits of ultrafast cross-luminescence emission in CsZnCl-based crystals for TOF-CT and TOF-PET

Sub-10 ps time tagging of electromagnetic showers with scintillating glasses and SiPMs

High-rate Gamma Spectrometry Using a LaBr3(Ce) Scintillator with a Fast Pulse Shaping

Ultrafast core-to-core luminescence in BaF2-LaF3 single crystals

Design study of a scintronic crystal targeting tens of picoseconds time resolution for gamma ray imaging: the ClearMind detector

Ionizing photon interactions modulate the optical properties of crystals with femtosecond scale temporal resolution

Radioactive contamination of BaF2 crystal scintillator

Composite fast scintillators based on high-Z fluorescent metal–organic framework nanocrystals

Record high time resolution of positron annihilation lifetime spectrometer achieved by double-stop setup and geometry optimization of scintillators

Sub-nanosecond time-resolved radiation measurement using x-ray focusing crystal spectrometers

Scintillation Properties of Electromagnetic Calorimeter Modules Based on BaF2 Crystals

Nanocrystalline Lead Halide Perovskites to Boost Time‐of‐Flight Performance of Medical Imaging Detectors