Abstract:The abundant reserve and low price of potassium resources promote K-ion batteries (KIBs) becoming a promising alternative to Li-ion batteries, while the large ionic radius of K-ions creates a formidable challenge for developing suitable electrodes. Here Ni-substituted Prussian blue analogues (PBAs) are investigated comprehensively as cathodes for KIBs. The synthesized K1.90Ni0.5Fe0.5[Fe(CN)6]0.89·0.42H2O (KNFHCF-1/2) takes advantage of the merits of high capacity from electrochemically active Fe-ions, outstanding electrochemical kinetics induced by decreased band gap and K-ion diffusion activation energy, and admirable structure stability from inert Ni-ions. Therefore, a high first capacity of 81.6 mAh·g–1 at 10 mA·g–1, an excellent rate property (53.4 mAh·g–1 at 500 mA·g–1), and a long-term lifespan over 1000 cycles with the lowest fading rate of 0.0177% per cycle at 100 mA·g–1 can be achieved for KNFHCF-1/2. The K-ion intercalation/deintercalation proceeds through a facile solid solution mechanism, allowing 1.5-electron transfer based on low- and high-spins FeII/FeIII couples, which is verified by ex situ XRD, XPS, and DFT calculations. The K-ion full battery is also demonstrated using a graphite anode with a high energy density of 282.7 Wh·kg–1. This work may promote more studies on PBA electrodes and accelerate the development of KIBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c02047?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c02047</a>.Additional ICP-AES and elemental analysis results, XPS spectra, XRD and detailed refinement results, CV and charge/discharge curves, operating voltage profiles, volume energy density curves, comparison of the cycling stability of published cathode electrodes for KIBs, ex situ XRD patterns, EIS profiles, DOS results and electron band structures, XRD and electrochemical performances of graphite anode, as well as the comparison of energy density of reported nonaqueous K-ion full cells (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c02047/suppl_file/nn0c02047_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Fast Rate and Long Life Potassium‐Ion Based Dual‐Ion Battery through 3D Porous Organic Negative Electrode

High rate and long cycle life porous carbon nanofiber paper anodes for potassium-ion batteries

A High Capacity and Working Voltage Potassium‐Based Dual Ion Batteries

Nitrogen-Rich Hard Carbon As A Highly Durable Anode for High-Power Potassium-Ion Batteries

Hierarchically Porous N‐Doped Carbon Fibers as a Free‐Standing Anode for High‐Capacity Potassium‐Based Dual‐Ion Battery

Molecular carbon skeleton with self−regulating ion−transport channels for long−life potassium ion batteries

Rational Construction of Advanced Potassium Ion Diffusion and Storage Matrix

Potassium Nickel Iron Hexacyanoferrate as Ultra-Long-Life Cathode Material for Potassium-Ion Batteries with High Energy Density

Realizing Fast Diffusion Kinetics Based On Three-Dimensional Ordered Macroporous Cu9s5@C For Potassium-Ion Batteries

Highly Concentrated and Nonflammable Electrolyte for High Energy Density K-Based Dual-Ion Battery

Rational design of microstructure and interphase enables high-capacity and long-life carbon anodes for potassium ion batteries

6.0 V High‐Voltage and Concentrated Electrolyte toward High Energy Density K‐Based Dual‐Graphite Battery

Ultrafine ZnS Nanoparticles in the Nitrogen-Doped Carbon Matrix for Long-Life and High-Stable Potassium-Ion Batteries

Boosting potassium-based dual ion battery with high energy density and long lifespan by red phosphorous

High-throughput Fabrication of 3D N-doped Graphenic Framework Coupled with Fe3C@porous Graphite Carbon for Ultrastable Potassium Ion Storage

Low-strain and ultra-long cycle stability large-diameter soft carbon microsphere potassium ion anode

A Porous Network of Bismuth Used as the Anode Material for High‐Energy‐Density Potassium‐Ion Batteries

Boron-Doped Pine-Cone Carbon With 3D Interconnected Porosity for Use as an Anode for Potassium-Ion Batteries With Long Life Cycle

Enhanced Kinetics Harvested in Heteroatom Dual‐Doped Graphitic Hollow Architectures Toward High Rate Printable Potassium‐Ion Batteries

Pseudocapacitive Potassium‐Ion Intercalation Enabled by Topologically Defective Soft Carbon toward High‐Rate, Large‐Areal‐Capacity, and Low‐Temperature Potassium‐Ion Batteries

Organic electrode for non-aqueous potassium-ion batteries