Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Preparation and electrical performance of BCHT lead-free piezoelectric ceramics via powder injection molding

BCHT Lead-Free Piezoelectric Ceramics Preparation and Ultrasonic Transducer Fabrication Via Powder Injection Molding Using Simple Binder

Doping Effects In (Ba0.85ca0.15)(Hf0.1ti0.9)O-3 Lead-Free Piezoelectric Ceramics Prepared Via Powder Injection Moulding Using Simple Binder

Pyroelectric Performance, Dielectric Response and Conductive Mechanism of BCHT Lead-Free Piezoelectric Ceramics Via Powder Injection Molding

Optimizing structure and electrical properties of high-Curie temperature PMN-PHT piezoelectric ceramics via tailoring sintering process

Preparation of KNN Based Lead-Free Piezoelectric Ceramics Via Composition Designing and Two-Step Sintering

Preparation and Properties of Nd-doped BCTH Lead-Free Ceramics by Solid-Phase Twin Crystal Method

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Composition Designing and Sintering Behavior Tailoring in [(ba1−xcax)0.995eu0.005](ti1−yhfy)o3 Multifunctional Piezoceramics

Decreasing sintering temperature for BCZT lead-free ceramics prepared via hydrothermal route

Tailoring Structure and Performance of BCZT Ceramics Prepared Via Hydrothermal Method

Preparation and properties of (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 lead-free ceramics via vat photopolymerization

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Phase Transition Behavior and High Piezoelectric Properties in Lead-Free BaTiO3–CaTiO3–BaHfO3 Ceramics

Composition Design of PMN-PH-PT Piezoelectric Ceramics for High-Temperature Actuator Applications

Structure and piezoelectric properties of (Ba1−xCax)(Ti0.95Hf0.05)O3 lead-free ceramics

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

High Piezoelectric D33 Coefficient of Lead-Free (ba0.93ca0.07)(ti0.95zr0.05)o3 Ceramics Sintered at Optimal Temperature

Ultra-high piezoelectric and dielectric properties of low-temperature-sintered lead hafnium titanate-lead niobium nickelate ceramics

Multifunctional Characteristics of BCTH:0.5% Sm3+ Ceramics Prepared via Hydrothermal Method and Powder Injection Molding

High-Throughput Preparation and Properties Investigation of BNT Based Lead-Free Piezoelectric Ceramics