Abstract:ConspectusAs renewable energy and CO2 utilization technologies progress to make a more significant contribution to global emissions reduction, carbon capture remains a critical component of the mission. Current CO2 capture technologies involve operations at point sources such as fossil fuel-based power plants or source-agnostic like in direct air capture. Each strategy has its own advantages and limitations, but in common, they all employ sorption-based methods with the use of sorbents strongly adhering to CO2. Amine solutions are the most widely used absorbents for industrial operations due to the robust chemical bonds formed between amines and CO2 under both dry and humid conditions, rendering excellent selectivity. Such strong binding, however, causes problematic regeneration. In contrast, purely physisorptive porous materials with high surface areas allow for the confinement of CO2 inside narrow pores/channels and have a lower regeneration energy demand but with decreased selectivity and capacity. The most promising solution would then be the unification of both types of sorbents in one system, which could bring about a practical adsorption-desorption process. In other words, the development of porous solid materials with tunable amine content is necessary to leverage the high contact surface of porous sorbents with the added ability to manipulate amine incorporation toward lower CO2 binding strength.To answer the call to uncover the most feasible amine chemistry in carbon capture, our group has devoted intense effort to the study of amine-based CO2 adsorbents for the past decade. Oriented along practicality, we put forth a principle for the design of our materials to be produced in no more than three synthetic steps with economically viable starting materials. Porous organic polymers with amine functionalities of various substitutions, meaning primary, secondary, and tertiary amines, were synthesized and studied for CO2 adsorption. Direct synthesis proved to be feasibly applicable for secondary and tertiary amine-incorporated porous polymers whereas primary-amine-based sorbents would be conveniently obtained via postsynthetic modifications. Sorbents based on tertiary amines exhibit purely physical adsorption behavior if the nitrogen atoms are placed adjacent to aromatic cores due to the conjugation effect that reduces the electron density of the amine. However, when such conjugation is inhibited, chemisorptive activity is observed. Secondary amine adsorbents, in turn, express a higher binding strength than tertiary amine counterparts, but both types can merit a strengthened binding by the physical impregnation of small-molecule amines. Sorbents with primary-amine tethers can be obtained via postsynthetic transformation of precursor functionalities, and for them, chemical adsorption is mainly at work. We conclude that mixed-amine systems could exhibit unprecedented binding mechanisms, resulting in exceptionally specific interactions that would be useful for the development of highly selective sorbents for CO2.

Effect of amine types and temperature of a natural rubber based composite material on the carbon dioxide capture

Natural rubber latex foam with particulate fillers for carbon dioxide adsorption and regeneration

Comparative Investigation of Nano-Sized Silica and Micrometer-Sized Calcium Carbonate on Structure and Properties of Natural Rubber Composites

Adsorption Capacity of Carbon Dioxide on Amine Modified Mesoporous Materials with Larger Pore Sizes

The Influence of Pore Size and Pore Structure of Silica-Based Material on the Amine-Modified Adsorbent for CO2 Capture

Adsorption of low-concentration carbon dioxide on amine-modified carbon nanotubes at ambient temperature

Effect of silica particle size and coating by natural latex on properties of styrene‐butadiene rubber/carbon black/silica composites

Enhanced Tolerance to Flue Gas Contaminants on Carbon Dioxide Capture Using Amine-Functionalized Multiwalled Carbon Nanotubes

The effect of nanostructured silica synthesis temperature on the characteristics of silica filled natural rubber composite

Direct Air Capture of CO2 Using Bi-Amines-functionlized Hierarchical Mesoporous Silica: Effects of Organic Amine Loading, Moisture and Temperature

High CO2 adsorption on amine-functionalized improved macro-/mesoporous multimodal pore silica

Investigation of adsorption/desorption performance by aminopropyltriethoxysilane grafted onto different mesoporous silica for post-combustion CO2 capture

Amine functionalized mesocellular silica foam as highly efficient sorbents for CO2 capture

Carbon dioxide adsorption/desorption performance of single- and blended-amines-impregnated MCM-41 mesoporous silica in post-combustion carbon capture

Enhanced carbon dioxide adsorption by amine-modified KCC-1

Effect of pore structure of silica support on the performance of CO 2 capture

Capturing Acidic CO2 Using Surface-Active Difunctional Core-Shell Composite Polymer Particles via an Aqueous Medium

Utilizing silica fume and synthetically produced mesoporous silicas for simulated flue gas CO2 adsorption

The effect of humidity on the enhanced CO2 adsorption of amine-functionalized microporous activated carbon

Carbon Dioxide Adsorption on Amine-Impregnated Mesoporous SBA-15 Sorbents: Experimental and Kinetics Study

Amine Chemistry of Porous CO2 Adsorbents