Controllable Droplet Coalescence in the T-Junction Microchannel with a Funnel-Typed Expansion Chamber

Weixi Guo,Chunying Zhu,Taotao Fu,Youguang Ma

DOI: https://doi.org/10.1021/acs.iecr.0c00803

2020-05-11

Abstract:Droplet coalescence in a novel funnel-typed expansion chamber in the T-junction microchannel was visually investigated to improve and precisely control droplet coalescence. Three types of coalescence regimes were observed: noncoalescence, two-droplet coalescence, and multiple coalescence. For two-droplet coalescence, three subtypes were observed: slipping coalescence, colliding coalescence, and squeezing coalescence. The different trajectories of the two droplets in the three subtypes and the influences of the two-phase flow rate and the length-to-width ratio of the expansion chamber on the coalescence percentage for two-droplet coalescence were studied systematically. The results indicate that the coalescence percentage increases first and then declines with the increase of a continuous phase flow rate or the decrease of the dispersed phase flow rate. Under a lower continuous phase flow rate, the coalescence percentage rises with an increasing length-to-width ratio of the chamber, while an inverse trend was found in the higher continuous phase flow rate.This article has not yet been cited by other publications.

engineering, chemical

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to achieve precise control of the droplet fusion process by introducing a new type of funnel - shaped expansion cavity in the T - shaped microchannel. Specifically, the researchers hope that through this structural design, they can significantly improve the efficiency of the fusion of two droplets and expand its operating range. In addition, the study also explored the influence of different phase flow velocities and the aspect ratio of the expansion cavity on the fusion rate of two droplets, aiming to optimize the application of microfluidic technology in fields such as biology, medicine, and chemistry.

Three main droplet fusion modes were observed in the paper: non - fusion, two - droplet fusion, and multi - droplet fusion. For two - droplet fusion, it is further divided into three subtypes: sliding fusion, collision fusion, and extrusion fusion. The study systematically analyzed the droplet trajectories under these fusion modes and the influence of different variables (such as two - phase flow velocities, aspect ratio of the expansion cavity) on the fusion rate of two droplets.

Through experiments, the study found that as the continuous - phase flow velocity increases or the dispersed - phase flow velocity decreases, the fusion rate first increases and then decreases. At a lower continuous - phase flow velocity, the fusion rate increases as the aspect ratio of the expansion cavity increases; while at a higher continuous - phase flow velocity, the opposite trend is shown. These findings are helpful for in - depth understanding of the droplet fusion mechanism and provide a theoretical basis for designing more effective microfluidic devices.