Abstract:Effect of varying surface structures of the inner rotating cylinder on characteristics of droplet formed in a liquid-liquid Taylor-Couette (TC) reactor is investigated. Two novel surface structures of inner cylinders, designed with axially corrugated surface (N40) and with typical three-dimensional roughness (NZ40), respectively, were adopted for the investigation. The high-speed camera visualization was used to measure the droplet size while CFD modelling was applied to predict the fluid dynamics of TC flows with such two inner cylinders and a smooth surface inner cylinder, thus revealing the effect of inner cylinder configuration on the droplet formation in the TC flows. The experimental results have clearly indicated that both the rotation speed and surface configuration variation of the inner cylinders affect the generated droplet size and distribution. As the rotation speed increases, the droplet size is obviously reduced for all types of inner cylinder configurations. Compared with the conventional smooth surface inner cylinder, the two new types of inner cylinders with special surface structures can produce much smaller droplets, especially for the case of N40 surface structure inner cylinder, with which the smallest droplet size was found at all the experimental conditions. CFD modelling results have demonstrated that the surface configurations of inner cylinder can significantly affect the turbulence generation, consequently altering the distributions of turbulent kinetic energy and local turbulence shear strain rate. As a result, the droplet size was found to be controlled by the change of the local turbulent dissipation rate that was strongly associated with the surface structures of inner cylinders. Empirical correlations that correlate the droplet size with the Weber number and Reynolds number were proposed based on the high-speed camera visualization data.(c) 2022 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http:// creativecommons.org/licenses/by/4.0/).

CFD Simulation of Internal Flow and Mixing within Droplets in a T-Junction Microchannel

Liquid-liquid Two-Phase Flow and Mass Transfer in T-shaped Micro-Channel Network

Mixing in T-shaped Micro-Channel Network

Numerical and Experimental Investigation of Mixing Characteristics in the Constructal Tree-Shaped Microchannel

EFFECTS OF INLET ARRANGEMENTS ON LIQUID-LIQUID FLOW PATTERNS IN CROSS-JUNCTION SQUARE MICROCHANNELS

Mixing Efficiency Analysis On Droplet Formation Process In Microchannels By Numerical Methods

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Effect of Inner Cylinder Configuration on Liquid Droplet Dispersion and Size Distributions in a Taylor-Couette Reactor

Inner circulation flow characteristics of coalescence droplets in microchannel

Experimental and Numerical Study of Mixing Behavior Inside Droplets in Microchannels

NUMERICAL SIMULATION OF TRANSVERSE DIFFUSION IN A MICROCHANNEL

Cfd Simulation of Droplet Formation in Microchannels by A Modified Level Set Method

Micro-PIV Measurement and CFD Simulation of Flow Field and Swirling Strength During Droplet Formation Process in a Coaxial Microchannel

Droplet behavior and its effects on flow characteristics in T-junction microchannels

Numerical and experimental studies of mixing characteristics in a T-junction microchannel using residence-time distribution

Numerical and experimental investigation of dripping and jetting flow in a coaxial micro-channel

Three-dimensional numerical simulation of a droplet generation in a double T-junction microchannel

Effect of droplet superficial velocity on mixing efficiency in a microchannel

A Comparative Study of Two Numerical Methods Applied for 3D Liquid-Liquid Taylor Flow in a Microchannel

Effect of Viscosity on Liquid–Liquid Slug Flow in a Step T-Junction Microchannel

Controllable Droplet Coalescence in the T-Junction Microchannel with a Funnel-Typed Expansion Chamber