Abstract:Plasma nitriding is widely used in various industrial applications to improve surface hardness and wear properties. Especially for tool steels, it is also used to improve the support and adhesion of diamond-like carbon (DLC) coatings. The properties of the nitrided zone produced by plasma nitriding are influenced by the applied process parameter, in particular temperature and time. However, for high-alloy tool steels, a deeper understanding of the underlying diffusion processes of the nitrogen and the interaction with the existing microstructure, as well as the effects on the case depth is still lacking. Therefore, in this study, specimens of high-alloy tool steel X153CrMoV12 were plasma nitrided at varying temperatures (480 °C, 520 °C, 560 °C) and treatment times (2 h, 4 h, 16 h). The resulting nitrided zones were investigated by optical and scanning electron microscopy (OM and SEM), depth-dependent glow discharge optical emission spectroscopy (GDOES), X-ray diffraction (XRD), and hardness measurements to characterize their microstructure, chemical composition, and hardness depending on the process parameters. The distribution of carbides (M7C3), e.g., chromium carbides, affects the diffusion of the nitrogen and the layer growth. An increase of temperature and duration leads to an increased layer thickness. The composition of the compound layer is, e.g., influenced by the process parameters: ε nitrides (Fe2–3N) occurred preferentially at lower temperatures, while γ′ nitrides (Fe4N) appeared mostly at higher temperatures. In order to investigate the influence of the carbides of the high-alloy tool steel on the nitriding process, a new methodology was developed by means of finite element analysis (FE), which makes it possible to analyze this influence on the development of the nitrogen concentration profile. This methodology makes it possible for the first time to map the heterogeneous nitrogen evolution and distribution.

Surface Characteristics and High-Temperature Wear of Plasma Nitrided Layer on Steel H13

Microstructure and Properties of Plasma Nitrided 00cr12ni9mo4cu2ti Maraging Stainless Steel

Effect of nitrided-layer microstructure control on wear behavior of AISI H13 hot work die steel

High Temperature Sliding Wear Behaviors of Ion Plating Tin Composite Coating with Ion Nitriding As Interlayer on Hot Work Die Steel

Investigation of the Surface Properties and Wear Properties of AISI H11 Steel Treated by Auxiliary Heating Plasma Nitriding

Microstructure and mechanical properties of surface layer of M50NiL steel plasma nitrided

Nanosized precipitates in H13 tool steel low temperature plasma nitriding

Evolution of Microstructure and Hardness of the Nitrided Zone during Plasma Nitriding of High-Alloy Tool Steel

Kinetics and wear behaviour of M50NiL steel plasma nitrided at low temperature

Improvement of stamping performance of H13 steel by compound-layer free plasma nitriding

Plasma nitrided 65Mn steel: Microstructure, tribocorrosion and electrochemical properties and DFT calculation

Study on Complex Chromizing at 550℃ for H13 Steel

Tribological Studies of Plasma Source Ion Nitrided Low Alloy Tool Steel

Microstructural and tribological characterization of plasma- and gas-nitrided 2Cr13 steel in vacuum

Sliding Wear of Nitrided and Duplex Coated H13 Steel Against Aluminium Alloy

Plasma Nitrided and TiCN Coated AISI H13 Steel by Pulsed Dc PECVD and Its Application for Hot-Working Dies

Friction and Wear Behavior of Plasma Nitrided Steel under Lubrication of Zinc Dialkyldithiophosphate

Effect of AISI H13 Steel Substrate Nitriding on AlCrN, ZrN, TiSiN, and TiCrN Multilayer PVD Coatings Wear and Friction Behaviors at a Different Temperature Level

Wear-resistance Performance of Spray-welding Coating by Plasma Weld-surfacing