Abstract:Silty sand can be prone to erosion because it is short of stability cementation materials. In recent years, various emerging soil stabilizers, especially natural organic substance and polymer, have been used to improve soil strength, water stability and ability of erosion resistance. In this study, a new type of soil stabilization additive modified carboxymethyl cellulose (M-CMC), consisting of carboxymethyl cellulose (CMC) and polyacrylamide (PAM), was developed for stabilization treatment of silty sand. A series of laboratory tests were conducted to evaluate the performance of M-CMC application on shear strength, permeability, water susceptibility and microstructure of the silty sand soil treated with additive concentration range of 0% - 1.3%. Moreover, rainfall simulation experiments were conducted to evaluate the effect of M-CMC on the erosion control of silty sand which compacted soil in a large-sized runoff (1 m2) plots. Test plot which treated with 1.1% concentration of soil stabilizer and control plot which treated with same amount of water were cured outdoor for 50 days before rainfall simulation test. Rainfall intensity was applied at 120 mm·h-1 for 60 min. Finally, a field test is performed in order to assess the practical application effect of silty sand with 1.1% M-CMC. In general, the results showed that an increase of the concentration of M-CMC resulted in an improvement in water susceptibility and shear strength but a decrease in the infiltration rate. Internal friction angle of the treated soil remarkably increased under a low M-CMC concentration (less than 0.7%), while cohesion of them sharply increased under a relatively high M-CMC concentration (larger than 0.7%). Water susceptibility of the treated samples was improved remarkably under a relatively high M-CMC concentration (larger than 0.7%). Permeability coefficient of them decreased significantly when the M-CMC concentration was increased from 0 to 0.5% and, then, from 0.9% to 1.3%. Based on the images obtained from a scanning electron microscopy (SEM), the “coating” and “netting” effects were attributable to the observed improvement of the treated soil. When a plot was protected by a thin layer of soil treated with 1.1% MCMC, its erosion resistance was greatly improved, infiltration rate of water and soil loss yield of plot decreased greatly and even though under a rainfall intensity of 120 mm·h-1. The field test with long-term monitoring (three years) confirmed the M-CMC can effectively control erosion of silty sand slopes for a prolonged period of time.

Sand fixation property and erosion control through new cellulose-based curing agent on sandy slopes under rainfall

Impact of polymer mixtures on the stabilization and erosion control of silty sand slope

Desert silty sand modified by anionic PAM and ordinary portland cement: Microfabric reinforcement and durability

Synergistic effect of Polyvinyl Acetate (PVA) and Enzyme-Induced Carbonate Precipitation (EICP) on the mechanical properties of natural sands

Molecular Dynamics Study on the Adsorption and Modification Mechanism of Polymeric Sand-Fixing Agent

Effectiveness of a New Organic Polymer Sand-Fixing Agent on Sand Fixation

Cracking and erosion behaviors of sand-clay mixtures stabilized with microbial biopolymer and palm fiber

Preparation and Properties of Bio-Based Attapulgite Copolymer (BAC) Sand-Fixing Material

Effects of several polymeric materials on the improvement of the sandy soil under rainfall simulation

Fabrication of Grafted Carboxymethyl Cellulose Superabsorbent Hydrogel for Water Retention and Sustained Release of Ethephon in Sandy Soil

Mechanical properties of aeolian sand cemented via microbially induced calcite precipitation (MICP)

Experimental investigation of sandy soil stabilization using chitosan biopolymer

Experimental Study on PVA-MgO Composite Improvement of Sandy Soil

The Role of Biopolymers on the Water Retention Capacity of Stabilized Sand

Experimental Study on Cyclic Behavior of Aeolian Sand Stabilized with Geopolymer and Fines

Fiber-Reinforced Microbially Induced Carbonate Precipitation (MICP) for Enhancing Soil Stability: Mechanisms, Effects, and Future Prospects

Preparation and Performance Evaluation of Quaternary Copolymer Sand Control Agent

Characterization and Resistance Against the Combined Effect of Chloride Erosion and Freeze–thaw Cycling of Sticky Rice Lime Paste Enhanced by Cellulose Fiber and Fly Ash

Multivariate Experimental Study on EICP Combined with Polypropylene Fiber Solidified Desert Sand

Investigation of the Mechanical Properties of Reinforced Calcareous Sand Using a Permeable Polyurethane Polymer Adhesive

Optimizing the Compressive Strength of Sodium Alginate-Modified EICP-Treated Sand Using Design of Experiments