Abstract:Silver nanowire‐decorated silicon nanomembrane (AgNW‐SiNM) wireless wearable gas sensor exhibits a high response of ≈1.83 upon exposure to 10 ppm NH3. A stacked structure of the AgNW‐SiNM gas sensor with a flexible Joule heater improves the recovery rate after gas exposure. An integrated wireless communication system enables real‐time monitoring and storage of environmental information via portable electronics. Wearable wireless gas sensors have attracted enormous interest due to precise, real‐time healthcare and environmental monitoring without temporal and spatial limitations. Among various toxic gases, detecting ammonia is crucial because of its highly hazardous nature and applicability as a noninvasive biomarker for diagnosing health conditions. In this study, silver nanowires‐decorated silicon nanomembrane (AgNW‐SiNM) chemiresistive gas sensor with high selectivity to ammonia is fully integrated with an ultrathin flexible Joule heater and wireless communication system to fabricate wearable wireless real‐time toxic gas monitoring system. The sensor exhibits improved performance to ammonia gas, attributed to heating‐induced changes in adsorption/desorption rates, along with electronic and chemical sensitization facilitated by AgNW decoration. The gas sensing system exhibits stable and high responses of ≈1.83, 1.47, and 1.19 on the ammonia exposure at concentrations of 10, 5, and 1 ppm even under mechanical deformations. The real‐time dynamic response of the sensor is wirelessly transmitted to portable electronics and displayed on the screen. Moreover, the system alerts the users in advance through the integrated haptic interface when exposed to dangerous gas environments for early evacuation. The system paves the way for timely warnings from hazardous gas and more accurate noninvasive medical diagnosis related to respiratory disorders.

Bioelectronic protein nanowire sensors for ammonia detection

A Hydrogel-Modified Electrochemical Biosensor for the Rapid Detection of Ammonia‑nitrogen-Resistant Bacteria

Ammonia Sensing Using Arrays of Silicon Nanowires and Graphene

Facile, Low‐Cost and Flexible Ammonia Sensor Arrays Based on Metallic Ion Charge Carriers and Polymer Matrices

Room Temperature Ammonia Gas Sensor Based on Ionic Conductive Biomass Hydrogels

Highly Sensitive Ammonia Gas Detection at Room Temperature by Integratable Silicon Nanowire Field-Effect Sensors

III–V nanowires for ammonia detection

Wireless Detection of Biogenic Amines Using a Split-Ring Resonator with Silver Nanoparticles-Decorated Molybdenum Disulfide

Wireless Flexible System for Highly Sensitive Ammonia Detection Based on Polyaniline/Carbon Nanotubes

A Wireless Wearable Sensor System Based on a Silver Nanowire‐Decorated Silicon Nanomembrane for Precise and Continuous Hazardous Gas Monitoring

Three-dimensional conductive organic sulfonic acid co-doped bacterial cellulose/polyaniline nanocomposite films for detection of ammonia at room temperature

Long-Range Epitaxial MOF Electronics for Continuous Monitoring of Human Breath Ammonia.

A Portable Electrochemical Room-Temperature Sensor Based on Flower-Like Structure UIO-66-NH2@MoS2 Composite for Ammonia Detection

Graphene Oxide-Coated Mach-Zehnder Interferometer Based Ammonia Gas Sensor

Development of low-cost hybrid multi-walled carbon nanotube-based ammonia gas-sensing strips with an integrated sensor read-out system for clinical breath analyzer applications

Porous Oxide-Functionalized Seaweed Fabric As a Flexible Breath Sensor for Noninvasive Nephropathy Diagnosis.

Wearable facemask-attached disposable printed sensor arrays for point-of-need monitoring of ammonia in breath

A novel ammonia sensor based on high density, small diameter polypyrrole nanowire arrays

Ultrasensitive Flexible Self-Powered Ammonia Sensor Based on Triboelectric Nanogenerator at Room Temperature

A Flexible Ammonia Sensor Based on MXene Membrane with High Sensitivity

Multifunctional Protein Nanowire Humidity Sensors for Green Wearable Electronics