Abstract:A resistive-type flexible ammonia (NH3) sensor was proposed and developed in this work, which was prepared by depositing polyaniline-cerium dioxide (PANI-CeO2) nanocomposite thin film on flexible polyimide (PI) substrate through in-situ self-assembly method. The effect of CeO2 nanoparticles on the polymerization of aniline was studied by comparing the morphological, structural and chemical features of the pure PANI and PANI-CeO2 nanocomposite, and the dynamic polymerization processes were also recorded and investigated. In this process, an interesting phenomenon was found that the protonation and oxidation degrees of PANI in PANI-CeO2 nanocomposite were improved significantly according to the XPS spectra analysis, which should be ascribed to the synergetic oxidation of CeO2 nanoparticles and ammonium persulfate (APS). Meanwhile, the NH3-sensing performances of the pure PANI and PANI-CeO2 film sensors were evaluated at room temperature (similar to 25 degrees C), which showed that the PANI-CeO2 film sensor possessed enhanced response, reduced recovery time, perfect response-concentration linearity, good reproducibility, splendid selectivity, remarkable long-term stability, ultra-low detectable concentration (16 ppb) and theoretical detection limit (0.274 ppb), and outstanding flexibility without significant response decrease after 500 bending/extending cycles. It was speculated that the excellent sensing performances should probably benefit from the gas-sensing enhancement effect of p-n junction, the improved protonation degree and modified morphology of PANI by the addiction of CeO2 nanoparticles. And, the high flexibility might originate from the flexible structure of PANI chains, and the good adhesion and nano-mechanical performance of PANI-CeO2 film. Besides, the effect of relative humidity on the sensing properties of PANI-CeO2 film sensor was also discussed and analyzed. Therefore, the proposed high-performance flexible PANI-CeO2 thin film sensor holds great promise for application into hand-held or wearable electronic devices for trace-level NH3 detection at room temperature. (C) 2017 Elsevier B.V. All rights reserved.

Wireless Flexible System for Highly Sensitive Ammonia Detection Based on Polyaniline/Carbon Nanotubes

Flexible Room-Temperature Ammonia Gas Sensors Based on PANI-MWCNTs/PDMS Film for Breathing Analysis and Food Safety

Wearable Gas Sensor Based on Reticular Antimony-Doped SnO2/PANI Nanocomposite Realizing Intelligent Detection of Ammonia Within a Wide Range of Humidity.

A wearable mask sensor based on polyaniline/CNT nanocomposites for monitoring ammonia gas and human breathing

Wearable Gas Sensor Based on Reticular Antimony-Doped SnO 2 /PANI Nanocomposite Realizing Intelligent Detection of Ammonia within a Wide Range of Humidity

Facile, Low‐Cost and Flexible Ammonia Sensor Arrays Based on Metallic Ion Charge Carriers and Polymer Matrices

Adaptable Ammonia Detection with QDs Sensitized Polyaniline Mat: A Flexible Gas Sensor for Diverse Applications

A Wireless Wearable Sensor System Based on a Silver Nanowire‐Decorated Silicon Nanomembrane for Precise and Continuous Hazardous Gas Monitoring

Multi-walled carbon nanotubes/polyaniline on the ethylenediamine modified polyethylene terephthalate fibers for a flexible room temperature ammonia gas sensor with high responses

Polyaniline/Graphene-Functionalized Flexible Waste Mask Sensors for Ammonia and Volatile Sulfur Compound Monitoring

A Flexible Ammonia Sensor Based on MXene Membrane with High Sensitivity

Pt/MoS2/Polyaniline Nanocomposite as a Highly Effective Room Temperature Flexible Gas Sensor for Ammonia Detection

Highly Sensitive Ammonia Gas Detection at Room Temperature by Integratable Silicon Nanowire Field-Effect Sensors

Flexible Room-Temperature NH3 Sensor for Ultrasensitive, Selective, and Humidity-Independent Gas Detection

In Situ-Polymerized PANI/WS2 Nanocomposites for Highly Sensitive Flexible Ammonia Gas Sensors and Respiration Monitoring Devices

A Wearable Electrochemical Gas Sensor for Ammonia Detection

Self-assembled Deposition of Polyaniline/cobalt Porphyrin Based on Flexible PET to Improve Sensing of Room-Temperature NH3 Sensor

A High-Performance Flexible Gas Sensor Based on Self-Assembled PANI-CeO2 Nanocomposite Thin Film for Trace-Level NH3 Detection at Room Temperature

Self-Healing, Laminated, and Low Resistance NH3 Sensor Based on 6,6,6"-(Nitrilotris(benzene-4,1-diyl))tris(5-phenylpyrazine-2,3-dicarbo Nitrile) Sensing Material Operating at Room Temperature

1D/2D Heterostructured WS2@PANI Composite for Highly Sensitive, Flexible, and Room Temperature Ammonia Gas Sensor

Flexible and High Performance Ammonia Sensor Based on Self-Assembled PANI-TiO2-Au Ternary Composite Film