Abstract:The exceptional structural strength and low cost of steel-concrete composite columns make them a popular choice for civil engineering structures. Numerous forms of composite columns, including steel tubes filled with concrete, have been produced recently in response to various construction situations. Cold-formed steel tubular columns with concrete filling have higher strength and ductility due to their capacity to withstand inner buckling and postpone outward buckling. The objective of this research is to determine the ductile and strength performance of composite columns containing various forms of fibre-reinforced concrete when subjected to axial compression. Several different kinds of fibre-reinforced concrete (FRC) are employed as additives in hollow steel columns, including steel FRC, carbon FRC, glass FRC, coir FRC, jute FRC, and sisal FRC. Axial compression tests were performed on 24 columns, including three hollow steel columns and 21 composite columns. Three distinct slenderness ratios were developed and used. Axial bearing capacity, compressive stress-strain curves, ductility, peak strain, axial shortening, and toughness were among the topics covered by the axial compression test. Experimental findings demonstrated that all conventional composite columns experienced failure through overall buckling, Local buckling and crushing of concrete infill, which was transformed into more ductile failure using fibre-reinforced concrete infills. The test results revealed that fibre-reinforced concrete-infilled steel columns outperformed conventional composite columns in terms of strength, ductility, and energy absorption capacity. The percentage increase in load-carrying capacity was observed as 203.88%, 193.48% and 190.03% when compared to hollow cold-formed steel tubular columns in stub, short and medium columns, respectively. Under assessment of stub, short, and medium columns, the load-strain plots demonstrated that the steel fibre-reinforced concrete in-filled columns performed well in terms of ductility. Localized buckling and crushing of the concrete infill caused the composite columns with low slenderness ratios to fail. In contrast, concrete-filled steel tube columns with higher slenderness ratios showed column failure through the overall buckling of the composite column.

Experimental and Numerical Analysis of Battened Built-up Lightweight Concrete Encased Composite Columns subjected to Axial Cyclic loading

Behavior of Eccentrically Loaded Large-Scale CFST Slender Columns with Latticed Annular Steel

Numerical Investigation on Compressive Performance of CFST Columns with Encased Built-Up Lattice-Angles

Experimental Investigation of the Axial Behaviour for Battened Tubular Columns

Mechanical Behavior of Masonry Columns Strengthened with Basalt Textile Reinforced Concrete under Eccentric Loading: Experimental Investigation and Analytical Modelling

Experimental and numerical behavior of eccentrically loaded square concrete-filled steel tubular long columns made of high-strength steel and concrete

Axial compressive behaviour of thin-walled composite columns comprise high-strength cold-formed steel and PE-ECC

Behaviour of Hexagonal Concrete-Encased CFST Columns Subjected to Cyclic Bending

Effect of Geometric and Material Properties on the Behavior of Axially Loaded Concrete-Filled Stainless Steel Tube Columns

Analytical Behaviour of Eccentrically Loaded Concrete-Encased Cfst Box Columns

Experimental Investigation on the Axial Compressive Behaviour of Cold-Formed Steel-Concrete Composite Columns Infilled with Various Types of Fibre-Reinforced Concrete

Behaviour of reinforced and concrete-encased composite columns subjected to biaxial bending and axial load

Numerical modelling of concrete-filled stainless steel slender columns loaded eccentrically

Experimental Study on Concrete-Encased Composite Columns with Separate Steel Sections

Adoption of hooped-battens in cold-formed steel built-up columns for superior axial performance

Experimental study of slender concrete-filled elliptical hollow section beam-columns

Behaviour of Composite Joints with Concrete Encased Cfst Columns under Cyclic Loading: Experiments

Investigation of axial-flexural behaviour of concrete-encased concrete-filled steel tube slender beam–columns

Analytical Behavior of Concrete-Encased CFST Columns under Cyclic Lateral Loading

Axial Compression Test and Numerical Investigation of Concrete-Filled Double-Skin Elliptical Tubular Short Columns

Experimental study of concrete-filled rectangular HSS columns subjected to biaxial bending