Abstract:Biomass carbon-coated and pseudocapacitance-assisted α-Fe2O3 has recently gained more attention for enhanced lithium storage performance. Herein, we used a waste poplar branch as a biotemplate and a carbon source to prepare graphitic-C-doped mesoporous α-Fe2O3 (α-Fe2O3/C) through a simple immersion–carbonization–calcination method. The influence of carbon content on both the microstructures and electrochemical properties was also studied. The product calcined in air at 400 °C (Fe2O3/C400) presents a hierarchically tubular structure with cross-linkage of 18% graphitic-C and α-Fe2O3 nanoparticles with an average size of ∼28 nm. Meanwhile, the Fe2O3/C400 nanomaterial exhibits a large surface area of 114 m2 g–1 and mesopore size distribution centered at 2 nm. As lithium-ion battery anode material, such a unique hierarchical structure presents a certain pseudocapacitance behavior, thus improving its lithium storage performance. Electrochemical measurements show that the Fe2O3/C400 nanomaterial exhibits higher specific capacity and better rate performance. Especially, it can retain a capacity of 885 mA h g–1 at 1 A g–1 after cycling 1400 times, indicating good capacity retention and long-cycling stability. The good electrochemical performance mainly originates from the synergism of the unique microstructure of the Fe2O3/C400 nanomaterial, suitable doping of graphitic-C, and certain pseudocapacitance behavior. Thus, the low-cost bifunctional biotemplate strategy can provide a useful experience for the massive synthesis of pseudocapacitance-assisted high-performance anodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c00649?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c00649</a>.Material characterization, assembly and electrochemical test of half-cells; XPS spectra of Fe2O3/C450 (Figure S1); N2 adsorption–desorption isotherm and pore size distribution of Fe2O3/C450 (Figure S2); long-cycling discharge performance of the Fe2O3/C400 electrode at 3.0 A g–1 (Figure S3); TG curve in air, XRD pattern, and cyclic performance of Fe2O3/C400-1 h electrode at 1.0 A g–1 (Figure S4); Li+-ion diffusion coefficient (Figure S5); TEM images of Fe2O3/C400 and Fe2O3/C450 electrodes before and after cycling 1000 times (Figure S6); and comparison of long cycle performance of carbon-doped Fe2O3 composites (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c00649/suppl_file/an1c00649_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Maleamic Acid as an Organic Anode Material in Lithium-Ion Batteries

Maleamic Acid as an Organic Anode Material in Lithium-Ion Batteries

Ultrahigh-Capacity Organic Anode with High-Rate Capability and Long Cycle Life for Lithium-Ion Batteries

Lithium and Potassium Cations Affect the Performance of Maleamate-Based Organic Anode Materials for Potassium- and Lithium-Ion Batteries

Nitrogen‐Doped Hollow Porous Carbon Bowls Optimizing Maleic Acid Dissolution for Fast Kinetic and Long‐Life Lithium‐Organic Batteries

Organic Anodes with Nearly 100% Initial Coulombic Efficiency Enabled by Wet‐Chemically Constructed Artificial Solid‐Electrolyte Interphase Film toward High‐Energy‐Density Organic Full Batteries

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

Synthesis and Characterization of Chelidonic Acid and Chelidamic Acid as Organic Anode Materials for Energy Storage

Synthesis, characteristics, and electrochemical performance of N,N-(p-phenylene)bismaleamate and its fluorosubstitution compound on organic anode materials in lithium-ion batteries

A Highly Immobilized Organic Anode Material for High Performance Rechargeable Lithium Batteries

Controllable Synthesis of Hollow MnFe2O4 by Self-Etching and Its Application in High-Performance Anode for Lithium-Ion Batteries

Carbon-Coated Li3 VO4 Spheres As Constituents of an Advanced Anode Material for High-Rate Long-Life Lithium-Ion Batteries.

Graphitic Carbon-Doped Mesoporous Fe 2 O 3 Nanoparticles for Long-Life Li-Ion Anodes

Designing spacial skeleton for lithium metal anode with Li+ concentration regulation and interfacial modification

An Ultrastrong 3D Architecture Interface with Fast and Smooth Li-ion Deposition for High-Capacity Li Metal Anode

Surface Modifications of Carbon Materials Used As Anode of Lithium Ion BatteryⅡ.The Carbon Material with Core Shell Structure and Its Positive Effect on Cell Performance of Graphite Anode

A Novel 3D Li/Li9Al4/Li‐Mg Alloy Anode for Superior Lithium Metal Batteries

Advances of Carbon-Based Materials for Lithium Metal Anodes

Engineering a heteroatom-doped multidimensional carbon network for dendrite-free lithium metal anode

Facile Lithium Densification Kinetics by Hyperporous/Hybrid Conductor for High‐Energy‐Density Lithium Metal Batteries

Aqueous Lithium-Ion Batteries Using Polyimide-Activated Carbon Composites Anode and Spinel LiMn2O4 Cathode