Abstract:Due to the local inhomogeneous magnetic saturation of the core of the interior permanent magnet synchronous motor (IPMSM), the magnetic field changes nonlinearly, which makes the analytical calculation of the magnetic field difficult. Therefore, the calculation of the magnetic field mostly relies on the finite element method (FEM). However, the high computation cost of FEM restricts the efficiency of the design and analysis of IPMSM. In this article, an analytical model (AM) of slotless open-circuit air-gap magnetic field (OC-AG-MF) of IPMSM with V-shaped segmented skewed poles is derived by combining the subdomain method (SDM) and the magnetic equivalent circuit (MEC) method, and then, the AM of slotted OC-AG-MF of IPMSM with V-shaped segmented skewed poles is obtained by introducing the complex relative permeance. To show the effectiveness of the novel AM, the OC-AG-MF and cogging torque of an IPMSM with V-shaped segmented skewed poles for electric vehicles are calculated by the AM and FEM, respectively. The spatial order, amplitude–frequency characteristics, and the 3-D spatial distribution of the OC-AG-MF are analyzed. Finally, the accuracy of the AM is experimentally verified by direct measurement of OC-AG-MF and no-load back electromotive force (EMF) of the motor. The AM proposed in this article is shown to accurately calculate the radial and tangential components of OC-AG-MF of IPMSM with V-shaped segmented skewed poles considering rotor magnetic bridge saturation effect and stator slotting effect. Meanwhile, the efficiency of the design and analysis of the motor is expected to be improved due to the reduced computational effort compared to the prevalent FEM.

Influence of the opening width of stator semi‐closed slot and the dimension of the closed slot on the magnetic field distribution and temperature field of the permanent magnet synchronous motor

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Influence of Stator Topologies on Average Torque and Torque Ripple of Fractional-Slot SPM Machines with Fully Closed Slots

Solution of Permanent Magnet Synchronous Motors with Partition between Poles Halbach Magnet

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Modeling and Simulation of a Novel Low-Speed High-Torque Permanent Magnet Synchronous Motor with Asymmetric Stator Slots

Investigation of Analytical Models for Surface-Mounted Permanent Magnet Motor Using Voltage Source Inverter

Multi-field Coupled Analysis of a Permanent Magnet Synchronous Motor: Application to High Speed Rail Traction

Magnetic Field Characteristics and Stator Core Losses of High-Speed Permanent Magnet Synchronous Motors

Multi-field Coupling Finite-Element Analysis of the Temperature Rise in Permanent Magnet Synchronous Motor Applied for High Speed Train

Influence of Dimensional Parameters on Three-Phase Short Circuit and Demagnetization in Surface-Mounted PM Machines

Number of Stator Slot and Air Gap Length's Effect on Permanent Magnet Brushless Motor

Investigation and Analysis of the Influence of Magnetic Wedges on High Voltage Motors Performance

Analytical Calculation of Magnetic Field Distribution and Stator Iron Losses for Surface-Mounted Permanent Magnet Synchronous Machines

Improved Open-Circuit Airgap Field Model for FSCW-STPM Machines Considering PM-MMF Fluctuation

Performance Evaluation of a Permanent Magnet Brushless DC Machine with Auxiliary Stator Slots

Open-Circuit Air-Gap Magnetic Field Calculation of Interior Permanent Magnet Synchronous Motor With V-Shaped Segmented Skewed Poles Using Hybrid Analytical Method

Thermal Analysis of Stator Iron-Core-Less PMBLDC Motors Considering Both Winding Eddy and Circulating Current Losses

Loss And Temperature Rise Analysis of Permanent Magnet Motor Based on Magneto-thermal Coupling Field

Analytical modelling of air‐gap magnetic field of interior permanent magnet synchronous motors