Numerical investigation of short-to-intermediate fixed-ended stainless steel bolted starred equal-leg angle columns
F.R. Sarquis,L.R.O. de Lima
DOI: https://doi.org/10.1016/j.jcsr.2024.108557
IF: 4.349
2024-04-01
Journal of Constructional Steel Research
Abstract:This study presents a numerical investigation of short-to-intermediate austenitic and duplex stainless steel bolted starred columns with fixed supports, i.e., susceptible to failure by torsional buckling. A solid finite element model was developed and validated against experimental results to assess (i) the columns' elastic buckling behaviour, (ii) elastic post-buckling behaviour equilibrium paths, (iii) initial geometric imperfection sensitivity, (iv) influence of material mechanical properties of austenitic and duplex stainless steel, and (v) the columns' ultimate failure load. A parametric analysis was performed through typical compact equal-leg angle cross-sections (i.e., b/t < 20) and selecting column lengths susceptible to torsional buckling failure based on the elastic buckling behaviour. Finally, the numerical ultimate strengths obtained are used to assess whether the design provisions of Eurocode 3: Part 1.4 – column buckling curve “b” – can accurately forecast the ultimate load. Discrepancies between the numerical failure load and the predicted Eurocode buckling ultimate torsional load revealed unduly conservatism. Consequently, two proposed modifications to the European code are suggested, involving a cross-section classification and change of the current buckling curve “b”.
construction & building technology,engineering, civil