Abstract:Textile Research Journal, Ahead of Print. The traditional tension control method with tension as the control target is to uniformly control multiple warp beams and has low control accuracy. Simultaneously, it is difficult to install an independent sensor for a single warp beam to achieve a closed-loop control, due to the space limitation. Combined with the theoretical model, this paper proposes a novel method to achieve the closed-loop unwinding tension control of warp beams by taking the unwinding length as the control target and using the self-developed turns measuring device. First, the dynamic model between different factors and unwinding tension was established in this study. Furthermore, the influence of unwinding radius, unwinding speed and winding density on the tension was investigated to clarify the fluctuation mechanism. Based on these, simulation experiments were conducted for verifying the control effect of the proposed method. The results showed that the proposed single warp beam unwinding tension control method can achieve constant tension throughout the unwinding process, which is superior to the empirical open-loop control method that adjusts the tension according to the linear proportional change of the braking torque. Meanwhile, it has the similar control effect as the ideal closed-loop tension control method, maintaining stability under different reference tensions and disturbances. In addition, the proposed multiple warp beams unwinding tension control method also outperformed the traditional unified tension control method. Our measuring device can be easily installed on the single warp beam for control, resulting in consistent tension between multiple warp beams. Therefore, the proposed methods have a certain control effect and application value.

Dynamics Modeling and Tension Control of Composites Winding System Based on ASMC

Modeling of Tension Control System with Passive Dancer Roll for Automated Fiber Placement

The Research of the Tension Control System of Optical Fiber Coil Winding Machine

DYNAMIC CONTROL OF TENSION STRUCTURES

Fiber Tension Prediction and Control Methods in Automated Fiber Placement

A New Fiber Winding Precisiong Tension Control System

Control strategy for single-layer warp tension in a carbon fiber 3D loom based on fixed-time theory and sliding mode theory

Dynamics modeling and performance verification of the mechanical flight control system on transport airplane

Digital control system of tension during the formation of flexible-oriented three-dimensional composite preforms

THE DEVELOPMENT OF A NEW TENSION CONTROL SYSTEM FOR AUTOMATED FIBER PLACEMENT MACHINE

Design of tension control of a winding machine for rectangular component

Adaptive RISE Control of Winding Tension with Active Disturbance Rejection

Tension Control System for Spin-Draw-Winder Used in Vacuum Coating

Development of a Tension System and Influence of Ultimate Tension on the Properties of Composites

Tension relaxation during the NOL ring winding process based on a novel tracking element method

Tc Control of Web Winding System Based on Active Compensation

Dynamic tension control for warp beams on sizing machine based on unwinding length monitoring

The Development of Application Software of Fiber Winding Tension Control System

Fiber Winding Precision Tension Fuzzy Control System

Accurate Modal Analysis Method For Automotive Drive Motors Considering Composite Structures And Impregnating Windings In The Design Phase

Building Up Of Tension Control Experimental System Based On Magnetorheological Damper