Abstract:Textile Research Journal, Ahead of Print. The traditional tension control method with tension as the control target is to uniformly control multiple warp beams and has low control accuracy. Simultaneously, it is difficult to install an independent sensor for a single warp beam to achieve a closed-loop control, due to the space limitation. Combined with the theoretical model, this paper proposes a novel method to achieve the closed-loop unwinding tension control of warp beams by taking the unwinding length as the control target and using the self-developed turns measuring device. First, the dynamic model between different factors and unwinding tension was established in this study. Furthermore, the influence of unwinding radius, unwinding speed and winding density on the tension was investigated to clarify the fluctuation mechanism. Based on these, simulation experiments were conducted for verifying the control effect of the proposed method. The results showed that the proposed single warp beam unwinding tension control method can achieve constant tension throughout the unwinding process, which is superior to the empirical open-loop control method that adjusts the tension according to the linear proportional change of the braking torque. Meanwhile, it has the similar control effect as the ideal closed-loop tension control method, maintaining stability under different reference tensions and disturbances. In addition, the proposed multiple warp beams unwinding tension control method also outperformed the traditional unified tension control method. Our measuring device can be easily installed on the single warp beam for control, resulting in consistent tension between multiple warp beams. Therefore, the proposed methods have a certain control effect and application value.

Tension Control System for Spin-Draw-Winder Used in Vacuum Coating

The Research of the Tension Control System of Optical Fiber Coil Winding Machine

Modeling of Tension Control System with Passive Dancer Roll for Automated Fiber Placement

Tension and velocity control system for steel wire winch based on industrial computer

Research on the Winding/Unwinding Control System Based on Fuzzy Control Theory

DYNAMIC CONTROL OF TENSION STRUCTURES

Fiber Tension Prediction and Control Methods in Automated Fiber Placement

Building Up Of Tension Control Experimental System Based On Magnetorheological Damper

Dynamic tension control for warp beams on sizing machine based on unwinding length monitoring

Research on the Mechanism of Variable Stiffness of the Twisted and Coiled Polymer Actuator During Saturated Contraction

Study on Coil Tension Fuzzy Control by Rotary Magnetorheological Damper

A Numerical Model of Heating and Cooling Cycles to Study the Driven Response for Twisted and Coiled Polymer Actuator

Modelling and experimental validation of dynamic characteristics of porous-walled air film for non-contact conveyor system

Design of tension control of a winding machine for rectangular component

Digital control system of tension during the formation of flexible-oriented three-dimensional composite preforms

Design of the five-axis NC fiber winding machine and its tension system

Dynamics Modeling and Tension Control of Composites Winding System Based on ASMC

Optimization of taper winding tension in roll-to-roll web systems

A High-Precision Constant Wire Tension Control System for Improving Workpiece Surface Quality and Geometric Accuracy in WEDM

Warp tension control system based on fuzzy-PI parallel control

Control strategy for single-layer warp tension in a carbon fiber 3D loom based on fixed-time theory and sliding mode theory