Abstract:The object of this research is electromechanical processes in a generator with an axial magnetic flux and a double stator and an additional non-contact excitation winding operating as part of autonomous electric power systems. The power of the additional excitation system is about 2 % of the generator power. The presence of an additional non-contact winding, which is powered by direct current, makes it possible to control the generator voltage by changing the excitation current. This resolves the task to stabilize the output voltage of the generator with permanent magnets when the load and shaft speed change. This paper reports the construction of a three-dimensional field axisymmetric mathematical model of the generator under study, which has made it possible to calculate and investigate its characteristics and parameters, in particular the magnitude of magnetic induction in all structural elements. The model built takes into account the influence of finite effects, magnetic scattering fields, and the radial-axial nature of the closure of the main magnetic flux and the magnetic flux of the additional excitation winding. The use of a structure with a double stator makes it possible to more efficiently utilize the usable volume of the generator and to increase its power. A mathematical model of the generator in the d-q coordinate system was built, which has made it possible to synthesize algorithms for controlling the automatic voltage stabilization system of the generator voltage under conditions of change in load and shaft speed. Control algorithms were developed on the basis of the concept of inverse dynamics problems in combination with minimizing local functionalities of instantaneous energy values, which ensures that the system is robust when changing generator parameters and that regulators are implemented in a simple way, due to the lack of differentiation operations. Based on the models built and algorithms developed, the quality of control of the generator's output voltage when the load and frequency of the generator change was investigated by modeling in the MATLAB/Simulink environment. When setting a jump in the rated load and changing the rotational speed within ±15 % of the rated value, the automatic stabilization system provides astatic voltage control at a given level of 48 V. The results can be practically used in the design of autonomous electric power systems with high energy conversion efficiency, in particular wind turbines and hydraulic units

The Axle Box Generator Efficiency Determination Using A Scalar Frequency Controlled Induction Electric Drive

New Load Rejection Test Method for Parameter Estimation of Synchronous Generators

On-line Measurement for Power Angle and Circuit Parameter in the Turbo Steam Generator with the FEM Based

Characteristic of Actual Output Based Generator Modeling

Research and calculation of magnetic system of built-in axle-box generators of freight cars

Unit Power Factor Control of Direct-Drive Permanent Magnet Wind Generator

Control and implementation of alternating current variable-frequency power dynamometer

A Novel Doubly Fed Induction Generator System with Fault Ride Through Capability

Numerical modeling and experimental validation of power loss and efficiency in an electric-drive axle system

Optimum Design of an Extended Range Generator for EVs Based on Taguchi Method

Electromagnetic Performance Analysis of Rim-Driven Generator

Research on an AC Variable-frequency Power Dynamometer Based on PWM Rectifier and Fuzzy Direct Torque Control

Design of an Electric Drive Axle for Heavy Duty Commercial Vehicles in the Long-Haul Application Under Consideration of Energy Consumption

Determination of Control Winding Current and Stator Frequency for Dual Stator-winding High-speed Induction Generator

Parameter Determination and Drive Control Analysis of Axial Flux Permanent Magnet Synchronous Motors

Experimental investigation and performance analysis of a direct-driven linear generator

Development of control algorithms for magnetoelectric generator with axial magnetic flux and double stator based on mathematical modeling

Online Inductance Identification of PMSM Based on High Frequency Signal Injection into Virtual Axis

INDIRECT METHOD OF ESTIMATION ON DRIVE TRAIN TORQUE FOR A WIND TURBINE USING DOUBLE-FED INDUCTION GENERATOR

Improving the Efficiency of the Axial Flux Machine with Hybrid Excitation

Application of Squirrel Cage Generator Control System Utilizing Direct Torque Control Method as the Shaft Generator in a Seagoing Ship