Abstract:Hole transporting materials (HTMs) play a crucial role in achieving highly efficient and stable perovskite solar cells (PSCs). Spiro-typed materials being the most widely used HTMs are commonly utilized with dopants, such as Li-TFSI, to improve their carrier mobility significantly. However, dopants could affect the morphology of hole transporting layer negatively by forming defects and pinholes which restrict the performance of devices. Here, we adopt the extended π-conjugated structures N-ethylcarbazole and dibenzothiophene to substitute the donor group 4-methoxyphenyl of spiro-OMeTAD, devising two novel HTMs, SC and ST, respectively. Notably, SC possesses low crystallinity and good solubility due to the existence of ethyl in side groups, leading to decent miscibility with Li-TFSI to prevent unfavorable phase-separation. The SC-based device delivers the best power conversion efficiency (PCE) of 21.76% which is higher than that of spiro-OMeTAD (20.73%), attributed to the formation of smooth and pinhole-free morphology. Moreover, it exhibits long-term stability and retains over 90% of initial PCE value for more than 30 days without encapsulation in ambient air. In contrast, the ST-based device suffers from dense pinholes induced by its relatively high crystallinity and poor solubility, resulting in a low PCE of 18.18% and inferior stability. Thus, it is effective to modify the side groups in spiro-typed HTMs with specific structures to obtain predictable properties, fabricating PSCs with high efficiency and stability facilely.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.chemmater.0c03772?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.chemmater.0c03772</a>.Synthetic routes of SC and ST; the method of hole mobility measurements; the details of stability test of devices; 1H and 13C NMR and MALDI-TOF spectra of the developed compounds; UPS spectra of perovskite and HTMs; TGA and DSC tests of HTMs; DFT result of spiro-OMeTAD; top view SEM images, AFM images, and cross-sectional SEM images of devices; TOF-SIMS mappings of the distribution of dopants in HTMs; UV–vis spectra of radical cation; the devices performance under various concentrations of HTMs and dopants; contact angle of HTMs in the solid state and the stability tests of devices; decomposition rate of perovskite coated by HTMs; and cost calculations (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.0c03772/suppl_file/cm0c03772_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Spiro-OMeTAD or CuSCN as a preferable hole transport material for carbon-based planar perovskite solar cells

Metal Organic Framework Doped Spiro-OMeTAD with Increased Conductivity for Improving Perovskite Solar Cell Performance

Efficient Planar Perovskite Solar Cells with Carbon Quantum Dot-Modified spiro-MeOTAD as a Composite Hole Transport Layer

Quasi-Planar Core based Spiro-Type Hole-Transporting Material for Dopant-Free Perovskite Solar Cells

Undoped 2,2′,7,7′-tetrakis (N,N-p-dimethoxy-phenylamino)-9,9′-spirobifluorene and PbS binary hole-transporter for efficient and stable planar perovskite solar cells

CuSCN as Hole Transport Material with 3D/2D Perovskite Solar Cells

De Novo Design of Spiro-Type Hole-Transporting Material: Anisotropic Regulation Toward Efficient and Stable Perovskite Solar Cells

Highly efficient and stable planar perovskite solar cells enabled by K3[Fe(CN)6]-doped spiro-OMeTAD

Solution-Processed Cu9S5 As a Hole Transport Layer for Efficient and Stable Perovskite Solar Cells.

Kesterite Cu 2 ZnSnS 4 as a Low-Cost Inorganic Hole-Transporting Material for High-Efficiency Perovskite Solar Cells

Double-layered hole transport material of CuInS2/Spiro for highly efficient and stable perovskite solar cells

Design of Low Crystallinity Spiro-Typed Hole Transporting Material for Planar Perovskite Solar Cells to Achieve 21.76% Efficiency

Molecular Orientation Regulation of Hole Transport Semicrystalline-Polymer Enables High-Performance Carbon-Electrode Perovskite Solar Cells

Realizing Efficient and Stable n-i-p Perovskite Solar Cells with CuSCN Hole Transporting Materials via LiSCN Doping and Interface Modulation

Effect of indium ratio in CuInxGa1-xS2/carbon hole collecting electrode for perovskite solar cells

Molecular modification of spiro[fluorene-9,9'-xanthene]-based dopant-free hole transporting materials for perovskite solar cells

Perovskite Solar Cells Employing a PbSO4(PbO)4 Quantum Dot-Doped Spiro-OMeTAD Hole Transport Layer with an Efficiency over 22

Demethylation strategies for spiro-OMeTAD to enhance the thermo-opto-electronic properties as potential hole transport materials in perovskite solar cells

In Situ Combined‐Hole Transport Layer for Highly Efficient Perovskite Solar Cells

A Trifluoroethoxyl Functionalized Spiro‐Based Hole‐Transporting Material for Highly Efficient and Stable Perovskite Solar Cells

Cyclization of methoxy groups on spiro-type hole transporting materials for efficient and stable perovskite solar cells