Abstract:Despite recent advances in leak detection in water supply systems, previous studies focused mainly on material aspects or orifice opening characteristics. This study evaluated geometric, hydraulic, and hydrodynamic factors influencing on water leaks using three-dimensional (3D) computational fluid dynamics (CFD) simulations. The simulated discharge coefficient (C-d) had a maximum absolute deviation of 8% compared with experimental data. The results indicated that the variation of C-d as a function of the diameter and orifice size can be attributed to the effect of tube curvature on flow convergence through the orifice. The statistical analysis concluded that the orifice-to-pipe diameter ratio d/D is the best dimensionless parameter that explains this phenomenon, which agreed with the analyses of the streamlines and turbulent eddy dissipation rate in the simulations. Other important dimensionless parameter are the ratio of the pressure head differential at the orifice to the pipe diameter Delta H/D, Reynolds number (R), and the ratio of the pressure head differential at the orifice to the wall thickness Delta H/e, in order of relevance. A set of empirical correlations was elaborated through a nonlinear multiple regression analysis with Reynolds numbers ranging between 12,000 and 52,000, and pressure head differential ranging from 1 to 45 m. This study advances the knowledge of cross-flows through orifices, and the proposed correlations potentially can improve the prediction of water leaks in pipes. (c) 2023 American Society of Civil Engineers. Practical Applications: This study demonstrates the applicability of computational fluid dynamics simulations for understanding the leakage phenomenon in pipes, and obtained a set of empirical correlations that potentially can improve the prediction of leakages in water distribution systems. The authors propose an equation for estimating the discharge coefficient in practical applications. This equation balances the number of terms (three dimensionless coefficients) and accuracy (R-2 = 98%). Although it is dimensionless, the correlation must be used within the established ranges of values to ensure its effectiveness: Reynolds numbers from 12,000 to 52,000, and pressure head differentials from 1 to 45 m.

Experimental and numerical effects of flow hydraulics and pipe geometry on leakage behavior of laboratory water network distribution systems

Two-dimensional Pipe Leakage Through a Line Crack in Water Distribution Systems

Effects of Leakage Points on Intrusion Volume in a Simulated Water Distribution System

Time-Series-Based Leakage Detection Using Multiple Pressure Sensors in Water Distribution Systems.

A Real-Time Method to Detect the Leakage Location in Urban Water Distribution Networks

Influence Factors Analysis on Foreign Intrusion Volume in a Simulated Water Distribution System

Three-dimensional pipe leakage assessment in water distribution system

Development of a novel mathematical model for leakage detection and localization in the water distribution system: based on the modification of the hydraulic model

Computational Simulation of the Flow Induced by Water Leaks in Pipes

An Integrated Bottom-Up Approach for Leak Detection in Water Distribution Networks Based on Assessing Parameters of Water Balance Model

Hydraulic Simulation of Water Supply Network Leakage Based on EPANET

Leakage Identification in Water Distribution Networks with Error Tolerance Capability

Leakage Reduction of Water Distribution Network System Based on the Observation Data of Water Leakage and Pressure of Actual Water Distribution Network System

Building of Pressure-driven Hydraulic Model for Water Supply Network and Its Application to Leakage Reduction

Transient Analysis of the Flow Behavior under a Small Leakage Accident in Feed Water Pipeline

Dynamic Effects of a Regulating Valve in the Assessment of Water Leakages in Single Pipelines

Numerical and Experimental Investigation on Leak Discharge-Pressure Relationship for Linear Elastic Deforming Pipes

Simulation of a Leak's Growth Process in Water Distribution Systems Based on Growth Functions

Leakage Localization in Water Distribution Networks: A Model-Based Approach

Towards more realistic stochastic modelling of leakage in water distribution systems

Estimation of leak area-pressure relationship for cracks on water pipes using models based on linear-elastic fracture mechanics