Abstract:The finite element (FE) model updating is a commonly used tool in civil engineering, enabling damage detection, design verification, and load capacity identification. In the FE modelupdating, acceleration responses are generally employed to determine modal properties of a structure, which are subsequently used to update the numerical model. While the acceleration-based model updating has been successful in finding better approximations of the physical systems, the boundary conditions are considered yet to be difficult to accurately estimate as the acceleration responses only correspond to the translational degree-of-freedoms (DOF).Recent advancements in the sensor technology have enabled low-cost, high-precision gyroscopes that can be adopted in the FE modelupdating to provide angular information of a structure. Especially, as the angular DOF is closely related to the rotational stiffness, gyroscopes in the FE model updating would give information of boundary conditions. This study proposes a FE modelupdating strategy based on data fusion of acceleration and angular velocity. The use of acceleration and angular velocity gives richer information than the sole use of acceleration, allowing the enhanced performance particularly in determining the boundary conditions. In this paper, a numerical simulation is presented to demonstrate the proposed FE modelupdating approach using the data fusion. A beam modelled using the Euler-Bernoulli beamelement is consideredwith various boundary conditions (i.e., simply supported, fixed supports, and in between). Optimization variables of the FE model updating are selected to be the elastic modulus and the rotational stiffness of two supports. The proposed FE modelupdating based on acceleration and angular velocityis shown to be able to more accurately identifythe boundary condition than the sole use of acceleration. Consequently, this paper verifies that data fusion of acceleration and angular velocity enhances the performance of the FE modelupdating. Graduate Research Assistant Research Assistant Professor Chair Professor 4) Assistant Professor

Finite-element-model updating of civil engineering structures using a hybrid UKF-HS algorithm

FE-based Bridge Weigh-in-motion Based on an Adaptive Augmented Kalman Filter

Robust improvement of the finite-element-model updating of historical constructions via a new combinative computational algorithm

Finite element model updating through derivative-free optimization algorithm

Bio-based Connections and Hybrid Planar Truss: A Parallel Genetic Algorithm Approach for Model Updating

Model updating for real time dynamic substructures based on UKF algorithm

Application of model updating to a large‐scale hybrid simulation

Selective online model updating in hybrid simulation of a full‐scale steel moment frame

Finite Element Model Updating Using Fish School Search Optimization Method

Model updating of a bridge structure using vibration test data based on GMPSO and BPNN: case study

Swarm Intelligent Optimization Conjunction with Kriging Model for Bridge Structure Finite Element Model Updating

Fuzzy finite element model updating using metaheuristic optimization algorithms

Finite element model updating for structural applications

Application of the artificial neural network and enhanced particle swarm optimization to model updating of structures

An application of different surrogate models to model updating of a heritage structure

A novel evolutionary algorithm for structural model updating with a hybrid initialization and multi-stage update strategy

Updating numerical models towards time domain alignment of structural dynamic responses with a limited number of sensors

A New Multi-Objective Approach to Finite Element Model Updating

Concurrent Multi-Scale Modelling and Updating of Long-Span Bridges Using a Multi-Objective Optimisation Technique

Finite Element Model Updating using Acceleration and Angular Velocity *Hyun-jun

Finite element model updating method for continuous girder bridges using monitoring responses and traffic videos