Abstract:The disposal of spent lithium-ion power batteries (LIBs) has become an important research topic owing to the booming market for electric vehicles. However, the recovery efficiency of the alkaline solution and organic solvent methods currently used to separate Al foil from cathode materials still has room for improvement. The insufficient separation of Al foil and complexity of the battery types present obstacles to the extraction of valuable metals using simple processes. In this study, an efficient approach is developed to separate the Al foil in mixed-type spent LIBs (M-LIBs), namely, LiNixCoyMnzO2 (NCM), LiFePO4 (LFP), and LiMn2O4 (LMO) LIBs, by controlled pyrolysis. Hundred percent of the Al foil was recovered at the temperature of 450 °C, holding time of 60 min, and heating rate of 10 °C/min. The purity of Al in the recovered foil was 99.41 %, 99.83 % and 99.92 %, and the recovery efficiency of the active cathode materials was 96.01 %, 99.80 % and 99.15 % for NCM, LFP and LMO, respectively, without the loss of active cathode materials. The obtained active cathode materials exhibited a favorable crystalline structure, and the average particle diameter was reduced from 300.497 to 24.316 μm with a smaller and looser morphology. The process could be well fitted with the Friedman differential equation, and the correlation coefficients were higher than 0.99. The efficient separation could be attributed to the complete rupture of long chain -(CH2CF2)-n bonds in the poly (vinylidene difluoride) (PVDF) binder, which resulted in the formation of HF, trifluorobenzene, alkanes, and gaseous single molecule CH2CF2. Therefore, this work potentially provides an alternative approach for the efficient separation of Al foil in M-LIBs, thereby simplifying the process and achieving lower cost, reduced loss of valuable metals, and higher recovery efficiency.

A Facile Chemical-Free Cathode Powder Separation Method for Lithium Ion Battery Resource Recovery

Removal of impurity metals as phosphates from Lithium-ion battery leachates

Removal of impurity elements from waste lithium-ion batteries powder by oxidation roasting, cyclic leaching, and precipitation method

Efficient separation and coprecipitation for simplified cathode recycling

Recycling Lithium-Ion Battery: Mechanical Separation of Mixed Cathode Active Materials

Recovery of cathode materials from waste lithium iron phosphate batteries through ultralow temperature treatment and mechanical separation

Recovery of Lithium and Heavy Non-Ferrous Metals from Spent Lithium-Ion Batteries

A Facile Route for the Efficient Leaching, Recovery, and Regeneration of Lithium and Iron from Waste Lithium Iron Phosphate Cathode Materials

Short-term and High-performance Recycling of Cathode Material from Spent Lithium Ion Batteries

An entire recycling of spent Al-bearing cathode powder as giniite sphere and lithiophophate plate with leaching-hydrothermal-precipitation process

Environment-friendly technology for recovering cathode materials from spent lithium iron phosphate batteries

Separation and recovery of valuable metals from spent lithium-ion batteries via concentrated sulfuric acid leaching and regeneration of LiNi1/3Co1/3Mn1/3O2

An Effective Relithiation Process for Recycling Lithium‐Ion Battery Cathode Materials

Resource Recovery of Spent Lithium-Ion Battery Cathode Materials by a Supercritical Carbon Dioxide System

A green process for exfoliating electrode materials and simultaneously extracting electrolyte from spent lithium-ion batteries

Green and non-destructive separation of cathode materials from aluminum foil in spent lithium-ion batteries

Efficient recovery of Al foil and regeneration of cathode materials from spent lithium-ion batteries with methanol-citric acid

Ultra-fast recovery of cathode materials from spent LiFePO 4 lithium-ion batteries by novel electromagnetic separation technology

Efficient separation of aluminum foil from mixed-type spent lithium-ion power batteries

A promising method for recovery of graphite and cathode materials from spent lithium-ion batteries

A novel method to recycle mixed cathode materials for lithium ion batteries