Efficient Cr(III) removal from effluent using functionalized Ficus benghalensis and Bambusa vulgaris bio-adsorbents
Maream Haque,Saidur Rahman Shakil,Md. Abdulla-Al-Mamun,Plabon Islam Turzo,Md. Abdul Mottalib,Mahmuda Hakim,Dipa Islam
DOI: https://doi.org/10.1016/j.ces.2024.120905
IF: 4.7
2024-11-23
Chemical Engineering Science
Abstract:Chromium contamination from tannery wastewater poses a significant threat to both the environment and public health, making its removal from effluents crucial before discharge into surface water. This study explores the effectiveness of activated bio-adsorbents made from cost-effective and sustainable sawmill waste Ficus benghalensis (banyan) bark and Bambusa vulgaris (bamboo) for removing Cr (III) from tannery wastewater. The easy accessibility and unique porous structure of these biomaterials make them strong candidates for Cr (III) pollution mitigation. Through carbonization and surface-functionalization via single and two-step methods, the single-step synthesized activated bio-adsorbent exhibited a superior chromium removal rate, achieving 94 % for activated carbon derived from banyan bark (ACBB), compared to 66 % for the two-step process (ACBB*). Single-step synthesis was chosen due to shorter carbonization time, practically viable, and better surface performance of materials. A similar pattern was observed for bamboo-derived activated carbon (ACB), with the one-step process yielding an 82 % removal rate, in contrast to 43 % for the two-step process (ACB*). The bio-absorbents were characterized using XRD, FTIR, BET, SEM, TGA, and zeta potential analysis. Batch process optimization reveals that ACBB and ACB demonstrate maximum chromium removal efficiencies of 92 % and 76 %, respectively, under specific pH, dosage, and temperature conditions. The adsorbents adhere to the Freundlich isotherm model, indicating multilayer adsorption, and follow pseudo-second-order kinetics, suggesting chemisorption. The maximum adsorption capacities were 278.44 mg/g for ACBB and 212.99 mg/g for ACB, which are considerably higher than the findings of previous researchers for similar materials. Thermodynamic analysis reveals that Cr (III) adsorption is spontaneous and endothermic for ACBB, while it is spontaneous and exothermic for ACB. Furthermore, the adsorbents maintain efficacy over three regeneration cycles with less than a 10 % reduction in performance. This research can facilitate efficient Cr (III) removal in industrial-scale tannery wastewater treatment due to its reusability and high adsorption performance, while also guiding future investigations. The potential of these eco-friendly bio-adsorbents for scalable, industrial tannery wastewater treatment offers a sustainable solution for chromium removal.
engineering, chemical